Effects of freezing storage on the DNA extraction and microbial evaluation from anaerobic digested sludges
- 2.2k Downloads
The anaerobic digestion is one of the most spread renewable energy technology. The input biomasses included various environmental problematic wastes such as sludge coming from wastewater treatment plant (WWTP) and organic fraction of municipal solid waste (OFMSW). As biomolecular procedures have become important tools for the microbial characterisation of anaerobic samples coming from the reactors, it is crucial sampling and extracting properly DNA in order to employ such types of techniques. The current study is aimed to evaluate how freezing temperature and length of storage at −20 °C influence both the extracted DNA yield and microbial community quantifications from digested sludge samples collected at full-scale plants.
From WWTP sludge samples, we observed a reduction of DNA concentration comparing fresh and stored samples for 10 days at −20 °C (ANOVA test p < 0.0001), with an estimated DNA loss of approximately 65 % for such types of samples, however the methanogen communities can be assessed respecting the fresh conditions. From OFMSW sludge samples, we observed a reduction in extracted DNA (−90 %), after 120 frozen days, while microbial communities are determined respecting the fresh conditions within 2 months of frozen storage.
The remarkable effect of frozen storage on sludge samples suggests as the better procedure to perform the DNA extraction from fresh sample. On the other hand it is not generally possible, so approximately 2 months of storage at −20 °C appears to be suitable time at which DNA concentrations remain sufficient to perform coherent microbial characterization through quantitative qRT-PCR.
KeywordsSludge Wastewater treatment Biotechnology DNA extraction PCR (polymerase chain reaction)
wastewater treatment plant
organic fraction municipal solid waste
real time quantitative polymerase chain reaction
methyl-coenzyme M reductase α-subunit gene
Solid organic waste removal has become an ecological problem that is increasingly being recognized as the result of an increase in public health concerns and environmental awareness. The organic fraction of solid waste has been acknowledged as a valuable resource that can be converted into useful products through microbial transformations : in this frame the anaerobic treatment seems to be one of the most promising approaches [2, 3, 4, 5]. Understanding microbial population development in landfills over a length of time is challenging due to the complexity of waste materials deposited and the spatial heterogeneity of landfills. Considerable efforts have been directed toward the development of rapid and dependable methods for the detection and enumeration of microbial populations, such as methanogens , sulphate-reducing bacteria  and hydrolytic microorganisms  in different types of complex environmental matrices, such as soil, sediment, sludge and stool [9, 10, 11]. The molecular techniques for the characterisation and quantification of single microbial communities—with quantitatively and qualitatively sufficient extracted DNA—are now quite widespread for the optimization of the biogas quantity and quality. The complexity of matrices such as those described above, together with storage time, can interfere with some technical aspects, making these types of samples difficult to treat. Storage conditions are of great importance when they are related to the quantification of microbial communities characterizing the anaerobic sludges especially at full-scale digesters where there isn’t a own biomolecular laboratory. Studies on microbial characterization of digested sludges are recently growing, since it is considered as an important bioindicator of the state of bioreactor functioning in which the anaerobic digestion process is realized [4, 6, 12, 13, 14]. Since the effects of storage conditions on microbial community are likely expected, it should be relevant to investigate the freezing effects on microbial population. Various results concerning the effects of handling and storage conditions on DNA and on the microbial characterization from different environmental matrices exist [10, 11, 15, 16, 17], but information regarding the storage effects of anaerobic digested sludge samples are still lacking. Various studies revealed that the phylogenetic structure of the microbiota did not significantly differ when human or environmental samples were stored at different temperatures [15, 16, 17]. A lower stability of DNA was observed only for storage at room temperatures after 24 h .
On the other hand, it is important to recognize that studies on the phylogenetic structure of the microbial populations require qualitative evaluations when referring to the relative composition of the microbiota, whereas quantitative measurements using a standard curve represent a different tool that is able to provide quantitative information . Therefore, the current study aimed to define the influence of technical conditions—including freezing and storage time—on extracted DNA yield and on microbial targets such as total bacteria and methanogens. The study was carried out on full-scale anaerobic digesters of wastes including digested sludge samples coming from a wastewater treatment plant (WWTP) and from the organic fraction of municipal solid waste (OFMSW).
Results and discussion
Comparison of DNA concentrations in anaerobic sludges from WWTP and OFMSW samples in the two experimental line
DNA µg/g of weighted sample ± SD
246.1 ± 107.7
89.6 ± 48.2
182.0 ± 65.2
75.5 ± 35.4
103.2 ± 44.6
28.3 ± 12.4
143.9 ± 64.9
43.5 ± 21.1
168.8 ± 89.0
59.2 ± 39.7
Considering the two E and F samples, their initial DNA concentrations reported on the first monitoring day were 21.6 and 32.4 µg/g dry weight sample, respectively. The noticeable reduction of the total amount of DNA during frozen storage, as observed throughout nearly 4 months of repeated extractions, is evident for both of samples (Table 1). The tendency does not display a regular decrease, however the mean value of the quantified DNA concentration is inversely proportional to the length of the frozen storage period (Spearman’s rho = −0.886, p = 0.019). Overall, the total lost DNA quantity is 81 and 93 % for E and F samples, respectively, when comparing the mean of the first and the last time point DNA concentrations (T test, p = 0.049). Moreover, the linear regression between the DNA concentration, as evaluated for the two samples, and the frozen storage time displays a decrease of approximately 6.6 % for every 10 days of storage.
Since the advent of DNA-based methods to characterise complex bacterial communities in biological and/or environmental samples, often freezing samples is required, in order to perform the analysis on a larger number of samples collected at different times. This is crucial especially switching from lab scale to full scale digesters. The use of specific biomolecular techniques has been recently expanding in the field of microbial characterisation of environmental samples in addition to the use of the classical and time-consuming culture methods. Even if these techniques are still very reliable with a low DNA concentration, it is important to take into account that also the technical aspects such as storage conditions could have a role in obtaining higher quality-genomic samples.
Concerning our study, variations of DNA concentrations among the four types of WWTP fresh samples are expected, since different microbial communities are temporally selected during the anaerobic digestion process. In particular the anaerobic conditions establishing within the bioreactor induce the growth of the anaerobic microbial communities, leading to increased DNA concentrations and to increased presence of growing methanogens in the effluent samples (B and D samples). While this tendency is well evident for the mixed treatment, the secondary system shows an inverse tendency likely due to inhibition of aerobic community (typically more abundant in secondary activated sludges than mixed sludges) during the anaerobic digestion, thus masking the contribution of growing anaerobic communities (Table 1). In fact when considering only the methanogens, an increased concentration of anaerobic communities is observed in effluent samples for both of the two treatment systems (Fig. 1). Even if—comparing fresh and frozen samples—all the fluctuations in terms of DNA concentrations are kept, the significant reduction found in the frozen samples pays serious attention to the microbial quantification. As observed for OFMSW samples, the methanogens quantification remains quite constant for DNA concentrations ranging from 4.6 to 35.9 µg g−1 of weighted sample: only for DNA concentration values below this range, also the methanogens quantification has a decrement but not statistically significant, probably attributable to the low numerosity of data (Fig. 3) suggesting the DNA extraction from such samples after short freezing time. A 2 months period is desirable. Storage conditions are considered to be a critical component of DNA-based microbial community analysis methods. In regards to our study, since fresh and frozen samples were technically processed in a same way (same DNA extraction kit, same operative DNA extraction conditions), the observed differences in the DNA concentrations comparing fresh and frozen samples could be mainly likely due to the freezing storage, considering also the intrinsic variability of a complex matrix such as anaerobic sludge. Results highlight neither the freezing temperatures nor the length of frozen storage (ranging from 10 days to approximately 2 months) appeared to adequately preserve environmental samples from a genomic DNA yield point of view. It should be also important to distinguish between “freezing step” and “thawing step” among the general expression “freezing storage”. Actually we are not really able to attribute the observed differences in DNA yields to the first or to the second step. However the Table 1—concerning DNA quantity in OFMSW samples—shows how if the problem was the thawing, a decrease in DNA yield over the time should not be observed, and the last aliquot should have a DNA content comparable to the first aliquot, since the DNA degradation (by DNAse or other) should occur with the same entity on the first aliquot as well as on the last one. For this reason the degradation seems to be likely attributable to the length of time during which the sample is kept at −20 °C, and not to the thawing phase. Freezing storage is only one among the many troubles related to the treatment of such complex type of samples. Actually literature on anaerobic sludge samples do not contemplate, for example, the use of any substances to preserve DNA during the thawing. During this phase microbial cells could be broken and DNA as well as DNAases that destroy DNA could be released. However, similar studies on this kind of sample indicate any substance or reagent to preserve the anaerobic sludge samples from the degradation of nucleic acids [4, 6, 12, 14, 19]. One of the major impediments in quantifying microorganisms from environmental samples is, for example, the presence of several potentially PCR-inhibiting factors, including humic substances, metals and ions that in the present study were adequately controlled by ten-fold diluting of samples [4, 6, 20]. Also there are other several wastewater treatment process parameters can influence the presence and the viability of microbial communities in these samples: retention time, type of digestion (batch or continuous), reactor configuration, pH, concentration and composition of (volatile) fatty acids, available nutrients, structure and composition of bacterial communities, microbial competition and chemical interactions, including ammonia toxicity [19, 21, 22], could interfere both with the DNA quantification and the molecular characterisation of microbial communities, making this type of sample much more variable from a management point of view than other environmental and biological samples originated in more stable conditions. In line with freezing storage timing tested on OFMSW samples, the methanogens quantification in WWTP samples is not so affected when performed on ten-days frozen samples, comparing it with the quantification on fresh samples (Fig. 1).
We quantified the methanogen community as an example of a typical microbial community occurring in this type of sample, in which the anaerobic digestion process is intended for biogas production. Theoretically, no differences are expected concerning the structure of the microbial community, as the freezing storage—DNA reduction occurs proportionally for the total DNA. Temperature plays a primary role in the stability and selection of both the identity of individual species and the overall bacterial diversity supported by a wastewater treatment reactor [23, 24, 25]. Freezing storage of this kind of sample could be a further variable in the evaluation of microbial communities.
Our findings indicate that the enumeration of abundant microbial populations from complex samples—such as methanogens in anaerobic sludges—was not significantly affected when processed after short periods of storage at −20 °C (about 10 days), comparing with fresh-processed samples. Also longer time storage at −20 °C does not significantly affect the DNA concentration nor the principal microbial communities colonizing anaerobic sludge samples. Although the freezing storage represents a consolidated lab practice to preserve samples, our purpose was to consider how this technical procedure potentially could lead to underestimated results; this is relevant when the quantification and characterisation of the microorganism community in reactors—together with chemical and physical parameters—is used for the control and management of the anaerobic process.
Schematic experimental design of the two conducted experiments in which two clearly distinct activities are described
Schedule of DNA extraction
Comparing the extracted DNA concentration in fresh and frozen samples
4 types of samples named A, B, C and D
Sludge from anaerobic digestion of WWTP
For each sample: DNA extraction from fresh sample and DNA extraction from 10-days frozen sample
Verifying the preservation of the extracted DNA concentration in frozen samples
2 samples, named E and F
Sludge from anaerobic digestion of OFMSW
Repeated DNA extractions from aliquots of the same sample after different storage periods
For the second experimental line, sludge samples coming from the anaerobic digestion of OFMSW treatment plant in the province of Alessandria (Italy) were used to test the DNA preservation status of saved samples throughout a frozen storage period ranging from 20 to 120 days. Sludge samples were harvested from two different sections of the same sole biodigester under investigation: considering a reactor diameter of approximately 25 m, the E sample was harvested from a more external side (2 m section from the wall towards the centre), and the F sample was harvested from the central section of the reactor. The sludge samples were collected in the same manner of the WWTP samples; after an accurate mixing, undiluted samples were divided into 10 aliquots and then stored at −20 °C. Arranging a number of separate aliquots for each sludge sample was also useful to correctly perform the following biological evaluations: in this way thawing and DNA extraction occurred one sole time for each aliquot, avoiding repeated thawing and re-freezing steps. With a regular periodicity (on average every 25 days, for a entire period of approximately 4 months), each of these stored aliquots was thawed for DNA extraction and quantification until the DNA concentration reached the threshold of 1 µg ml−1. This threshold is the minimum DNA concentration needed to provide sufficient DNA template for each qPCR reaction  and to detect single microbiological groups, such as methanogens, for which at least 0.1 ng of DNA for PCR is necessary .
Extraction, quantity and quality of DNA
50 ml of sludge sample from each type of biodigester were centrifuged at 2500g for 10 min, to collect all particulate matter eventually in the supernatant (including cells and bacteria) into the pellet at the bottom, and the supernatant was then discarded. Every DNA extraction was performed with a commercial kit already employed for sludge samples [7, 15] (PowerSoil DNA Isolation Kit, MO-BIO Laboratories Inc., Carlsbad), starting from 0.25 g of semi-dry pellet, in accordance to the manufacturer’s instructions. No treatment to protect DNA against DNAse was applied neither for fresh nor for frozen-thawed samples: the same DNA extraction procedural conditions for all samples coming from both of the two experimental lines were carried out. The fluorimetric quantification of each DNA sample was performed using a Qubit™ Fluorometer and Qubit™ dsDNA HS Assay by Invitrogen (distributed by Life Technology Ltd., Paisley, UK) on diluted DNA aliquots (range of standard curve: 0–10 µg ml−1). The DNA samples were stored at −20 °C until the PCR analysis was performed. The A260/280 ratio was calculated by spectrophotometric method (BioTek Instruments plate Reader—PowerWave HT, accessorized with Gen5 software) for the quality of extracted DNA. For the WWTP freshly-processed samples the average ratio was 1.95, conversely the average ratio is less favorable for frozen WWTP samples with a value of 1.8.
RT-qPCR for microbial target quantification
Real-Time Quantitative PCR (RT-qPCR) was performed using a Chromo4 thermal-cycler (Bio-Rad, Hercules, CA) and Opticon Monitor 3 Software. The amplification target for total bacteria quantification was the ribosomal RNA 16S subunit (16SrDNA) ; for methanogen quantification was the functional gene methyl-coenzyme M reductase α-subunit (mcrA) . For methanogens 2 µl of ten-fold diluted sample (about 8 ng of DNA per single PCR reaction) was added to the reaction mixture consisting of 10 µl of SsoFast EvaGreen® Supermix (Bio-Rad, Hercules, CA), 0.25 µmol l−1 of forward (mlas-F: 5′-GGTGGTGTMGGDTTCACMCARTA-3′) and reverse (mcrA-R: 5′-CGTTCATBGCGTAGTTVGGRTAGT-3′) primers  (Thermo Fisher Scientific, Waltham, MA, USA), and 7 µl of ultrapure water in a 20 µl volume reaction. Primers targeting the specific portion of DNA coding for the functional gene mcrA were used as previously described by Steinberg and Regan  (the accession numbers of the used sequences are reported by Steinberg and Regan in their study). Total methanogens were quantified using a standard curve in which the mcrA gene from Methanosarcina acetivorans was placed into the pCR21 vector . The mcrA plasmid was first amplified through the transformation of Top 10 E. Coli cells, and then, the plasmid was extracted using a commercial kit (NucleoSpin Plasmid, Macherey–Nagel, Düren, Germany) as previously described . Serial ten-fold dilutions of the plasmid DNA containing mcrA gene was applied, and a six-point standard curve ranging from 2.5 × 107 to 2.5 × 102 copies of mcrA was applied. For total bacteria 2 µl of ten-fold diluted samples was added to reaction mixture consisting of 8 µl IQ™ Multiplex PowerMix (Bio-Rad, Hercules, CA, USA), 0.2 µl molecular probe (10 µM concentration), 0.5 µl each of the forward and reverse primers (10 µM final concentration, Thermo Fisher Scientific, Waltham, MA, USA) and 8.8 µl of ultrapure water in a 20 µl final reaction volume. To obtain an absolute quantification of all targets in sludge samples, the genomic DNA of each microorganism, provided by the American Type Culture Collection, LGC (ATCC, Manassas, VA, USA), was used as standards. Serial ten-fold dilutions of each ATCC standard were assayed, and quantifications are expressed as gene copy number µl−1 of extracted DNA, assuming four 16SrDNA gene copies per bacterium . Standards and samples were tested in triplicate and DNA quality and integrity were evaluated by gel electrophoresis before the chain reaction. Reaction condition were 95 °C for 3 min (1×), then 95 °C for 3 s, 55 °C for 45 s, 72 °C for 30 s and 83 °C for 5 s (40×). A final melt curve analysis was performed to verifying the specificity of PCR products. The program was as follows: denaturation of 1 min at 95 °C, cooling of 1 min at 65 °C and then 95 °C, at a rate of 0.5 °C per cycle. For total bacteria, the reaction conditions were 95 °C for 3 min (1×), then 95 °C for 30 s, 55 °C for 1 min (39×). The other amplifications were performed for 30 s, 55 °C for 1 min (40×); a melt curve was not performed. The results were expressed as the mcrA and 16SrDNA gene copies number per ng of DNA. The triplicate averages were accepted only if the coefficient of variation was below 20 %. All the PCRs were conducted taking into account the reaction efficiency (ŋ efficiency values >75 %).
The Spearman correlation coefficient was used to assess the relationship between the variables. Considered variables were the DNA yield expressed as ug g−1 of weighted sample, and microbial targets expressed as gene copies number per ng of DNA. A T test of independent variables and an ANOVA test were used to compare two or more means, respectively. A paired T-test was used to compare singular values from two sets of data. Log-transformation was needed for the microbial evaluation data. All the statistical evaluations were considered significant at p < 0.05. Statistical analyses were performed with the SPSS Package version 19.0 for Windows.
VR carried out the experimental work, analyzed the data and wrote the manuscript; DT analyzed the data, scheduled the sampling activities and supervised the lab activity; EL provided SMAT samples together with chemical analysis; finally GG revised the overall work as Head of the lab. All authors read and approved the final manuscript.
The authors wish to thank the European Community for funding. This work was produced as part of the project financed in the context of the Fuel Cells and Hydrogen Joint Undertaking (FCH-JU) Seventh Framework Programme titled “SOFC CCHP with poly-fuel: operation and maintenance” (Project acronym: SOFCOM, Grant agreement number: 278798). We wish to give special acknowledgment to all of the collaborators employed in the anaerobic digestion plants and, obviously, the owners of the companies.
Compliance with ethical guidelines
Competing interests The authors declare that they have no competing interest.
- 4.Merlino G, Rizzi A, Villa F, Sorlini C, Brambilla M, Navarotto P, Bertazzoni B, Zagni M, Araldi F, Daffonchio D. Shifts of microbial community structure during anaerobic digestion of agro-industrial energetic crops and food industry byproducts. J Chem Technol Biotechnol. 2012;87:1302–11.CrossRefGoogle Scholar
- 18.Gadkar D, Filion M. Studying microbial gene expression in complex environmental matrices using quantitative Real-Time Polymerase Chain Reaction. In: Filion M, editor. Quant Real-Time PCR Appl Microbiol. Norfolk: Caister Academic Press; 2012. p. 163–80.Google Scholar
- 19.Farrah SR, Bitton G. Bacterial survival and association with sludge flocs during aerobic and anaerobic digestion of wastewater sludge under laboratory conditions. Appl Env Microbiol. 1983;45:174–81.Google Scholar
Open AccessThis article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.