Abstract
Additive manufacturing (AM), or often referred to as three-dimensional (3D) printing, is an important emerging research area which has received much attention recently. It allows 3D objects with arbitrary geometry to be printed automatically layer by layer from bottom to top. This technology offers several advantages compared to conventional manufacturing techniques including the capability of more flexible design, prototyping time and cost reduction, less human interaction, and faster product development cycle. 3D printing techniques have been applied in many different sectors including mechanical engineering, electrical engineering, biomedical engineering, art, architecture, and landscaping. This chapter reviews state-of-the-art 3D printed antennas from microwave to THz frequencies and offers practical and futuristic perspectives on the challenges and potentials of 3D printed antennas. An overview of various 3D printing techniques relevant to antenna applications is presented first. A number of 3D printed antenna examples categorized by different AM methods are then described. Finally, technical challenges and possible solutions of 3D printing technology specific to antenna application, as well as new and revolutionary antenna design/realization concepts enabled by 3D printing technology, are discussed.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Adams JJ, Duoss EB, Malkowski TF, Motala MJ, Ahn BY, Nuzzo RG, Bernhard JT, Lewis JA (2011) Conformal printing of electrically small antennas on three-dimensional surfaces. Adv Mater 23:1335–1340
Agarwala M, Bourell D, Beaman J, Marcus H, Barlow J (1995) Direct selective laser sintering of metals. Rapid Prototyp J 1(1):26–36
Ahmadloo M, Mousavi P (2013) A novel integrated dielectric-and-conductive ink 3D printing technique for fabrication of microwave devices. In: IEEE MTT-S international microwave symposium digest (IMS). Seattle, WA
Ahn J, Kim H, Lee K, Jeon S, Kang SJ, Sun Y, Nuzzo RG, Rogers JA (2006) Heterogeneous three-dimensional electronics by use of printed semiconductor nanomaterials. Science 314:1754–1757
Ahn D, Kwon S, Lee S (2008) Expression for surface roughness distribution of FDM processed parts. In: International conference on smart manufacturing application, KINTEX, Gyeonggi-do
Ahn BY, Duoss EB, Motala MJ, Guo X, Park S, Xiong Y, Yoon J, Nuzzo RG, Rogers JA, Lewis JA (2009) Omnidirectional printing of flexible, stretchable, and spanning silver microelectrodes. Science 323:1590–1593
Bak D (2003) Rapid prototyping or rapid production? 3D printing processes move industry towards the latter. Assem Autom 23(4):340–345
Chieh JS, Dick B, Loui S, Rockway JD (2014) Development of a Ku-Band corrugated conical horn using 3-D print technology. IEEE Antennas Wirel Propag Lett 13:201–204
Chu LJ (1948) Physical limitations of omni-directional antennas. J Appl Phys 19:1163
Cline HE, Anthony TR (1977) Heat treating and melting material with a scanning laser or electron beam. J Appl Phys 48:3895–3900
Garcia CR, Rumpf RC, Tsang HH, Barton JH (2013) Effects of extreme surface roughness on 3D printed horn antenna. Electron Lett 49(12):734–736
Gbele K, Liang M, Ng W, Gehm ME, Xin H (2014) Ka and Q band Luneburg lens antenna fabricated by polymer jetting rapid prototyping. Infrared, Millimeter, and Terahertz Waves (IRMMW-THz), Wollongong
Gebhardt A (2012) Understanding additive manufacturing. Hanser publications, Cincinnati
Griffin EA, McMillin S (1995) Selective laser sintering and fused deposition modeling processes for functional ceramic parts. In: Solid freeform fabrication symposium. University of Texas in Austin, Texas, vol 6, pp 25–30
http://www.nanoscribe.de/en/. Last date of accessed 24 Nov 2014
http://www.nscrypt.com/. Last date of accessed 24 Nov 2014
Huang Y, Gong X, Hajela S, Chappell WJ (2005) Layer-by-layer stereolithography of three-Dimensional antennas. In: IEEE Antennas and propagation society international symposium (APSURSI). Washington, DC, pp 276–279
Kambour RP (1973) A review of crazing and fracture in thermoplastics. J Polym Sci Macromol Rev 7(1):1–154
Kim OS (2013) 3D Printing electrically small spherical antennas. In: Antennas and propagation society international symposium (APSURSI). Orlando, Florida, pp 776–777
Kornbluh RD, Pelrine R, Pei Q, Oh S, Joseph J (2000) Ultrahigh strain response of field-actuated elastomeric polymers. In: SPIE’s 7th annual international symposium on smart structures and materials. Newport, pp 51–64
Kruth JP, Wang X, Laoui T, Froyen L (2003) Lasers and materials in selective laser sintering. Assem Autom 23(4):357–371
Kruth JP, Froyen L, Van Vaerenbergh J, Mercelis P, Rombouts M, Lauwers B (2004) Selective laser melting of iron-based powder. J Mater Process Technol 149:616–622
Kruth JP, Mercelis P, van Vaerenbergh J, Froyen L, Rombouts M (2005) Binding mechanisms in selective laser sintering and selective laser melting. Rapid Prototyp J 11(1):26–36
Liang M, Shemelya C, MacDonald E, Wicker R, Xin H (2014a) Fabrication of microwave patch antenna using additive manufacturing technique. In: IEEE antennas and propagation society international symposium (APSURSI). Memphis, Tennessee
Liang M, Ng W, Chang K, Gbele K, Gehm ME, Xin H (2014b) A 3-D Luneburg lens antenna fabricated by polymer jetting rapid prototyping. IEEE Trans Antennas Propag 62(4):1799–1807
Liang M, Yu X, Shemelya C, Roberson D, MacDonald E, Wicker R, Xin H (2014c) Electromagnetic materials of artificially controlled properties for 3D printing applications. In: IEEE antennas and propagation society international symposium (APSURSI). Memphis, Tennessee
Lipkea DW, Zhanga Y, Liua Y, Churcha BC, Sandhage KH (2010) Near net-shape/net-dimension ZrC/W-based composites with complex geometries via rapid prototyping and displacive compensation of porosity. J Eur Ceram Soc 30(11):2265–2277
Lopes AJ, MacDonald E, Wicker RB (2012) Integrating stereolithography and direct print technologies for 3D structural electronics fabrication. Rapid Prototyp J 18(2):129–143
Lopez AG, Lopez EEC, Chandra R, Johansson AJ (2013) Optimization and fabrication by 3d printing of a volcano smoke antenna for UWB applications. In: 7th European conference on antennas and propagation (EuCAP). Gothenburg, Sweden, pp 1471–1473
Luneburg RK (1964) Mathematical theory of optics. University of California Press, Los Angeles
Nayeri P, Liang M, Sabory-Garc´ıa RA, Tuo M, Yang F, Gehm M, Xin H, Elsherbeni AZ (2014) 3D Printed dielectric reflectarrays: low-cost high-gain antennas at sub-millimeter waves. IEEE Trans Antennas Propag 62(4):2000–2008
Salonen P, Kupiainen V, Tuohimaa M (2013) Direct printing of a handset antenna on a 3D surface. In: IEEE antennas and propagation society international symposium (APSURSI). Orlando, Florida, pp 504–505
Wong KV, Hernandez A (2012) A review of additive manufacturing. ISRN Mech Eng 2012, Article ID 208760
Wu Z, Liang M, Ng W, Gehm M, Xin H (2012) Terahertz Horn antenna based on hollow-core electromagnetic crystal (EMXT) structure. IEEE Trans Antennas Propag 60(12):5557–5563
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer Science+Business Media Singapore
About this entry
Cite this entry
Liang, M., Xin, H. (2016). Three-Dimensionally Printed/Additive Manufactured Antennas. In: Chen, Z., Liu, D., Nakano, H., Qing, X., Zwick, T. (eds) Handbook of Antenna Technologies. Springer, Singapore. https://doi.org/10.1007/978-981-4560-44-3_109
Download citation
DOI: https://doi.org/10.1007/978-981-4560-44-3_109
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-4560-43-6
Online ISBN: 978-981-4560-44-3
eBook Packages: EngineeringReference Module Computer Science and Engineering