1. Linking first-principles energetics to CALPHAD: An application to thermodynamic modeling of the Al-Ca binary system

   • Koray Ozturk
   • Yu Zhong
   • C. Wolverton

   OriginalPaper Pages: 5 - 13

2. Optimization of the johnson-mehl-avarami equation parameters for α-ferrite to γ-austenite transformation in steel welds using a genetic algorithm

   • A. Kumar
   • S. Mishra
   • J. W. Elmer

   OriginalPaper Pages: 15 - 22

3. Microstructural evolution in two variants of NF709 at 1023 and 1073 K

   • T. Sourmail
   • H. K. D. H. Bhadeshia

   OriginalPaper Pages: 23 - 34

4. Computation of continuous cooling transformation diagrams for the heterogeneous nucleation in Sn-5 mass pct Pb droplets

   • Ping Wu
   • Teiichi Ando

   OriginalPaper Pages: 35 - 41

5. Microstructural evolution of the nickel platinum-aluminide bond coat on electron-beam physical-vapor deposition thermal-barrier coatings during high-temperature service

   • L. C. Zhang
   • A. H. Heuer

   OriginalPaper Pages: 43 - 53

6. Influence of reflow and thermal aging on the shear strength and fracture behavior of Sn-3.5Ag solder/Cu joints

   • X. Deng
   • R. S. Sidhu
   • N. Chawla

   OriginalPaper Pages: 55 - 64

7. Mechanical strength of thermally aged Sn-3.5Ag/Ni-P solder joints

   • Min He
   • Zhong Chen
   • Guojun Qi

   OriginalPaper Pages: 65 - 75

8. Fabrication of lotus-type porous stainless steel by continuous zone melting technique and mechanical property

   • T. Ikeda
   • H. Nakajima
   • T. Aoki

   OriginalPaper Pages: 77 - 86

9. Effects of alloying elements on microstructure, hardness, and fracture toughness of centrifugally cast high-speed steel rolls

   • Chang Kyu Kim
   • Yong Chan Kim
   • Jung Seung Yang

   OriginalPaper Pages: 87 - 97

10. Creep deformation characteristics of tin and tin-based electronic solder alloys

    • M. D. Mathew
    • H. Yang
    • K. L. Murty

    OriginalPaper Pages: 99 - 105

11. Investigation of precipitation behavior in a weld deposit of 11Cr-2W ferritic steel

    • Dejun Li
    • Kenji Shinozaki
    • Kenji Ohishi

    OriginalPaper Pages: 107 - 115

12. The behavior of silicon in the solidification of Zn-55Al-1.6Si coating on steel

    • R. Y. Chen
    • D. J. Willis

    OriginalPaper Pages: 117 - 128

13. An experimental and theoretical investigation of the effect of local colony orientations and misorientation on cavitation during hot working of Ti-6Al-4V

    • Thomas R. Bieler
    • P. D. Nicolaou
    • S. L. Semiatin

    OriginalPaper Pages: 129 - 140

14. Fabrication and characterizations of new glassy Co₇₁Ti₂₄B₅ alloy powders and subsequent hot pressing into a fully dense bulk glass

    • M. Sherif El-Eskandarany
    • Satoru Ishihara
    • A. Inoue

    OriginalPaper Pages: 141 - 147

15. Inhibited coarsening of a spray-formed and extruded hypereutectic aluminum-silicon alloy in the semisolid state

    • S. C. Hogg
    • H. V. Atkinson

    OriginalPaper Pages: 149 - 159

16. Solvent debinding behavior of powder injection molded components prepared from powders with different particle sizes

    • K. S. Hwang
    • G. J. Shu
    • H. J. Lee

    OriginalPaper Pages: 161 - 167

17. Molecular dynamic study for nanopatterning using atomic force microscopy

    • Young-Suk Kim
    • Chan-Il Kim
    • Kyung-Hoan Na

    OriginalPaper Pages: 169 - 176

18. Modeling of oxide dispersions in reactively processed al

    • Yaojun Lin
    • Yizhang Zhou
    • Enrique J. Lavernia

    OriginalPaper Pages: 177 - 186

19. The use of water cooling during the continuous casting of steel and aluminum alloys

    • J. Sengupta
    • B. G. Thomas
    • M. A. Wells

    OriginalPaper Pages: 187 - 204

20. The role of orientation pinning in statically recrystallized oxygen-free high-conductivity copper wire

    • D. R. Waryoba
    • P. N. Kalu
    • A. D. Rollett

    OriginalPaper Pages: 205 - 215

21. Tensile behavior of carbon nano-fiber-reinforced Cu composite using the liquid infiltration process

    • Younghwan Jang
    • Sangshik Kim
    • Sangkwan Lee

    OriginalPaper Pages: 217 - 223

22. Thermodynamic effect of alloying addition on in-situ reinforced TiB₂/Al composites

    • Tongxiang Fan
    • Guang Yang
    • Di Zhang

    OriginalPaper Pages: 225 - 233

23. Surface oxidation behavior of Mg-Y-Ce alloys at high temperature

    • J. F. Fan
    • S. L. Cheng
    • Y. H. Zhou

    OriginalPaper Pages: 235 - 239

24. A parallel macro/micro elastoplasticity model for aluminum deformation and comparison with experiments

    • R. Prasannavenkatesan
    • B. Q. Li
    • H. Weiland

    OriginalPaper Pages: 241 - 256

25. Annealing atmosphere, magnetic induction, and the number of {110} grains in inhibitor-free 3 pct Si-Fe alloys

    • N. H. Heo

    Communications Pages: 257 - 259

26. Effect of the size distribution of alpha particles on microstructure evolution during heat treatment of an alpha/beta titanium alloy

    • J. D. Miller
    • S. L. Semiatin

    Communications Pages: 259 - 262

27. Electronic structure and ferromagnetic effect in Ni₂MnGa alloy

    • J. F. Wan
    • S. P. Chen
    • X. L. Lei

    Communications Pages: 262 - 267

28. Measurements of the bulk velocity during solidification of metallic alloys

    • S. Eckert
    • B. Willers
    • G. Gerbeth

    Communications Pages: 267 - 270