Decision support for risk prioritisation of environmental health hazards in a UK city
- 1.8k Downloads
There is increasing appreciation of the proportion of the health burden that is attributed to modifiable population exposure to environmental health hazards. To manage this avoidable burden in the United Kingdom (UK), government policies and interventions are implemented. In practice, this procedure is interdisciplinary in action and multi-dimensional in context. Here, we demonstrate how Multi Criteria Decision Analysis (MCDA) can be used as a decision support tool to facilitate priority setting for environmental public health interventions within local authorities. We combine modelling and expert elicitation to gather evidence on the impacts and ranking of interventions.
To present the methodology, we consider a hypothetical scenario in a UK city. We use MCDA to evaluate and compare the impact of interventions to reduce the health burden associated with four environmental health hazards and rank them in terms of their overall performance across several criteria. For illustrative purposes, we focus on heavy goods vehicle controls to reduce outdoor air pollution, remediation to control levels of indoor radon, carbon monoxide and fitting alarms, and encouraging cycling to target the obesogenic environment. Regional data was included as model evidence to construct a ratings matrix for the city.
When MCDA is performed with uniform weights, the intervention of heavy goods vehicle controls to reduce outdoor air pollution is ranked the highest. Cycling and the obesogenic environment is ranked second.
We argue that a MCDA based approach provides a framework to guide environmental public health decision makers. This is demonstrated through an online interactive MCDA tool. We conclude that MCDA is a transparent tool that can be used to compare the impact of alternative interventions on a set of pre-defined criteria. In our illustrative example, we ranked the best intervention across the equally weighted selected criteria out of the four alternatives. Further work is needed to test the tool with decision makers and stakeholders.
KeywordsEnvironmental Hazard Indoor Radon Excess Relative Risk Qualitative Criterion Multi Criterion Decision Analysis
annual average daily flow
cost of illness
chronic obstructive pulmonary disease
disability adjusted life year
Department for Environment, Food and Rural Affairs
Environmental Public Health
Graphical Information System
heavy goods vehicle
London School of Hygiene and Tropical Medicine
multi criteria decision analysis
Public Health England
quality adjusted life year
quality of life
sheffield elicitation framework
World Health Organisation
In 2006, the World Health Organisation (WHO) estimated that 24 % of healthy life years (LYs) lost and 23 % of premature mortality were related to environmental factors . A subset of these factors are environmental health hazards that have been linked to various acute and chronic diseases, such as carbon monoxide poisoning at a carboxyhemoglobin (CoHB) level of at least 10 %  and metabolic or cardiovascular disorders. Cardiovascular disorders contribute to 27 % of the death rate for all ages in Europe and are second only to neoplasms in the death rates of all ages across Europe . In addition, environmental health hazards also contribute to a range of chronic diseases, such as asthma , autoimmune conditions including arthritis , , autoimmune thyroiditis , celiac disease  and multiple sclerosis . Many of these health outcomes have shown relationships between exposure and disease. Examples include the molecular biology linking vitamin D with multiple sclerosis ,  and the gene mutations associated with α particles from the short-lived radon-222 progeny , .
Government policies on existing interventions can help to manage the health burden caused by environmental health hazards by reducing exposure to such hazards. In this study we present a general decision support methodology for experts in public health. This methodology uses multi criteria decision analysis (MCDA), a method that can be applied to risk prioritisation for environmental public health (EPH) hazard interventions. In contrast to previous studies, we demonstrate how MCDA could be used in a local setting to combine both quantitative and qualitative evidence. The results obtained in this study are for illustrative purposes only, and are not necessarily reflective of the local situation in the city that we model. We focus on developing the methods that can be used to construct the MCDA evidence matrix with a hypothetical case study. Alternative policy evaluation methods exist, such as cost-benefit analysis (CBA) and cost-effectiveness analysis (CEA), and for a comparative analysis of CBA, CEA and MCDA, see . CBA is based on the principal that all costs and benefits can be modelled with financial cost and uses the cost-benefit ratio to compare policies. CEA on the other hand uses the total cost per unit benefit in a criterion as the measure for comparative evaluation. Whilst both CBA and CEA methods provide information on the costs involved, it is difficult to quantify non-market impacts, such as environmental impact, morbidity and wellbeing. In contrast, MCDA is designed to handle multiple criteria in their different units and it could be argued that it is better at comparing policies across a wide range of impacts .
Previous studies in the literature have generated ranked lists of diseases and hazards based on epidemiological criteria, with the aim to inform policy makers on the set of hazards that should take priority. Current methods of prioritization generate quantitative information on the relative severity of each hazard with respect to one or two criteria, such as disability adjusted life years (DALYs) , cost of illness (COI) , quality adjusted life years (QALYs), quality of life (QoL) and relative risks . For example, six microbial illnesses in New Zealand were ranked against DALYs and COI, where it was shown that Campylobacteriosis and sequelae ranked the highest for both . In environmental health, Hollander et al.,  have considered DALYs, life expectancy, QoL and the number of people affected for exposure to factors including particulate air pollution, radon, damp, environmental tobacco smoke and noise, placing particulate air pollution at the top of the ranking list.
Environmental public health hazards, example associated interventions and health effects modelled for the case study
Health effects modelled
Domestic buildings requiring remediation (e.g. retrofitting of active sumps, passive or active ventilation)
Outdoor air pollution
Implementing local air quality management, emissions control (vehicular and industrial) and education
Chronic obstructive pulmonary disease
Indoor Carbon Monoxide
Fitting carbon monoxide alarms, servicing of gas appliances, ventilation, increasing awareness
Encouraging walking and cycling, provision of cycle routes, encouraging the use of public transport, increased access to green spaces and fitness facilities, planning disincentives for fast food restaurants
Chronic obstructive pulmonary disease, all-cause mortality
The paper is divided into three main sections. The first section outlines the MCDA method. The second section describes the details of the case study to illustrate the use of the MCDA method and the third section discusses the findings.
Multi criteria decision analysis
MCDA is a quantitative method that can be applied to evaluate and compare alternative decision options (e.g. EPH interventions) in terms of their impacts on a set of criteria (e.g. mortality, morbidity, costs, environmental sustainability). The main steps of MCDA are (1) problem formulation where the decision options and the criteria are defined, (2) the construction of an evidence matrix which contains the impact of each option on each criterion, (3) weight elicitation which elicits (from decision makers) the relative importance of each criterion and (4) integration of the evidence matrix with the relative weights to provide an overall performance score of each option.
Equation  gives the overall score S i of option i on all the criteria, where n is the number of criteria. The coefficient ω j is a normalised weight, which gives the relative importance of each criterion j. The weights should add up to unity (Eq. ). The variable is an element of the evidence matrix, referred to as the rating of option i against the criterion j which is normalised by a suitably defined constant y j such that, . For each criterion j the set of ratings x ij will have different units of measurement, consequently the ratings are usually standardised in scales of 0–1, 0–100 or 0–1000 . The selection of the scaling constants is subjective. In this study for each criterion we used the sum of impacts across all options as the scaling constant.
The weights ω j are a key component of MCDA because they set the relative importance of each criterion. Every criterion j, is assigned a value of relative importance by the decision maker, or decision making team. Similarly to the ratings, weights are normalised between 0 and 1 and should add to unity across all criteria. This interactive allocation of the importance of each criterion is one example of the transparency of the MCDA approach.
Ratings determine the impact of each object i on each criterion j. In contrast to the weights ω j , the ratings are calculated through mathematical modelling or expert elicitation. When all the ratings are evaluated, they form the evidence matrix. This analysis should be completed before the decision maker assigns weights to the criteria. In this study we present a general framework that could be employed to construct the evidence matrix by focusing on a hypothetical scenario. We will not be eliciting different weights on the criteria in this example, instead we will use a uniform weighting, where each of the weights will be assigned the same value, for illustrative purposes.
Explanation of the quantitative and qualitative criteria used in the MCDA model for this case study
Mortality based on mortality models of relative risk from a change in exposure to the hazard following intervention. Morbidity based on hospital admission models of relative risk from a change in exposure to the hazard following intervention.
Is there robust evidence for the risk?
What is the level of evidence on the risk, i.e. it is robust, plentiful, consistent, accepted by the scientific community
Impact on wellbeing
With the intervention in place, what impact does this have on wellbeing and happiness in particular
‘Sustainability of intervention’
Is the intervention sustainable?
Is the intervention sustainable in terms of economic, social, and environmental impacts? Does it require a lot of resources to keep in place and maintain? Are there social and environmental costs for its implementation and running?
‘Level of regulation’
How regulated is the intervention
Is the intervention subject to regulation? Is it enforceable in law? Are there penalties for failure? E.g. emissions tests.
Quantitative criteria: mortality and morbidity
In the above equation U i is the intervention efficacy and in this study, we set U i = 1 throughout, which assumes that intervention uptake is maximal. Equation  models the evidence that is associated with exposure to the environmental hazard and health effects of intervention. Here, it is used to calculate an approximate number of premature deaths prevented through hazard management. Regional values for and were obtained (see Additional file A1).
Equation  models the number of hospital admissions prevented by hazard management (interventions).
To obtain ratings for the qualitative criteria, we used an expert elicitation method by asking public health and academic experts to fill in a questionnaire distributed in a workshop. Originally, the following seven qualitative criteria were chosen: ‘Robust evidence for risk’, ‘impact on wellbeing’, ‘sustainability of intervention’, ‘level of regulation’, ‘acceptance of intervention by the public’, ‘acceptance of risk by the public’, and ‘prospect of intervention’. During the workshop, we only collected sufficient data from questionnaires on ratings from the first four criteria, and so the remaining criteria (i.e. ‘acceptance of intervention by the public’, ‘acceptance of risk by the public’, and ‘prospect of intervention’) were not considered in the MCDA analysis in this case.
The qualitative ratings were obtained by eliciting expert opinion on the performance of each intervention against the qualitative criteria on a scale from zero to one. Following the approach of Kenyon , questions were presented to academic experts in public health at a workshop on EPH and 15 min were allocated for the experts to provide distributions on the ratings for each intervention. To obtain the expert’s knowledge about the ratings, elicitation techniques were used to construct a probability distribution function for each of the ratings. Distributions were generated using a statistical method outlined in the software SHELF  and experts were asked to provide median, lower and upper quartiles for each rating. Each set of questionnaires addressed one intervention at a time and the questionnaires were designed to be accessible to decision makers with minimal prior knowledge of probability distributions.
The criterion ‘level of regulation’ was measured between “no regulations in place” and a scenario where “strict criteria and controls are maintained”. ‘Robust evidence of risk’ was graded between “no evidence available” and “significant high quality evidence available”. The final two criteria followed some existing definitions in the epidemiology literature. Sustainability was taken to concern the ‘environment, development, human needs and the capacity of the environment to cope with the consequences of economic systems’ . Zero corresponded to a low sustainability and one corresponded to high sustainability of the intervention that can be defined by sustainability measures, i.e. the intervention is completely sustainable. For ‘wellbeing’, the questionnaire focused on the “happiness gained” as a result of intervention. We chose to focus on self-reported happiness, as it has been suggested that it is linked to the built environment .
Example environmental hazards and interventions
Outdoor air quality and controlling the number of heavy goods vehicles
Particulate Matter (PM) has been associated with cardiopulmonary mortality  and morbidity  and the health burden can be reduced through compliance to air quality standards, vehicle emission controls and road traffic interventions . To calculate the change in exposure to particulate matter less than 10 micrometres in diameter (PM10) from limiting the number of heavy goods vehicles (HGV), we focused on the percentage change in Annual Average Daily Flows (AADFs) for HGVs on the A road network in our example city (see Fig. 1). The AADFs provide the number of vehicles that will drive on a particular stretch of road on an average day of the year. Data and geometry of the AADF and A road network in the city were obtained from the open access traffic statistics published by the Department of Transport . To obtain the rating for the impact of HGV controls on health, we calculated the reduction in the disease burden from changes in air pollution (PM10) that occur from a prospective percentage change in AADFs on the A road network in the city. The quoted relative risk for all-cause mortality for a 10 μg/m 3 change in PM10 is 1.1006 in Europe , and so the relative risk coefficient is β PM ≅ 0.01, (see Additional file 1). We calculated the point (central) estimate of the number of preventable deaths D PM by reducing the flow of HGVs by 50 % on the A roads as an example air pollution control measure. This calculation required the predicted change in PM10, which we estimated using CALINE4 , one of many atmospheric emission dispersion software that are available. CALINE4 is an atmospheric dispersion model for line sources (road networks), and can be applied to a range of different geographical settings and where possible, we attempted to fit all parameters to existing data, using UK vehicle fleet averages and emission rates (see Additional file 2). This analysis predicted a change in PM10 of 2.5 μg/m 3 (decrease per year), which could be substituted into Eq.  to obtain the number of deaths prevented D PM ≅ 30 per year for the city. Next, we calculated the morbidity impact. The quoted relative risk of hospital admissions for chronic obstructive pulmonary disease (COPD) for a 10 μg/m 3 change in PM10 is 1.38 . The prevalence of COPD hospital admissions in the region of our city is ~0.2 %  and so m PM ≅ 36 hospital admissions avoided per year. We only calculated morbidity impacts for COPD as an example of morbidity impacts.
Remediation to control levels of indoor radon
Radon is a naturally occurring, radioactive gas that is produced from rocks and soils . It is known that residential ingress of radon can increase the risk for lung cancer in the population, where the quoted relative risk of lung cancer incidence for a 100 Bq/m 3 increase in measured radon is 1.16 . Methods to reduce levels of indoor radon include built-in protection and remediation , . There are various types of radon remediation available and in this example we chose the retrofitting of under floor ventilation in the form of active sumps for residential properties as an illustrative intervention . It has been estimated that at most 2400 homes are at or above the action level in our city . To obtain the regional population that would be affected by retrofitting this intervention, we assume the scenario that all houses that are at or above the action level could be remediated. This number of houses is multiplied by the average household size for the city of 2.3 persons per household , so that the estimated population that is exposed is around 5520 people. To estimate the reduction of indoor radon, we take the average level of radon for homes in the city, that warrant remediation, of 300 Bq/m 3 which would be reduced by a reduction factor of 5.3 . The reduction factor is the ratio of the initial radon concentration divided by the concentration after remediation. Using this ratio and rearranging the equation gives an approximate reduction of 243 Bq/m 3. Previous studies on radon-related housing interventions have only considered health effects associated with lung cancer mortality . To obtain the associated reduction in risk we used the age standardised crude mortality rate for lung cancer averaged between men and women. In 2011, this was 73.45 per 100,000 population in the city . By substitution of the demographic values specific to our city into Eqs.  and , we obtained the number of preventable deaths D R ≅ 1.2 per year. Relative to D PM , D R is small, however this is expected because the number of people in the remediated homes initially exposed to indoor radon was approximated as 5520 (see supplementary Additional file 1).
The quality of indoor air and fitting carbon monoxide alarms
Long term exposure to carbon monoxide (CO) has been associated with a range of adverse health effects, such as headache and exacerbation of COPD , self-reported neurological symptoms , angina in patients with ischemic heart disease, mild neurological effects, atherosclerosis, low birth weight  and congestive heart failure among the elderly , . CO is a colourless, odourless gas and has a short half-life; symptoms are often similar to flu, which makes it difficult to identify and there may be many missed opportunities to intervene. Recently, a study on the prevalence of potential exposure to CO in Hackney Homes (inner London social housing) was conducted . McCann et al. , estimated a CO alarm incidence rate of 4.64 incidence per 1000 households over a six month period, for CO levels above 50 ppm. Morris et al.,  have calculated a relative risk of 1.22, associated with an increase of 10 ppm in CO for hospital admission due to cardiovascular disease (congestive heart failure). Typical background levels of CO in UK homes range from 0–48 ppm  and there are 108,000 households in our example city. Here, we assumed a worse case scenario of levels at around 50 ppm so that, at maximum efficiency, the intervention would reduce levels by 50 ppm. To calculate the mortality and morbidity ratings, we substituted the number of people exposed and the prevalence of heart failure of 0.7 %  into the Eq. . This gave a result of m CO ≅ 10 hospital admissions avoided. There are approximately 40 deaths per year due to acute carbon monoxide poisoning, although this figure is thought to be an underestimation of the true burden . This value is small compared to the relative risk of hospital admission due to congestive heart failure. Thus D CO ≅ 0.
The obesogenic environment. Encouraging cycling through the provision of cycle routes and lanes
The obesogenic environment has been shown to have an effect on the prevalence of type 2 diabetes, dementia, ischaemic heart disease, cerebrovascular disease, breast cancer, colorectal cancer and depression , . Interventions are being encouraged to help tackle obesity within the population and include promotion of cycling to work through the provision of cycle routes or lanes and cycle to work schemes with tax benefits. For this environmental hazard, the intervention is counterfactual. Our example city promotes cycling, by providing the following facilities; (1) cycle lanes (mandatory and advisory), (2) contra-flow cycle lanes, (3) contra-flow cycle streets, (4) cycle paths and (5) cycle tracks. These facilities are complemented by tax incentives for buying a cycle for commuting purposes through the Finance Act (1999) , which was introduced to promote healthier journeys to work and reduce environmental pollution. The quoted relative risk for all-cause mortality for an increase of 11 metabolic equivalent (MET) hours of physical activity per week is 0.81 , , where MET hours are measures of the energy cost of a physical activity per hour. In 2011, it was estimated that 3055 people in our example city travelled to work by bicycle and the average speed of a cyclist is 13.4 km/h . To calculate the distance covered by the cycle routes in the city, we used the measure tool in ArcGIS. The distance covered by the national, local and National Cycle Network combined was 88,958 metres, which is less than the average distance covered for the average cyclist in a week of 93,730 metres. The average trip length for a UK cyclist per week was calculated by multiplying the average trip length (5150 metres ) by the number of trips per day (2.6) times seven (number of days in a week). To obtain the relative risk for this level of physical activity per week, we used the MET intensity for cycling of 8.5  and the duration of hours cycled per week. By substitution of the values into Eq. , D o ≅ 12 deaths avoided. To obtain the morbidity impact, we considered the number of hospital admissions associated with an increase in physical activity. For levels of moderate physical activity, the relative risk for COPD hospital admissions due to an increase in physical activity is 0.68 . The prevalence of COPD hospital admissions in our region is ~0.2 % . We approximated moderate physical activity with a value of 2 METs to calculate the exposure response coefficient. The values were substituted into Eq.  to calculate the morbidity impact: m o ≅ 6 hospital admissions averted.
Qualitative criteria: expert elicitation
Integrating the evidence
In this study we have demonstrated how MCDA could be applied in public health to evaluate, compare and rank interventions that mitigate the effect of environmental hazards on health across several criteria. The range and complexity of environmental health hazards to which the UK population is exposed is vast. Because of competing demands on resources, and a reduction in the public budget of governments, there is a need to prioritise the most significant environmental health hazards where interventions are likely to yield the greatest health benefit, whilst taking into account important factors such as the prospect of intervention and presence of statutory regulations. The MCDA methodology presented here is intended to provide a decision support framework for decision makers in a local authority who are responsible for distributing and allocating resources. Determining the best policy procedure is not intuitive, when dealing with multiple criteria. The decision problem is multidimensional in nature and as such, quantitative methods that combine the evidence based on the impact of interventions can be applied to rank interventions in terms of their performance across several criteria. The MCDA tool is designed to evaluate and compare interventions to reduce the health burden attributable to environmental hazards. Where local evidence has not been obtainable, we have used evidence from the literature to assign the relative risk of disease for local environmental hazards. We envisage that through a working partnership with experts who have practical experience of the current hazards and interventions required, that MCDA could help prioritise health hazards and their interventions and be applicable to provide quantitative predictions of the impact of policies that can reduce the health burden.
The use of MCDA to aid UK policy decision making is currently limited but has been applied to air quality  and flood defences . Decision making usually relies on expert option as to how the proposal fits with national and local policy, the underpinning strength of evidence, the ease of its implementation, and the views of the public. The application of MCDA to support UK health policy is becoming more accessible with detailed studies on how to correctly apply MCDA, for example choosing among statins in primary healthcare prevention . MCDA as a support tool in EPH fits with more strategic approaches including the use of ecological linkage frameworks that more explicitly incorporate the ‘distal’ determinants of health outcomes and related policy levers across a breadth of local settings. MCDA could be used within an ecosystems-enriched Drivers, Pressures, State, Exposure, Effects, Actions (eDPSEEA) conceptual model which integrates human health and environmental impact analysis. The model uses the concept of ecosystems services to emphasize human health and well-being values alongside the health of the environment . Our application of MCDA has been shown to support the growing calls for ‘ecological public health’ as advocated by eDPSEEA.
We presented a practical application of MCDA based on an example UK city. The scope of interventions considered here is minimal and was used only for illustrative purposes. There are many other interventions to manage the wide range of environmental hazards to which populations are exposed (e.g. waste management options). Similarly, the criteria considered is also minimal and does not reflect the range of criteria that would need to be considered for a practical application. For example, cost will vary considerably between each intervention chosen and often ultimately drives the decision. For a practical application of MCDA, experts in EPH could be approached for advice on which criteria to include in the MCDA model.
The purpose of our study was to demonstrate the potential benefit of using MCDA in supporting public environmental health decision-making. Thus, further data collection and analysis on both the quantitative and qualitative evidence would be required for a future in depth study and practical application. In particular, some excess relative risks refer to all-cause mortality and others specific-cause mortality. The evidence for the quantitative criteria is dependent on the availability of epidemiological data in the literature. Another study in this special issue presents scientific evidence for health affects due to indoor air pollutants . In the study Asikainen et al. it is stated that current ventilation standards are specified by satisfaction with air quality. This approach to maintaining standards is limited because it does not elucidate health impacts due to long term exposure to indoor air pollution. By modelling three alternative exposure control scenarios, they found that indoor source control results in the largest health benefit. In a practical application of MCDA, it will be important for decision makers and experts in environmental health to be aware of the range of quantitative exposure impact models that are available, such as . Where these models are available, the data should be incorporated into the MCDA evidence matrix.
The robustness of the final ranking of interventions could be investigated by performing MCDA under different scenarios and carrying out sensitivity analysis. For example, for outdoor air quality, a realistic intervention may not be able to reduce the flow of HGVs by 50 %. A 10 % reduction may be a more realistic target. We have used local data from a real city where we had data as an example to show how this could be applied to any population centre. In some calculations, local data was not available. Region specific data was obtained through local profiles of health and wellbeing within communities, such as from the Joint Strategic Needs Assessment, or County level health profiles , . We assumed the road network only within our example city and not including neighbouring routes. Uncertainty could arise in the relative risk calculation, however with uniform weights, the final rank in our example is robust to perturbation in exposure and relative risk.
Limitations were also imposed on the analysis by the available data and assumptions made. For example in the radon assessment we have assumed that risk exists only for houses at or above the action level. A residual radon associated lung cancer risk also exists amongst those who live in houses below the action level, limiting the validity of our model of effect. Additionally, there are around 40 deaths per year due to carbon monoxide , however due to insufficient epidemiological evidence on relative risks, we have set the mortality rating for carbon monoxide to be zero. It is thought that the estimates of chronic carbon monoxide exposure are underestimated , , however, improved diagnosis and exposure estimates could help to gain a better understanding of mortality associated with carbon monoxide poisoning. For example, Davis and Cummings suggest the use of key diagnostic questions in clinical practice that could help identify CO related health outcomes .
In our pilot workshop, we produced questionnaires for seven criteria. These included: ‘acceptance of intervention by the public’, ‘acceptance of risk by the public’, and ‘prospect of intervention’ in addition to the four analysed in this study. To elicit a distribution of values from the data, we randomly chose three complete questionnaires. For each of these questionnaires, we required the upper and lower quartiles and the median values for each hazard and associated intervention. It was not possible to obtain these data for the criteria ‘acceptance of intervention by the public’, ‘acceptance of risk by the public’ and ‘prospect of intervention’. This was because a number of the participants had marked the box “don’t know” in the distribution. In a further study, it may be possible to survey the public on the acceptance of risk through questionnaires distributed to affected residents.
To integrate the evidence matrix with the weightings we applied uniform weights. Different weights across the criteria could be obtained by approaching experts in EPH, e.g. Directors of Public Health and environmental health practitioners in local authorities to elicit the weightings. When the final decision involves a group of stakeholders, different elicitation methods exist that can be used to integrate the individual weights, as outlined by Jia et al., . For this example, we need to apply the model/tool to the real world, to test its application and obtain stakeholder feedback to add differential weights to the criteria that may affect the final ranking of the prioritised interventions.
We have demonstrated that MCDA can be used in practice to support environmental health policy makers decide on the most appropriate interventions across a pre-defined set of criteria. The MCDA requires input on the impact of each intervention on each criterion (ratings) and on the relative importance of the criteria (weightings). The ratings can be obtained from models or elicited from experts. Weightings are normally elicited from decision makers. MCDA can be adopted as a practical, transparent tool to guide local authorities and environmental health policy makers. Further work is needed to test the tool with decision makers and stakeholders, where ease of use and compliance with the tool could be assessed and support provided where necessary. To apply MCDA in local authority settings for EPH, we suggest that decision makers can be supported in constructing the ratings by research scientists with expertise in epidemiology and exposure modelling. Once the ratings have been calculated, decision makers can then use decision support tools, such as Annalisa to perform the MCDA and obtain the ranking of intervention options.
Any views or opinions presented in this paper are those of the authors and do not necessarily represent the views of Public Health England (PHE). We thank colleagues at PHE, for their input and feedback for the project, including Tayo Owodunni and Neil Higgins. Neil McColl and Jane Bradley at PHE for information on the risk of radon. Colleagues James Milner, Cathryn Tonne, Jack Dowie, Noah Scovronik, and Daniel Lewis from LSHTM for helpful comments and suggestions. Sustrans and Plymouth City Council for providing information and data on the local cycle routes. We thank all the participants of the MCDA session at the EPH tracking workshop at the ISEE conference in Basel, Switzerland in August 2013, including An Van Nieuwenhuyse, Tom De Smedt, Peter Part, Normunds Kadikis, Leonid Turczynowicz and Kassem El Saddik, for providing expert opinion and completing questionnaires.
Peer review reports for this article are attached as Additional file 3.
Open access funding for publication of this article was provided by University College London open access. The study was funded by a competitive internal PHE Development Fund for developing research on the practical application of MCDA in EPH, to fund the collaboration with the London School of Hygiene and Tropical Medicine.
This article has been published as part of Environmental Health Volume 15 Suppl 1, 2016: Healthy-Polis: Challenges and Opportunities for Urban Environmental Health and Sustainability. The full contents of the supplement can be found at http://www.ehjournal.net/supplements/15/S1.
- 1.Prüss-Üstün A, Corvalán C, World Health Organization: Preventing disease through healthy environments : towards an estimate of the environmental burden of disease. 2006, World Health Organization, Geneva, SwitzerlandGoogle Scholar
- 3.Mortality Statistics. Deaths Registered in 2011 (Series DR) Tables 1–4 and Tables 6–14. In Book Mortality Statistics: Deaths Registered in 2011 (Series DR) Tables 1–4 and Tables 6–14 (Editor ed.). 2011.Google Scholar
- 10.Compston A: McAlpine's multiple sclerosis. 2005, Churchill Livingstone Elsevier, Philadelphia, 4Google Scholar
- 11.Ramagopalan SV, Maugeri NJ, Handunnetthi L, Lincoln MR, Orton SM, Dyment DA, et al: Expression of the multiple sclerosis-associated MHC class II Allele HLA-DRB1*1501 is regulated by vitamin D. PLoS Genet. 2009, 5: 10.1371/journal.pgen.1000369. Article ID e1000369Google Scholar
- 21.Phillips L, Stock A. Use of Multi-Criteria Analysis in Air Quality Policy. In Book Use of Multi-Criteria Analysis in Air Quality Policy (Editor ed.). England: Department for Environment, Food and Rural Affairs; 2003.Google Scholar
- 25.Dowie J, Kaltoft M K, Salkeld G, Cunich M. Towards generic online multicriteria decision support in patient-centred health care. 2015;18(5):689–702.Google Scholar
- 34.Hubbell BJ: Health Benefits of Reducing Particulate Air Pollution from Heavy Duty Vehicles. In Book Health Benefits of Reducing Particulate Air Pollution from Heavy Duty Vehicles (Editor ed.). 2002.Google Scholar
- 35.Department for Transport: Annual average daily flows. http://www.dft.gov.uk/traffic-counts/; 2012.
- 37.Benson PE. CALINE 4. A dispersion model for predicting air pollution concentrations near roadways. FHWA/CA/TL-84-15 1989.Google Scholar
- 38.Maconachie M, Hoad S, Nelder R, Chant S: Health and wellbeing profile. North, East and West Devon CCG and its three localities. 2014, Public Health, Office of the Director of Public Health, Plymouth City CouncilGoogle Scholar
- 39.Douple EB, Samet JM. Health effects of exposure to radon (BEIR VI). Radiation Research, Vol 2, Congress Proceedings 2000:784-787.Google Scholar
- 41.BRE (1993–2001). Guides to radon remedial measures in existing buildings. A series of easy to follow guides. London, Construction Research Publications Ltd.Google Scholar
- 42.BRE: Radon: guidance on protective measures for new buildings. 2007, Construction Research Publications Ltd, LondonGoogle Scholar
- 43.Hodgson SA, Zhang W, Bradley EJ, Green BMR, McColl NP. An Analysis of Radon Remediation Methods. ISBN 978-0-85951-694-5. HPA-CRCE-019. Health Protection Agency;. 2011, https://www.gov.uk/government/uploads/system/uploads/attachment_data/file/340152/HPA-CRCE-019_for_website_2016_3_.pdf, .
- 44.Rees DM, Bradley EJ, Green BMR. Radon in Homes in England and Wales: 2010 Data Review. ISBN: 978-0-85951-688-4. HPA-CRCE-015. Health Protection Agency; 2011.Google Scholar
- 45.Milner J, Shrubsole C, Das P, Jones B, Ridley I, Chalabi Z, et al: Home energy efficiency and radon related risk of lung cancer: modelling study. BMJ. 2013, 348: 17493-Google Scholar
- 46.Health and Social Care Information Centre. Mortality from lung cancer (ICD10 C33-C34); males and females, all ages. 2011-2013.Google Scholar
- 47.Clarke S, Keshishian C, Murray V, Kafatos G, Ruggles R, Coultrip E, et al: Screening for carbon monoxide exposure in selected patient groups attending rural and urban emergency departments in England: a prospective observational study. BMJ open. 2012, 2: 10.1136/bmjopen-2012-000877. Article ID e000877Google Scholar
- 53.Department of Health. Guidance on the effects on health of indoor air pollutants. Committee on the Medical Effects of Air Pollutants. 2004.Google Scholar
- 54.NHS. Quality and Outcomes Framework (QOF) for April 2011 - March 2012, England. The information centre for health and social care 2012.Google Scholar
- 55.Davies S, Cummings J. Carbon monoxide poisoning: Recognise the symptoms and tackle the cause. 2013.Google Scholar
- 56.Goodwin DM, Cummins S, Sautkina E, Ogilvie D, Petticrew M, Jones A, et al: The role and status of evidence and innovation in the healthy towns programme in England: a qualitative stakeholder interview study. J Epidemiol Community Health. 2013, 67: 106-12. 10.1136/jech-2012-201481.CrossRefGoogle Scholar
- 61.Department for Transport. Average trip length by main mode: Great Britain. National Travel Survey 1995/97 to 2012: Table NTS0306.Google Scholar
- 64.Tervonen T, Naci H, van Valkenhoef G, Ades AE, Angelis A, Hillege HL, et al. Applying Multiple Criteria Decision Analysis to Comparative Benefit-Risk Assessment: Choosing Among Statins in Primary Prevention. Med Decis Making. 2015;18.Google Scholar
- 65.Reis S, Morris G, Fleming LE, Beck S, Taylor T, White M, et al: Integrating health and environmental impact analysis. Public Health. 2013Google Scholar
- 66.Asikainen A, Carrer P, Kephalopoulos S, de Oliveira Fernandes E, Wargocki P, Hänninen O. Reducing burden of disease from residential indoor air exposures in Europe (HEALTHVENT project). Environ Health. 2016;15(Suppl 1):xx.Google Scholar
- 67.Ghosh RE, Close R, McCann LJ, Crabbe H, Garwood K, Hansell AL, Leonardi G. Analysis of hospital admissions due to accidental non-fire-related carbon monoxide poisoning in England, between 2001 and 2010. J Public Health 2015, 1-8. doi:10.1093/pubmed/fdv026.Google Scholar
This article is published under license to BioMed Central Ltd. Open AccessThis article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.