Synonyms
Definition
Various standards define creep feed grinding as a peripheral grinding process with a relatively large depth of cut ae and accordingly low feed rate vf (ISO 3002-5 1989; VDI 3390 2014; VDI 3391 2016). Commonly, surface grinding is referred to as creep feed grinding when depth of cut ae ≥0.1 mm and a feed rate vf ≤3,000 mm/min are applied. In contrast, pendulum grinding can be characterized by varying ae and vf opposingly; hence, a relatively high feed rate vf and low depth of cut ae are applied. For a better understanding of creep feed grinding, comparisons will be drawn between both mentioned grinding strategies in the following.
Theory and Applications
Creep feed grinding is a special grinding strategy where considerable material removal rates and high surface qualities are attained along with quite low grinding wheel wear. It was applied in the early 1950s for the first time and lead to an extensive development of machines, grinding...
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Heisel U, Klocke F, Uhlmann E, Spur G (2014) Handbuch Spanen [Handbook Chip Removal], 2nd edn. Hanser, Munich. (in German)
ISO 3002-5 (1989) Grundgrößen beim Spanen und Schleifen, Teil 5: Grundbegriffe für Schleifverfahren mit Schleifscheiben [Basic quantities in cutting and grinding, Part 5: Basic terminology for grinding processes using grinding wheels]. Beuth, Berlin. (in English or French)
Klocke F, König W (2005) Fertigungsverfahren 2, Schleifen, Honen, Läppen [Production Methods 2: Grinding, Honing, Lapping], 4th edn. Springer, Berlin/Heidelberg. (in German)
Marinescu ID, Hitchiner M, Uhlmann E, Rowe WB, Inasaki I (2007) Handbook of machining with grinding wheels. CRC/Taylor & Francis Group, Boca Raton
Pearu TRA, Howes TD (1979) The application of continuous dressing in creep feed grinding. In: Proceedings of the 20th MTDR2, 1999
Saljé E (1984) Abrichten während des Schleifens, Grundlagen, Leistungssteigerungen, Wirtschaftlichkeit [Dressing during the grinding process, basics, increase in performance, efficiency]. 4. Feinbearfbeitungskolloquium, Braunschweig. (in German)
Tawakoli T (1990) Hochleistungs-Flachschleifen, Technologie, Verfahrensplanung und wirtschaftlicher Einsatz [High performance creep feed grinding, technology, process planning and economical use]. VDI-Verlag GmbH, Düsseldorf. (in German)
Tio TH (1990) Pendelplanschleifen nichtoxidischer Keramiken [Pendulum grinding of non-oxide ceramics]. Dissertation, Technical University of Berlin. (Produktionstechnik – Berlin 80) Hanser Fachbuchverlag, Munich (in German)
Uhlig U, Redeker W, Bleich R (1982) Profilschleifen mit kontinuierlichem Abrichten [Profile grinding with continuous dressing]. Werkstatttechnik 72(6):313–317. (in German)
Uhlmann EG (1994) Tiefschleifen hochfester keramischer Werkstoffe [Creep feed grinding of high-strength ceramics]. Dissertation, Technical University of Berlin. Hanser (Productionstechnik – Berlin 129) Fachbuchverlag, Munich. (in German)
VDI 3390 (2014) Tiefschleifen [Creep feed grinding]. Beuth, Berlin. (in English or German)
VDI 3391 (2016) Pendel-Planschleifen und Pendel-Profilschleifen mit Umfangsschleifscheiben [Pendulum surface and pendulum profile grinding with peripheral grinding wheels]. Beuth, Berlin. (in English or German)
Werner G, Tawakoli T (1988) Fortschritte beim HEDG-Verfahren mit CBN-Schleifscheiben [Progress in high efficiency deep grinding (HEDG) with cubic boron nitride]. Ind Diamanten Rundsch 22(1):17–24. (in German)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Section Editor information
Rights and permissions
Copyright information
© 2019 CIRP
About this entry
Cite this entry
Uhlmann, E. (2019). Creep Feed Grinding. In: Chatti, S., Laperrière, L., Reinhart, G., Tolio, T. (eds) CIRP Encyclopedia of Production Engineering. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-53120-4_16714
Download citation
DOI: https://doi.org/10.1007/978-3-662-53120-4_16714
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-662-53119-8
Online ISBN: 978-3-662-53120-4
eBook Packages: EngineeringReference Module Computer Science and Engineering