Zusammenfassung
Die wachsenden industriellen Anwendungen von Thermoplasten als Konstruktionswerkstoffe führen zu zunehmenden bruchmechanischen Untersuchungen an Kunststoffen. Zur Beschreibung des bruchmechanischen Verhaltens von zähen Thermoplasten wurde das Rißwiderstandskonzept erfolgreich eingesetzt [1].
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Literaturverzeichnis
Grellmann W., Seidler S. (1992): J-Integral Analysis of Fibre-Reinforced Injection-Moulded Thermoplastics. J. Polymer Engng. 11, 1–2: 71–101
Wert M.J., Saxena A., Ernst H.A. (1990): Applicability of Modified J as a Fracture Parameter for Polycarbonate. J. Testing and Evaluation 18: 1–13
Atkins A.G., Lee C.S., Caddell R.M. (1975): Time-Temperature Dependent Fracture Toughness of PMMA. J. of Materials Science 10: 1381–1393
Lu M.L., Chang F.C. (1995): Fracture Toughness of PC/PBT Blend Based on J-Integral Methods. J. Applied Polymer Science 56: 1065–1075
Strebel J.J., Moet A. (1993): Determining Fracture Toughness of Polyethylene from Fatigue. J. of Materials Science 28: 2981–2988
Moskala E.J. (1992): Fracture Behavior of Rubber-Toughened Polymer Blends. J. of Materials Science 27: 4883–4889
Joyce J.A., Ernst H.A., Paris P.C. (1980): Direct Evaluation of J-Resistance Curves from Load Displacement Records. In: Fracture Mechanics, Twelfth Conf., ASTM STP 700: 222–236
Landes J.D., Zhou Z., Lee K., Herrera R. (1991): Normalization Method for Developing J-R-Curves with the LMN Function. J. Testing and Evaluation 19: 305–311
Ernst H.A., Paris P.C., Landes J.D. (1981): Estimation on J-Integral and Tearing Modulus T from a Single Specimen Test Record. In: Roberts R. (Ed.) ASTM STP 743: 476–502
Sharobeam M.H., Landes J.D. (1993): The Load Separation and η pl Development in Pre-cracked Specimen Test Records. Intern. J. Fracture 59: 213–226
Landes J.D., Zhou Z. (1993): Application of Load Separation and Normalizations for Poly-carbonate Materials. Intern. J. Fracture 63: 383–393
Herrera R., Landes J.D. (1988): A Direct J-R Curve Analysis of Fracture Toughness Tests. J. Testing and Evaluation 16: 427–449
Standard Draft ESIS TC4 (1995): A Testing Protocol for Conducting J-Crack Growth Resistance Curve Tests on Plastics.
Seidler S., Grellmann W. (1994): Crack Initiation Behavior of Polymers. In: Proceedings Deformation, Yield and Fracture of Polymers, Cambridge, England, 11.-14.4.: 108/1–108/4
Grellmann W. (1996): Morphologie-Zähigkeits-Korrelationen polymerer Mehrphasenwerkstoffe — Aussagefähigkeit und strukturelle Empfindlichkeit bruchmechanischer Werkstoffkenngrößen. In: Tagungsband Gefüge und Bruch, Leoben, Österreich, 20.-22.3.:1–8
Che M., Grellmann W., Seidler S. (1997): Crack Resistance Behavior of Polyvinylchloride. J. Applied Polymer Science 64: 1079–1090
Grellmann W., Che M. (1997): Assessment of Temperature-Dependent Fracture Behavior with Different Fracture Mechanics Concepts on Examples of Unoriented and Cold-Rolled Polypropylene. J. Applied Polymer Sience 66: 1237–1249
Grellmann W., Seidler S., Jung K. (1994): Stand und Entwicklungstendenzen bei der Anwendung des Rißwiderstandskonzeptes in der Kunststoffprüfung. In: Tagungsband Werkstoffprüfung 1994, Bad Nauheim, 1.-2.12.: 273–281
Seidler S., Grellmann W. (1994): Untersuchung von Rißspitzendeformationsprozessen in teilkristallinen und amorphen Kunststoffen bei dynamischer Beanspruchung. In: Tagungsband Polymerwerkstoffe ‘84, Merseburg, 27.-29.9.: 244–253
Reese E.D. (1996): Zur Anwendung des R-Kurven-Verfahrens der elastisch-plastischen Bruchmechanik auf Polymere. Herbert Utz Verlag Wissenschaft, München
Fasce L., Bernal C., Carcagno G., Frontini P., Sautereau H. (1997): Evaluation of Dynamic Fracture Toughness in Ductile Polymers by the Normalization Method. In: Tagungsband Deformation, Yield and Fracture of Polymers, Cambridge, 7.-10.3.: 250–253
Bernal C., Montemartini P., Frontini P. (1996): The Use of Load Separation Criterion and Normalization Method in Ductile Fracture Characterization of Thermoplastic Polymers. J. Polymer Science, Part B, Polymer Physics 34: 1869–1880
Bernal C., Cassanelli A., Frontini P. (1995): A Simple Method for J-R-Curve Determination in ABS Polymers. Polymer Testing 14: 85–96
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1998 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Che, M., Seidler, S., Grellmann, W. (1998). Anwendung der Normalisierungsmethode zur Ermittlung von Rißwiderstandskurven an amorphen PVC-Werkstoffen. In: Grellmann, W., Seidler, S. (eds) Deformation und Bruchverhalten von Kunststoffen. VDI-Buch. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-58766-5_9
Download citation
DOI: https://doi.org/10.1007/978-3-642-58766-5_9
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-63718-6
Online ISBN: 978-3-642-58766-5
eBook Packages: Springer Book Archive