Abstract
A paper-based microfluidic device was used to quantitatively detect active enzyme analytes in samples at mid to low femtomolar levels. The device uses a hydrophobic oligomer that controls the wetting properties of the paper within the device. When the target analyte is present within the sample, the oligomer depolymerizes, thus switching the paper to hydrophilic, allowing for the sample to wick through the device. Measuring the time for the sample to wick to a control region relative to an assay region within the device results in sensitive, quantitative measurements of the target enzyme (e.g., alkaline phosphatase or β-d-galactosidase). This device requires the use of only a timer for quantifying a target analyte, and thus the platform may be appropriate for use in resource-limited environments, where access to expensive diagnostic equipment is limited. A smartphone with integrated application software (the software has yet to be developed) could be used for timing the assay and for relating the time measurement to the quantitative readout for the assay. In future versions of this assay, it should be possible to configure the smartphone to start and stop the time-based measurement to further simplify the assay for the user.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Yager P, Domingo GJ, Gerdes J (2008) Point-of-care diagnostics for global health. Annu Rev Biomed Eng 10:107–144
Yager P, Edwards T, Fu E, Helton K, Nelson K, Tam MR, Weigl BH (2006) Microfluidic diagnostic technologies for global public health. Nature 442:412–418
Urdea M, Penny LA, Olmsted SS, Giovanni MY, Kaspar P, Shepherd A, Wilson P, Dahl CA, Buchsbaum S, Moeller G, Hay Burgess DC (2006) Requirements for high impact diagnostics in the developing world. Nature 444:73–79
Peeling RW, Holmes KK, Mabey D, Ronald A (2006) Rapid tests for sexually transmitted infections (STIs): the way forward. Sex Transm Infect 82:v1–v6
Lewis GG, Robbins JS, Phillips ST (2013) Point-of-care assay platform for quantifying active enzymes to femtomolar levels using measurements of time as the readout. Anal Chem 85:10432–10439
Lewis GG, Robbins JS, Phillips ST (2013) Phase-switching depolymerizable poly(carbamate) oligomers for signal amplification in quantitative time-based assays. Macromolecules 46:5177–5183
Lewis GG, DiTucci MJ, Phillips ST (2012) Quantifying analytes in paper-based microfluidic devices without using external electronic readers. Angew Chem Int Ed 51:12707–12710
Robbins JS, Schmid KM, Phillips ST (2013) Effect of aromaticity on the rate of azaquinone methide-mediated release of benzylic phenols. J Org Chem 78:3159–3169
Mohapatra H, Phillips ST (2013) Reagents and assay strategies for quantifying active enzyme analytes using a personal glucose meter. Chem Commun 49:6134–6136
Carrilho E, Martinez AW, Whitesides GM (2009) Understanding wax printing: a simple micropatterning process for paper-based microfluidics. Anal Chem 81:7091–7095
Noh H, Phillips ST (2010) Fluidic “timers” for paper-based microfluidic devices. Anal Chem 82:8071–8078
Lewis GG, DiTucci MJ, Baker MS, Phillips ST (2012) High throughput method for prototyping three-dimensional, paper-based microfluidic devices. Lab Chip 12:2630–2633
Liu H, Xiang Y, Lu Y, Crooks RM (2012) Aptamer-based origami paper analytical device for electrochemical detection of adenosine. Angew Chem Int Ed 51:6925–6928
Xiang Y, Lu Y (2011) Using personal glucose meters and functional DNA sensors to quantify a variety of analytical targets. Nat Chem 3:697–703
Mateo C, Palomo JM, Fernandez-Lorente G, Guisan JM, Fernandez-Lafuente R (2007) Improvement of enzyme activity, stability and selectivity via immobilization techniques. Enzyme Microb Technol 40:1451–1463
Khan MS, Li X, Shen W, Garnier G (2010) Thermal stability of bioactive enzymatic papers. Coll Surf B 75:239–246
Phillips ST, Lewis GG (2013) Advances in materials that enable quantitative point-of-care assays. MRS Bull 38:315–319
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer Science+Business Media New York
About this protocol
Cite this protocol
Lewis, G.G., Phillips, S.T. (2015). Quantitative Point-of-Care (POC) Assays Using Measurements of Time as the Readout: A New Type of Readout for mHealth. In: Rasooly, A., Herold, K. (eds) Mobile Health Technologies. Methods in Molecular Biology, vol 1256. Humana Press, New York, NY. https://doi.org/10.1007/978-1-4939-2172-0_15
Download citation
DOI: https://doi.org/10.1007/978-1-4939-2172-0_15
Published:
Publisher Name: Humana Press, New York, NY
Print ISBN: 978-1-4939-2171-3
Online ISBN: 978-1-4939-2172-0
eBook Packages: Springer Protocols