Abstract
The effects of cold rolling and the subsequent annealing were studied for the AISI 309Si stainless steel. During annealing of cold-rolled sheets, the hardness curve vs temperature showed two regimes of transformations (reversion and recrystallization), where the JMAK analysis revealed that the activation energy of both processes is equal to the lattice diffusion activation energy in austenitic stainless steel. Finally, based on the kinetics analysis, a recrystallization–temperature–time diagram for phase transformations was proposed.
References
C.C. Hsieh, D.Y. Lin, and T.C. Chang: Mater. Sci. Eng. A, 2008, vol. 475, pp. 128-35.
W. Ye, Y. Li, and F. Wang: Electrochim. Acta, 2006, vol. 51, pp. 4426-32.
R.L. Plaut, C. Herrera, D.M. Escriba, P.R. Rios, and A.F. Padilha: Mater. Res., 2007, vol. 10, pp. 453-60.
A. Paúl, R. Sanchez, O.M. Montes, and J.A. Odriozola: Oxid. Met., 2007, vol. 67, pp. 87-105.
S.N. Basu and G.J. Yurek: Oxid. Met., 1991, vol. 36, pp. 281-315.
K. Nohara, Y. Ono, and N. Ohashi: Tetsu To Hagane, 1977, vol. 63, pp. 772-82.
J.A. Lichtenfeld, C.J. Van Tyne, and M.C. Mataya: Metall. Mater. Trans. A, 2006, vol. 37, pp. 147-61.
W.B. Qin, J.S. Li, and Y.S. Li: Mater. Lett., 2019, vol. 254, pp. 116-9.
G. Sun, L. Du, J. Hu, B. Zhang, and R.D.K. Misra: Mater. Sci. Eng. A, 2019, vol. 746, pp. 341-55.
A. Amininejad, R. Jamaati, and S.J. Hosseinipour: Mater. Sci. Eng. A, 2019, vol. 767, pp. 138433.
S. Wang, K. Wei, J. Li, Y. Liu, Z. Huang, Q. Mao, and Y. Li: Mater. Lett., 2019, vol. 236, pp. 342-5.
A. Sarkar, S. Sanyal, T.K. Bandyopadhyay, and S. Mandal: Mater. Sci. Tech., 2019, vol. 35, pp. 2054-68.
K.D. Ralston and N. Birbilis: Corrosion, 2010, vol. 66, pp. 075005.
B. Fultz and J. Howe: Transmission electron microscopy and diffractometry of materials, 3rd ed., Springer, Berlin, 2008.
M. Naghizadeh and H. Mirzadeh: Metall. Mater. Trans. A, 2018, vol. 49, pp. 2248-56.
S. Kheiri, H. Mirzadeh, and M. Naghizadeh: Mater. Sci. Eng. A, 2019, vol. 759, pp. 90-6.
M. Naghizadeh, H. Mirzadeh, Metall. Mater. Trans. A, 2016, vol. 47, pp. 4210-6.
A. Kisko, A.S. Hamada, J. Talonen, D. Porter, and L.P. Karjalainen: Mater. Sci. Eng. A, 2016, vol. 657, pp. 359-70.
P. Behjati, A. Kermanpur, L.P. Karjalainen, A. Järvenpää, M. Jaskari, H. SamaeiBaghbadorani, A. Najafizadeh, and A. Hamada: Mater. Sci. Eng. A, 2016, vol. 650, pp. 119-28.
H.J. Frost and M.F. Ashby: Deformation-Mechanism maps: The Plasticity and Creep of Metals and Ceramics, Pergamon Press, Oxford, 1982.
H. Mirzadeh, J.M. Cabrera, and A. Najafizadeh: Acta Mater., 2011, vol. 59, pp. 6441-8.
H. Mirzadeh: Metall. Mater. Trans. A, 2015, vol. 46, pp. 4027-4037.
R. Ueji, N. Tsuji, Y. Minamino, and Y. Koizumi: Acta Mater., 2002, vol. 50, pp. 4177-89.
K. Tomimura, S. Takaki, and Y. Tokunaga: ISIJ Int., 1991, vol. 31, pp. 1431-1437.
J.W. Christian: The Theory of Transformations in Metals and Alloys, Part 1, 3rd ed., Pergamon Press, Oxford, 2002.
D. Hernández-Silva, R.D. Morales, and J.G. Cabañas-Moreno: ISIJ Int., 1992, vol. 32, pp. 1297-305.
M. Tavakoli, H. Mirzadeh, and M. Zamani: Mater. Sci. Tech., 2019, vol. 35, pp. 1932-41.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Manuscript submitted December 24, 2019.
Rights and permissions
About this article
Cite this article
Abdi, A., Mirzadeh, H., Sohrabi, M.J. et al. Phase Transformation Kinetics During Annealing of Cold-Rolled AISI 309Si Stainless Steel. Metall Mater Trans A 51, 1955–1959 (2020). https://doi.org/10.1007/s11661-020-05678-4
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-020-05678-4