Demonstration of IS711 transposition in Brucella ovis and Brucella pinnipedialis
- 4.3k Downloads
The Brucella genome contains an insertion sequence (IS) element called IS711 or IS6501, which is specific to the genus. The copy number of IS711 varies in the genome of the different Brucella species, ranging from 7 in B. abortus, B. melitensis and B. suis to more than 30 in B. ovis and in Brucella strains isolated from marine mammals. At present, there is no experimental evidence of transposition of IS711, but the occurrence of this element with a high copy number in some species, and the isolation of Brucella strains with "ectopic" copies of IS711 suggested that this IS could still transpose.
In this study we obtained evidence of transposition of IS711 from the B. ovis and B. pinnipedialis chromosomes by using the "transposon trap" plasmid pGBG1. This plasmid expresses resistance to tetracycline only if the repressor gene that it contains is inactivated. The strains B. melitensis 16 M, B. abortus RB51, B. ovis BOC22 (field strain) and B. pinnipedialis B2/94, all containing the plasmid pGBG1, were grown in culture media with tetracycline until the appearance of tetracycline resistant mutants (TcR). TcR mutants due to IS711 transposition were only detected in B. ovis and B. pinnipedialis strains.
Four different copies of IS711 were found to transpose to the same target sequence in the plasmid pGBG1. This demonstrated that IS711 are active in vivo, specially in Brucella species with a high number of IS711 copies as B. ovis and B. pinnipedialis.
KeywordsBrucellosis Insertion Sequence Tetracycline Resistance Gene Brucella Species Brucella Strain
Bacteria in the genus Brucella are the etiological agents of brucellosis, one of the most important zoonotic diseases, affecting human and domestic animals of high economic and social value. The genus contains several species that are defined mainly on the basis of animal host specificity . A growing interest in development of tools for molecular epidemiology and control of brucellosis has resulted in a large amount of published genome sequence data. The complete genome sequences of B. melitensis , B. suis , and two B. abortus strains [4, 5] are already published, and the genome sequences of B. ovis, B. canis and the B. abortus vaccine strain S19 are also completed but not published yet.
The genus Brucella bears an Insertion sequence (IS) element, originally detected in Brucella ovis as a repeated polymorphic DNA sequence in 1990 . Subsequently, this repeat was proposed to be an IS based on its genetic organisation, which is similar to that of some elements described before, and named as IS711  or IS6501 . IS elements are defined as small segments of DNA with a simple genetic organisation and capable of inserting at multiple sites into target DNA molecules. The best known ISs are those of the Gram-negative bacteria, but these mobile elements have been widely reported in a variety of bacterial genera. A compilation of the available data on insertion sequences can be found in the IS database .
IS711 is an 842 bp element bounded by 20 bp imperfect inverted repeats. This IS contains two overlapping open reading frames, which are believed to translate into a single polypeptide by means of a -1 frameshift of the translation apparatus, a feature also present in other ISs [10, 11]. IS711 appears to duplicate the dinucleotide TA of the consensus target site, YTAR .
IS711 is exclusively present in the genome of all described species of the genus Brucella. The sequenced genomes of closely related α-proteobacteria do not contain an IS obviously related to IS711, suggesting that this insertion sequence is an element native to the genus Brucella. Furthermore IS711 has been shown to be associated with the repeated elements BRU-RS1 and BRU-RS2 that could represent insertion hot spots for this IS [12, 13].
Some published work already suggested that IS711 could be an active transposon . The copy number of IS711 is different in the species of the genus. B. melitensis has 7 copies of this element; the same number as B. abortus and B. suis. However, B. ovis contains about 35 copies [7, 8], and the recently discovered Brucella from marine mammals carry more than 20 IS711 copies . Furthermore, the finding of a new IS711 copy inactivating the wboA gene in the vaccine strain RB51 also indicated that IS711 could be an active element. However, there is no experimental evidence of IS711 transposition up to now. Due to its proven genomic stability, IS711 has been used as a target to identify Brucella species and biovars [12, 16].
Other ISs have been described in Brucella in addition to IS711, such as the elements named ISBm1, ISBm2 and ISBm3  and ISBm4 , as well as IS2020, which forms part of the composite transposon Tn2020 , but the mobility of these elements has not been observed experimentally.
In this study we report evidence for IS711 transposition from B. ovis and B. pinnipedialis by using pGBG1, a plasmid for isolating mobile DNA elements . This constitutes the first experimental report of activity of a transposon in the genus Brucella.
Results and discussion
Isolation and characterisation of tetracycline resistant derivatives of PGBG1 in Brucella
The transposon trap plasmid pGBG1 was introduced into Brucella by conjugation as described in the Materials and Methods. Plasmid PGBG1 carries a tetracycline resistance gene whose transcription is blocked by the repressor of bacteriophage lambda. Insertions of resident transposons into the repressor gene result in transcription of the TcR gene of pGBG1 and can be selected on tetracycline containing media. As a preliminary step for the transposition experiments, we determined the stability of pGBG1 and the MIC of tetracycline for the different Brucella species to be used, since this plasmid had not been employed before in this genus. As result of these studies we found that Brucella strains must be grown in the presence of chloramphenicol in order to maintain pGBG1, and also determined that the most appropriate tetracycline concentration to avoid the appearance of spontaneous mutants in plasmid free Brucella was 30 μg ml-1. To assay for transposition, various independent colonies (10–20) of each Brucella strain carrying pGBG1 were grown in appropriate media. Cultures (0.1 ml) were then plated separately on agar plates with 30 μg ml-1 of tetracycline or with 25 μg ml-1 of chloramphenicol (after dilution), and incubated at 37°C in 5% CO2 atmosphere until growth was observed.
Frequencies of appearance of TcR mutants in Brucella containing pGBG1
Frequency of TcR mutants*
Number of TcR mutants analysed
Number of mutants with insertions
% of insertions detected
Mobile element involved
B. ovis BOC22
(20) 8.6 × 10-8
B. abortus RB51
(10) 2.9 × 10-9
B. melitensis 16M-N
(10) 3.05 × 10-7
B. pinnipedialis B2/94
(10) 5.0 × 10-8
Identification of IS711 in pGBG1 TcRinsertions
The different restriction patterns obtained with HaeIII could indicate that the IS had inserted in different positions of the target gene, but could also be the result of IS711 sequence polymorphism in B. ovis and B. pinnipedialis, as both species are poorly characterised. In order to clarify this point, the PCR products obtained from selected tetracycline resistant insertional mutants (pGBG1::IS711) were purified and sequenced with the ISOUT1/ISOUT2, and the REPTC1/REPTC2 pairs of primers (Fig. 1 and Table 2).
Sequence analysis of the IS711inserted copies
Twenty one PCR products from pGBG1::IS711 tetracycline resistant mutants were selected to determine the complete sequence of the IS711 copy which integrated into cI gene. The sequence analysis showed that all the IS711 insertions had taken place at the same point within the cI gene, near its 5' terminal end. In all cases the insertion occurred at the sequence TTAA according to the predicted IS711 target. The central dinucleotide TA was duplicated at both sides of the element as was expected. IS711 insertions at this point occurred in the two possible orientations. It was surprising to find that all the IS711 insertions occurred in the same point of the cI gene. Transposons vary in the degree of target specificity from highly specific (i.e. Tn7) to near random insertion transposons . The observance of a single insertion site among 40 independent transposition experiments indicated a strong degree of specificity in target selection. The reported target for IS711 integration was the very frequent YTAR sequence. However, a preference for insertion of IS711 into the Bru-RS palindromic repeats has also been reported, indicating the existence of some undetermined determinants of integration specificity. Our experimental system can only detect insertions into the 1 kb cI gene, which contains around fifteen YTAR sites. The reason for the observed transposition preference for a single site remains unexplained.
Sequence analysis indicated the presence of four different copies of IS711 disrupting the cI gene. Each copy was designated with a different nomenclature: IS711-IsoA, IS711-IsoB, IS711-IsoC and IS711-IsoD. Nucleotide sequences of these IS711 copies were compared with the copy named IS711A from B. ovis (GenBank Accession number: M94960). The copy designated as IS711-IsoB was identical to IS711A. Differences between other IS711 copies were due to a few nucleotide substitutions that in some cases led to the appearance or disappearance of some of HaeIII restriction sites (Figure 3b). These sequence differences were responsible of the remaining diversity in HaeIII digestions shown in Fig. 3. Some of these nucleotide changes were silent and the putative transposases of the different IS711 copies were identical to that of IS711A, with the exception of IS711-IsoD which was different to other copies by 3 amino acids which were Gly in place of Arg, Lys replacing Glu and Val instead of Ala.
These results demonstrate that some of the IS711 copies in B. ovis and B. pinnipedialis were transpositionally active even when the observed transposition frequency was very low. We were unable to precisely determine transposition frequencies with this assay but if we consider that the tetracycline resistant colonies selected for analysis were representative of the whole population, we know that 57.7% of the mutants obtained in B. ovis and 11.4% of those obtained in B. pinnipedialis were due to IS711 transposition (Table 1). These percentages allowed us to estimate the average transposition frequency around 10-8 in both species. These frequencies are low when compared with other transposons.
Transposition activity of IS711
Transposition of IS711 was detected only in B. ovis and B. pinnipedialis. We were unable to detect transposition either in B. abortus or in B. melitensis under the same experimental conditions. Many attempts to detect IS711 transposition in E. coli from plasmids containing cloned copies of IS711 were also unsuccessful, even when powerful detection systems as the sacB transposon trap  were used (data not shown). All these data indicated that IS711 transposition activity was very low, restricted to Brucella maybe due to the requirement for specific host factors, and only detectable in species with a high number of copies of IS711 per genome. The presence of some IS711 copies in these species encoding a full length transposase without the need for a frameshift event, could explain the observed transposition capability. However, such a copy of IS711 has not been observed in the genomic sequence of B. ovis released recently to GenBank and a gene dosage effect is a more favoured hypothesis for transposition in B. ovis and B. pinnipedialis. The requirement for many copies of the IS could be due either to a very low level of expression of the transposase, requiring an increased dose effect for activity, or to the presence of point mutations leading to inactivity of some of the copies found in B. abortus and B. melitensis. There are several reasons that could explain a low level of IS711 transposase expression. Firstly, that the regular initiation codon for IS711 OrfA is GTG, a less efficient initiation codon than the canonic ATG. Secondly, that a -1 frameshift could be necessary in order to have an active IS711 transposase molecule. This event is usually very inefficient with less than 5% of the translation products shifted to translate into the complete transposase. Furthermore, in some insertion sequences OrfA possesses an inhibitory action on the transposition process .
We examined the nucleotide sequence of the IS711 copies in the genomes of the three sequenced Brucella species and analysed them to detect the reasons for their inactivity. In some of the copies either OrfA or OrfB were truncated or altered by single nucleotide insertions or deletions. Furthermore, we found that in many of these copies the start codon for OrfA was TTG instead of GTG as happens in all the copies rescued after inactivation of the cI repressor in pGBG1. TTG has been reported to be less efficient than GTG as a translation initiation codon . These data support that the lack of activity observed in B. abortus and B. melitensis as well as the low transposition frequency observed in B. ovis and B. pinnipedialis could be due to the low expression (translation) of the IS711 transposase protein.
Distribution and analysis of IS711 in the Brucellasequenced genomes
The reported sequence of IS711 , (GenBank accession M94960) was compared with the available Brucella genomic sequences using local BLAST searches. The results showed the presence of 7 IS711 copies in B. suis and B melitensis. B abortus 9_941 also presented 7 IS711 copies but one of them was severely truncated and reduced to a 100 bp terminal remnant. B. abortus 2308 contained the same IS711 copies as the strain 9_941 and one additional IS711 copy located at exactly the same position as one of the pre-existing copies. It is well known that the B. abortus vaccine strain RB51, which is a derivative of 2308, contains an extra copy of IS711 interrupting the wboA gene .
If we correlate the sequence analysis with the results presented in this study, we can conclude that the natural transposition of IS711 occurs at very low frequency, probably due to a poor expression of IS711 transposase. This limitation can be overcome in B. ovis by the high copy number of IS711.
In conclusion, our results demonstrate experimentally for the first time that IS711 is an active insertion sequence of the Brucellae. On the other hand, the low transpositional activity of the sequence allows the use of this element as a tool for molecular identification, at least for the species containing a low number of copies of this insertion sequence.
Bacterial strains plasmids and growth conditions
Bacterial strains and plasmids used in this study
TpR SmR, recA, thi, pro, hsdR-M+ RP4: 2-Tc:Mu: Km Tn7 λ pir
B. abortus RB51
RifR, rough mutant of 2308
B. melitensis 16M-N
Spontaneous NalR mutant of ATCC 23456
B. ovis BOC 22
Rough field strain, CO2 dependent
B. pinnipedialis B2/94
Brucella marine strain isolated from common seal, CO2 dependent
CmR, transposon trap derivative of pBBR-MCS1
pGBG1 (courtesy of M. Blot), is a derivative from the broad host-range, mobilizable plasmid pBBR1-MCS  containing a transposition selection module with a tetracycline resistance gene (tetA) whose expression is blocked by λ repressor cI. This plasmid allows positive selection for tetracycline resistance of transposon insertions inactivating the repressor .
General DNA manipulations, PCR and Southern blot hybridisations
DNA preparations, purifications, restriction endonuclease digestions and agarose gel electrophoresis were carried out according to described standard protocols .
Oligonucleotide primers used in this study were purchased from MWG Biotech and are listed in Table 2. PCR reactions were usually performed in 25 μl reaction volumes containing 0.2 μM of each primer, 2.5 μl of 10× PCR reaction buffer, 1.5 mM of MgCl2, 0.2 mM of dNTPs (Applied Biosystems), 25 ng of template DNA and 1 unit of BioTaq DNA polymerase (Bioline). Amplification was performed in a thermal cycler (GeneAmp PCR System 2400, Perkin Elmer) as follows: denaturation step at 94°C for 3 min and 25 cycles of 94°C for 30 s, 50°C for 30 s and 72°C for 1 min. After the last cycle the reaction mixture was reincubated at 72°C for 5 min.
Preparation of the IS711 probe was performed by PCR amplification with two primers, 711u and 711d, using genomic DNA from B. melitensis 16 M as template. The PCR reaction was carried out as described and the amplified DNA fragment to be used as a probe was recovered from an agarose gel by using the QIAquick Gel Extraction Kit (QIAGEN). The probe was labelled with digoxigenin using a DIG-High Prime DNA Labelling and Detection Kit (Roche Diagnostics GmbH) as described by the supplier. Southern blot hybridisation with the DIG-labelled probe was performed as described before .
Introduction of plasmid pGBG1 into Brucella was performed by conjugation from E. coli S17.1. The experiments were carried out by filter mating as follows. Equal volumes (500 μl) of mid-log-phase cultures of E. coli S.17 (pGBG1) as donor and B. abortus RB51, B. melitensis 16M-N, B. ovis BOC22 or B. pinnipedialis B2/94 as recipients were mixed and then washed with sterile PBS by centrifugation. The mixtures were spread on 0.22 μm filters (24 mm diameter, GSWP, Millipore), placed on a Brucella agar plate and incubated at 37°C for 12 h in 5% CO2atmosphere. After this period of incubation the filters with the conjugation mixtures were washed in 3 ml of BB medium. Different serial dilutions (10-1-10-3) of the conjugation mixtures were plated onto the appropriated media until growth was observed. The transconjugants of B. melitensis 16M-N and B. abortus RB51 were selected on Brucella agar medium with chloramphenicol (25 μg ml-1) and either nalidixic acid (20 μg ml-1) or rifampicin (50 μg ml-1) respectively. Transconjugants of B. ovis BOC22 and B. pinnipedialis B2/94 strains were selected on BA medium supplemented with 10% of foetal bovine serum containing chloramphenicol (25 μg ml-1) and a mixture of antibiotics (vancomycin, 3 μg ml-1; colistin, 7.5 μg ml-1; nystatin 12.5 units ml-1 and nitrofurantoin 10 μg ml-1) to counterselect against the donors. The presence of pGBG1 in the transconjugants was confirmed by extraction of plasmid DNA and analysis on agarose gels.
DNA sequencing and data analysis
PCR products were purified for sequencing by using the QIAquick Gel Extraction Kit (QIAGEN). All PCR products were sequenced by our Sequencing Service using a commercial cycle sequencing kit (Perkin Elmer, Dye Terminator Cycle Sequencing Ready Fraction Kit) according to the manufacturer's conditions. Both, the nucleotide and protein sequence analysis of the different IS711 copies isolated from each Brucella strains were performed by using the Vector NTI version 5.5 computer program (Informax Inc.). Sequences were compared with the IS711 copies reported in GenBank with the BLAST sequence comparison tool .
Preliminary sequence data of the B. ovis genome was obtained from The Institute for Genomic Research 
This work has been supported by grants from the "Instituto de Salud Carlos III" of the Spanish Ministry of Health to the "Network for Brucellosis research/G03-204" and PI05/2499. We thank M. Blot for providing pGBG1 and C. Marín Alcalá for providing B. pinnipedialis strain B2/94.
- 2.DelVecchio VG, Kapatral V, Redkar RJ, Patra G, Mujer C, Los T, Ivanova N, Anderson I, Bhattacharyya A, Lykidis A, Reznik G, Jablonski L, Larsen N, D'Souza M, Bernal A, Mazur M, Goltsman E, Selkov E, Elzer PH, Hagius S, O'Callaghan D, Letesson JJ, Haselkorn R, Kyrpides N, Overbeek R: The genome sequence of the facultative intracellular pathogen Brucella melitensis. Proc Natl Acad Sci U S A. 2002, 99: 443-448. 10.1073/pnas.221575398.PubMedCentralCrossRefPubMedGoogle Scholar
- 3.Paulsen IT, Seshadri R, Nelson KE, Eisen JA, Heidelberg JF, Read TD, Dodson RJ, Umayam L, Brinkac LM, Beanan MJ, Daugherty SC, Deboy RT, Durkin AS, Kolonay JF, Madupu R, Nelson WC, Ayodeji B, Kraul M, Shetty J, Malek J, Van Aken SE, Riedmuller S, Tettelin H, Gill SR, White O, Salzberg SL, Hoover DL, Lindler LE, Halling SM, Boyle SM, Fraser CM: The Brucella suis genome reveals fundamental similarities between animal and plant pathogens and symbionts. Proc Natl Acad Sci U S A. 2002, 99: 13148-13153. 10.1073/pnas.192319099.PubMedCentralCrossRefPubMedGoogle Scholar
- 4.Halling SM, Peterson-Burch BD, Bricker BJ, Zuerner RL, Qing Z, Li LL, Kapur V, Alt DP, Olsen SC: Completion of the genome sequence of Brucella abortus and comparison to the highly similar genomes of Brucella melitensis and Brucella suis. J Bacteriol. 2005, 187: 2715-2726. 10.1128/JB.187.8.2715-2726.2005.PubMedCentralCrossRefPubMedGoogle Scholar
- 8.Ouahrani S, Michaux S, Sri Widada J, Bourg G, Tournebize R, Ramuz M, Liautard JP: Identification and sequence analysis of IS6501, an insertion sequence in Brucella spp.: relationship between genomic structure and the number of IS6501 copies. J Gen Microbiol. 1993, 139 (12): 3265-3273.CrossRefPubMedGoogle Scholar
- 9.The IS Database. [http://www-is.biotoul.fr]
- 14.Vemulapalli R, McQuiston JR, Schurig GG, Sriranganathan N, Halling SM, Boyle SM: Identification of an IS711 element interrupting the wboA gene of Brucella abortus vaccine strain RB51 and a PCR assay to distinguish strain RB51 from other Brucella species and strains. Clin Diagn Lab Immunol. 1999, 6: 760-764.PubMedCentralPubMedGoogle Scholar
- 17.Godfroid F, Taminiau B, Danese I, Denoel P, Tibor A, Weynants V, Cloeckaert A, Godfroid J, Letesson JJ: Identification of the perosamine synthetase gene of Brucella melitensis 16M and involvement of lipopolysaccharide O side chain in Brucella survival in mice and in macrophages. Infect Immun. 1998, 66: 5485-5493.PubMedCentralPubMedGoogle Scholar
- 26.Sambrook J, Maniatis T, Fritsch EF: Molecular cloning : a laboratory manual. 1989, Cold Spring Harbor, N.Y., Cold Spring Harbor Laboratory, 3 v.-2ndGoogle Scholar
- 29.The Institute for Genomic Research. [http://www.tigr.org]
This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.