1. Processing, microstructure, and mechanical properties of (Nb)/Nb₅Si₃ two-phase alloys

   • Yoshisato Kimura
   • Yoshinao Mishima
   • Nobuaki Sekido

   OriginalPaper Pages: 483 - 488

2. Effects of Zr on the eutectoid decomposition behavior of Nb₃Si into (Nb)/Nb₅Si₃

   • Seiji Miura
   • Miki Aoki
   • Yoshinao Mishima

   OriginalPaper Pages: 489 - 496

3. Microstructural properties of Nb-Si alloys investigated using EBSD at large and small scale

   • Stefan Drawin
   • Denis Boivin
   • Pierre Petit

   OriginalPaper Pages: 497 - 505

4. Phase stability and alloying behavior in the Mo-Si-B system

   • R. Sakidja
   • J. H. Perepezko

   OriginalPaper Pages: 507 - 514

5. Assessment of a powder metallurgical processing route for refractory metal silicide alloys

   • P. Jéhanno
   • H. Kestler
   • M. Jackson

   OriginalPaper Pages: 515 - 523

6. Optimization of Mo-Si-B intermetallic alloys

   • J. H. Schneibel
   • P. F. Tortorelli
   • J. J. Kruzic

   OriginalPaper Pages: 525 - 531

7. The effect of Nb and W alloying additions to the thermal expansion anisotropy and elastic properties of Mo₅Si₃

   • Taisuke Hayashi
   • Misako Takamoto
   • Katsushi Tanaka

   OriginalPaper Pages: 533 - 538

8. Partial phase relationships in Ir-Nb-Ni-Al and Ir-Nb-Pt-Al quaternary systems and mechanical properties of their alloys

   • C. Huang
   • Y. Yamabe-Mitarai
   • X. H. Yu

   OriginalPaper Pages: 539 - 545

9. Compressive creep properties of Ir-base refractory superalloys

   • Y. Yamabe-Mitarai
   • Y. Gu
   • C. Huang

   OriginalPaper Pages: 547 - 557

10. Dislocation structure, phase stability, and yield stress behavior of L1₂ intermetallics: Ir₃X (X = Ti, Zr, Hf, V, Nb, Ta)

    • O. Y. Kontsevoi
    • A. J. Freeman
    • K. Y. Khromov

    OriginalPaper Pages: 559 - 566

11. On the development and investigation of quaternary Pt-based superalloys with Ni additions

    • M. Wenderoth
    • U. Glatzel
    • B. Fischer

    OriginalPaper Pages: 567 - 575

12. Microstructural evolution and mechanical properties of Cr-Ru alloys

    • Y. F. Gu
    • Y. Ro
    • H. Harada

    OriginalPaper Pages: 577 - 582

13. Phase field and room-temperature mechanical properties of the C15 laves phase in the Zr-Ta-Cr alloy system

    • T. Ohta
    • Y. Kaneno
    • S. Hanada

    OriginalPaper Pages: 583 - 590

14. Atomic diffusion and phase equilibria at the interfaces of the CoAl/Ir multilayer on Nb₅Si₃-base alloys

    • Yoshisato Kimura
    • Tatsuya Shimizu
    • Sachiyori Shina

    OriginalPaper Pages: 591 - 599

15. Oxidation behavior of multiphase Nb-Mo-Si-B intermetallics

    • Y. Liu
    • M. J. Kramer
    • M. Akinc

    OriginalPaper Pages: 601 - 607

16. Chlorination treatment to improve the oxidation resistance of Nb-Mo-Si-B alloys

    • Vikas Behrani
    • Andrew J. Thom
    • Mufit Akinc

    OriginalPaper Pages: 609 - 615

17. Development of Mo(Si,Al)₂-base oxidation-resistant coating on Nb-base structural materials

    • Tatsuo Tabaru
    • Jin-Hak Kim
    • Shuji Hanada

    OriginalPaper Pages: 617 - 626

18. Oxidation protective silicide coating on Mo-Si-B alloys

    • Kazuhiro Ito
    • Hiroshi Numakura
    • Takashi Murakami

    OriginalPaper Pages: 627 - 636

19. The effects of stress level and grain size on the ambient temperature creep deformation behavior of an alpha Ti-1.6 wt pct V alloy

    • A. K. Aiyangar
    • B. W. Neuberger
    • S. Ankem

    OriginalPaper Pages: 637 - 644

20. The strain rate effect of an open cell aluminum foam

    • Fusheng Han
    • Hefa Cheng
    • Zhibin Li

    OriginalPaper Pages: 645 - 650

21. Influence of solidification conditions on the castability of nickel-base superalloy IN792

    • Yizhou Zhou
    • Andreas Volek
    • Robert F. Singer

    OriginalPaper Pages: 651 - 656

22. Cold spray deposition of nanocrystalline aluminum alloys

    • Leonardo Ajdelsztajn
    • Julie M. Schoenung
    • George E. Kim

    OriginalPaper Pages: 657 - 666

23. Damping behavior of Al-Li-SiC_p composites processed by stir casting technique

    • Ranjit Bauri
    • M. K. Surappa

    OriginalPaper Pages: 667 - 673

24. Optimization of composition and heat treatment of age-hardened Pt-Al-Cr-Ni alloys

    • M. Hüller
    • M. Wenderoth
    • B. Fischer

    OriginalPaper Pages: 681 - 689

25. The influence of alloy composition on precipitates of the Al-Mg-Si system

    • C. D. Marioara
    • S. J. Andersen
    • R. Holmestad

    OriginalPaper Pages: 691 - 702

26. Microstructure, properties, and age hardening behavior of a thermomechanically processed ultralow-carbon cu-bearing high-strength steel

    • A. Ghosh
    • S. Chatterjee
    • S. Das

    OriginalPaper Pages: 703 - 713

27. Mechanical properties and fracture behavior of an ultrafine-grained Al-20 wt pct Si alloy

    • Soon-Jik Hong
    • C. Suryanarayana

    OriginalPaper Pages: 715 - 723

28. Correlation of microstructure and fracture properties of API X70 pipeline steels

    • Byoungchul Hwang
    • Young Min Kim
    • Seong Soo Ahn

    OriginalPaper Pages: 725 - 739

29. Effects of volume fraction of tempered martensite on dynamic deformation properties of a Ti-6Al-4V alloy having a bimodal microstructure

    • Dong-Geun Lee
    • You Hwan Lee
    • Sunghak Lee

    OriginalPaper Pages: 741 - 748

30. Precipitate effects on the mechanical behavior of aluminum copper alloys: Part I. Experiments

    • H. Sehitoglu
    • T. Foglesong
    • H. J. Maier

    OriginalPaper Pages: 749 - 761

31. Precipitate effects on the mechanical behavior of aluminum copper alloys: Part II. Modeling

    • H. Sehitoglu
    • T. Foglesong
    • H. J. Maier

    OriginalPaper Pages: 763 - 770

32. Deformation and fracture behavior of beams composed of aluminum foam core and ceramic Al₂O₃ under monolithic bending

    • J. B. Sha
    • T. H. Yip

    OriginalPaper Pages: 771 - 783

33. Effect of orientation on the tensile and creep properties of coarse-grained INCONEL alloy MA754

    • Terry C. Totemeier
    • Thomas M. Lillo

    OriginalPaper Pages: 785 - 795

34. Phase evolution during laser in-situ carbide coating

    • Anshui Singh
    • Narendra B. Dahotre
    • Narendra B. Dahotre

    OriginalPaper Pages: 797 - 803

35. Migration of crystals during the filling of semi-solid castings

    • H. I. Laukli
    • C. M. Gourlay
    • A. K. Dahle

    OriginalPaper Pages: 805 - 818

36. Iron-rich intermetallic phases and their role in casting defect formation in hypoeutectic Al-Si alloys

    • L. Lu
    • A. K. Dahle

    OriginalPaper Pages: 819 - 835

37. Microstructure and refining performance of an Al-5Ti-0.25C refiner before and after equal-channel angular pressing

    • Zuogui Zhang
    • Yoshimi Watanabe
    • Xiufang Bian

    OriginalPaper Pages: 837 - 844

38. Thermomechanical response of a powder metallurgy Ti-6Al-4V alloy modified with 2.9 pct boron

    • Radhakrishna B. Bhat
    • Seshacharyulu Tamirisakandala
    • Vilupanur A. Ravi

    OriginalPaper Pages: 845 - 857

39. Microstructural evolution during hot working of Ti aluminide alloys: Influence of phase constitution and initial casting texture

    • R. M. Imayev
    • V. M. Imayev
    • F. Appel

    OriginalPaper Pages: 859 - 867

40. Through-thickness texture gradient in an annealed Al-Mg alloy sheet

    • Jiantao Liu
    • S. W. Banovic
    • R. D. Jiggetts

    Communications Pages: 869 - 874