Application Study of Active Noise Control Technology for Rail Transit Vehicles

  • Xiaobo Liu
  • Jian Xu
  • Zhongcheng Jiang
  • Xianfeng Wang
Conference paper
Part of the Lecture Notes in Electrical Engineering book series (LNEE, volume 482)

Abstract

Active noise control (ANC) technology is a powerful complement for the traditional noise reduction technology. Analysed the current situation of noise control for rail vehicles; according to the application range of ANC technology, analysed the application strategy of ANC technology for rail transit vehicles; measured and analysed noise characteristics of an electric locomotive cab under different operating speeds and railway conditions, and proposed the ANC system scheme based on the whole cab space. Through the preliminary simulation calculation, the total sound pressure level in cab can be reduced by 4 dB(A). It provides a new idea for the noise control and comfort design of rail transit vehicles.

Keywords

Rail transit vehicles ANC Electric locomotive cab 

References

  1. 1.
    Johansson S (2000) Active control of propeller-induced noise in aircraft: algorithms & methods. Blekinge Institute of TechnologyGoogle Scholar
  2. 2.
    Couche J (1999) Active control of automobile cabin noise with conventional and advanced speakers. Virginia Polytechnic Institute and State UniversityGoogle Scholar
  3. 3.
    Kang WP, Moon HR, Lim J (2014) Analysis on technical trends of active noise cancellation for reducing road traffic noise. Journal of Emerging Trends in Computing and Information Sciences 5(4):286–291Google Scholar
  4. 4.
    Landaluze J, Portilla I, Pagalday JM et al (2003) Application of active noise control to an elevator cabin. Control Engineering Practice 11(12):1423–1431CrossRefGoogle Scholar
  5. 5.
    Zhang L, Pan J, Qiu X (2013) Integrated passive and active control of engine noise. In: Proceedings of the 20th international congress on sound & vibration, Bangkok, ThailandGoogle Scholar
  6. 6.
    Lin Z, Zhang L, Qiu X et al (2014) An integrated passive and active control system for reducing haul truck noise. In: Inter Noise 2014. Australian Acoustical Society 2014:1–8Google Scholar
  7. 7.
    Gelin LJ (1997) Active noise control: a tutorial for HVAC designers. ASHRAE J 39(8):43Google Scholar
  8. 8.
    Prezelj J, Čudina M (2011) A secondary source configuration for control of a ventilation fan noise in ducts. Strojniškivestnik-J Mech Eng 57(6):468–476CrossRefGoogle Scholar
  9. 9.
    Rutger Kastby C (2013) Active control for adaptive sound zones in passenger train compartments. Stockholm, SwedenGoogle Scholar
  10. 10.
    Botto MA, Sousa JMC, da Costa JMGS (2005) Intelligent active noise control applied to a laboratory railway coach model. Control Eng Pract 13(4):473–484CrossRefGoogle Scholar
  11. 11.
    Loizeau T, Poisson F (2006) Acoustic active control inside a locomotive cabin. In: 7th World congress on railway research, Montreal, CanadaGoogle Scholar
  12. 12.
    Johnson TM, Hanson CE, Ross JC et al (2009) Development of passive and active noise control for next generation locomotive cabs. In: Inter noiseGoogle Scholar
  13. 13.
    Liu XB, Liu J (2016) Study on acoustic management process and key technology for railroad vehicle. Noise Vib Control 36(6):82–86 (in Chinese)Google Scholar
  14. 14.
    Garcia-Bonito J, Elliott SJ, Boucher CC (1997) Generation of zones of quiet using a virtual microphone arrangement. J Acoust Soc Am 101(6):3498–3516CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2018

Authors and Affiliations

  • Xiaobo Liu
    • 1
    • 2
  • Jian Xu
    • 3
  • Zhongcheng Jiang
    • 1
    • 2
  • Xianfeng Wang
    • 1
    • 2
  1. 1.The State Key Laboratory of Heavy Duty AC Drive Electric Locomotive Systems IntegrationZhuzhouChina
  2. 2.CRRC Zhuzhou Locomotive Co. LtdZhuzhouChina
  3. 3.Northwestern Polytechnical UniversityXi’anChina

Personalised recommendations