Abstract
Materials play an important role in manufactured goods. Materials must possess both acceptable properties for their intended applications and a suitable ability to be manufactured. These criteria hold true for micromanufacturing, in which parts have overall dimensions of less than 1 mm. This chapter begins by reviewing materials usage in Asian and European research in micromanufacturing, categorized by manufacturing process. Following that, specific treatment is given to materials factors that are unique to micromanufacturing.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Bardes, B. P. ed. Metals Handbook: Ninth Edition. 1979. Volume 2, 285 in Properties and Selection: Nonferrous Alloys and Pure Metals, (Bruce P. Bardes, Ed.), American Society of Metals, 1979.
Chang, H., C. J. Altstetter, R. S. Averbach. 1995. Nanophase Metals—Processing and Properties. In Advanced Materials and Processing, vol. 3, K.S. Shin, et al., eds, Kyongju, Korea: Korean Institute of Metals and Materials, 2107.
Chokshi, A. H., A. Rosen, J. Karch, H. Gleiter. 1989. On the Validity of the Hall-Petch Relationship in Nanocrystalline Materials. Scripta Metall 23, 1679–1684.
Croat, J. J. 1982. Permanent Magnet Properties of Rapidly Quenched Rare Earth-Iron Alloys. IEEE Trans Magn 18, 1442–1447.
Eastman, J. A., L. J. Thompson, B. J. Kestel. 1993. Narrowing of the Palladium-Hydrogen Miscibility Gap in Nanocrystalline Palladium. Phys Rev B 48, 84–92.
Ganqvist, C. G., G. J. Milanowski, R.A. Buhrman. 1975. A15-Type Structure of Chromium Films and Particles. Physics Letters 54A, 245–246.
Herzer, G. 1991. Materials Science and Engineering A 133, 1–5.
Koon, N. C. and B. N. Das. 1981. Magnetic-Properties of Amorphous and Crystallized (Fe0.82B0.18)0.9Tb0.05LaO0.05. Applied Physics Letters 39, 840–842.
Kimoto, K. and I. Nishida. 1967. An Electron Microscope and Electron Diffraction Study of Fine Smoke Particles Prepared by Evaporation in Argon Gas at Low Pressures II. Applied Physics 6, 1047–1059.
Malow, T. R. and C. C. Koch. 1996. Grain Growth of Nanocrystalline Materials—A Review, 33–46. In Synthesis and Processing of Nanocrystalline Powder, D. L. Bourell, ed., Warrendale PA: TMS.
Mütschele, T., R. Kirchheim. 1987. Hydrogen as a Probe for the Average Thickness of a Grain Boundary. Scripta Metallurgica 21, 1101–1104.
Nieh, T. G. and J. Wadsworth. 1989. Characterization of Superplastic Yttria-Stabilized Tetragonal Zirconia by a Hot Indentation technique. Scripta Metallurgica 23, 1261–1264.
Nye, J.F. 1985. Physical Properties of Crystals, Oxford: Clarendon Press.
Padmanabhan, K. A. and H. Hahn. 1996. Microstructures, Mechanical Properties and Possible Applications of Nanostructured Materials, 21–32. In Synthesis and Processing of Nanocrystalline Powder, D.L. Bourell, ed., Warrendale, PA: TMS.
Saito, Y., K. Mihama, R. Uyeda. 1980. Formation of Ultrafine Metal Particles by Gas-Evaporation. 6. BCC Metals Fe, V, Nb, Ta, Cr, Mo and W. J Applied Physics 19, 1603–1610.
Schumacher, S., R. Birringer, R. Strauss, H. Gleiter. 1989. Diffusion of Silver in Nanocrystalline Copper Between 303 and 373K. Acta Metallurgica 37, 2485–2488.
Skandan, G., H. Hahn, M. Roddy, W. Cannon. 1994. Ultrafine-Grained Dense Monoclinic and Tetragonal Zirconia. J American Ceramics Society 77, 1706–1710.
Soma, T., M. Matsui, I. Oda. 1986. Tensile strength of a sintered silicon nitride, 361–374. In Non-Oxide Technical and Engineering Ceramics, S. Hampshire, ed., New York: Elsevier.
Stuhr, U. H. Wipf, T. J. Udovic, J. Weissmüller, H. Gleiter. 1995. Inelastic Neutron Scattering Study of Hydrogen in Nanocrystalline Pd. Nano Structured Materials 6, 555–558.
Tsai, M.-C. and Y.-A. Chen. 2004. Size effects in micro-metal forming. In MIRDC Government Annual Report, 18–27 (2004) [in Chinese].
Tsai, M.-C., Y.-A. Chen, C.-F. Wu, F.-K. Chen. 2004. Size effect in micro-metal forming of copper and brass. Forging, 13:2, 41–46 [in Chinese with English abstract].
Tsai, M.-C. 2004. Cu15Zn microstructure effects on micro-metal forming. MIRDC Government Annual Report [in Chinese].
Wakai, F. and H. Kato. 1988. Adv Ceramic Materials 3, 71.
Weissmüller, J. 1996. Nanocrystalline Materials—An Overview, 3–20. In Synthesis and Processing of Nanocrystalline Powder, D.L. Bourell, ed., Warrendale PA: TMS.
Weissmüller, J., J. Löffler, M. Kleber. 1995. Nanostructured Materials 6, 105–114.
Yoshizawa, Y., S. Oguma, K. Yamauchi. 1988. New Fe-Based Soft Magnetic-Alloys Composed of Ultrafine Grain-Structure. J Applied Physics 64, 6044–6046.
Rights and permissions
Copyright information
© 2007 Springer
About this chapter
Cite this chapter
Bourell, D., Rajurkar, K. (2007). Materials. In: Micromanufacturing. Springer, Dordrecht. https://doi.org/10.1007/978-1-4020-5949-0_3
Download citation
DOI: https://doi.org/10.1007/978-1-4020-5949-0_3
Publisher Name: Springer, Dordrecht
Print ISBN: 978-1-4020-5948-3
Online ISBN: 978-1-4020-5949-0
eBook Packages: EngineeringEngineering (R0)