CIRP Encyclopedia of Production Engineering

Living Edition
| Editors: Sami Chatti (Editor-in-Chief), Luc Laperrière (Editor-in-Chief), Gunther Reinhart (Editor-in-Chief), Tullio Tolio (Editor-in-Chief), The International Academy for Production

Machinability of Carbon-Fiber-Reinforced and GLARE Materials

Living reference work entry
DOI: https://doi.org/10.1007/978-3-642-35950-7_6701-3

Synonyms

Definition

Materials

Carbon-fiber-reinforced plastic (CFRP) is a multiphase material consistent of the carbon fibers which are embedded into the polymeric matrix material. The third phase of the material is the interface which describes the zone between the fibers and the matrix material. CFRP is known by its excellent mechanical properties and the anisotropic material behavior.

GLARE (glass-fiber-reinforced aluminum) is a composite material consisting of thin aluminum and glass-fiber-reinforced plastic (GFRP) layers.

Machinability

The machining process is used to separate the material, e.g., to generate a certain shape or geometry of the workpiece and to improve the surface quality. The machining of CFRP or composites is often difficult because of the inhomogeneous and anisotropic material properties.

Theory and Application

Introduction

Because of their excellent weight-specific properties,...

This is a preview of subscription content, log in to check access

References

  1. Bhatnagar N, Ramakrishnan N, Naik N, Komanduri R (1995) On the machining of fiber reinforced plastic (FRP) composite laminates. Int J Mach Tools Manuf 35(5):701–716CrossRefGoogle Scholar
  2. Brinksmeier E, Fangmann S, Rentsch R (2011) Drilling of composites and resulting surface integrity. CIRP Ann Manuf Technol 60(1):57–60CrossRefGoogle Scholar
  3. Chang C-S (2006) Turning of glass-fiber reinforced plastics materials with chamfered main cutting edge carbide tools. J Mater Process Technol 180(1–3):117–129CrossRefGoogle Scholar
  4. Davim JP, Reis P (2005) Damage and dimensional precision on milling carbon fiber-reinforced plastics using design experiments. J Mater Proc Technol 160(2):160–167CrossRefGoogle Scholar
  5. Ferreira JR, Coppini NL, Miranda GWA (1999) Machining optimisation in carbon fibre reinforced composite materials. J Mater Process Technol 92–93:135–140CrossRefGoogle Scholar
  6. Kaneeda T (1989) CFRP cutting mechanism. In: Proceeding of the 16th North American manufacturing research conference of the SME 15/3, Champaign, pp 216–221Google Scholar
  7. Klocke F, König W, Rummenhöller S, Würtz C (1999) Milling of advanced composites, Chapter 8. In: Jahanmir S, Ramulu M, Koshy P (eds) Machining of ceramics and composites. Marcel Dekker, New York, pp 249–265Google Scholar
  8. Koplev A, Lystrup A, Vorm T (1983) The cutting process, chips and cutting forces in machining CFRP. Composites 14(4):371–376CrossRefGoogle Scholar
  9. Pecat O, Brinksmeier E (2014a) Low damage drilling of CFRP/titanium compound materials for fastening. Procedia CIRP 13:1–7CrossRefGoogle Scholar
  10. Pecat O, Brinksmeier E (2014b) Tool wear analyses in low frequency vibration assisted drilling of CFRP/Ti6Al4V stack material. Procedia CIRP 14:142–147CrossRefGoogle Scholar
  11. Schulze V, Becke C, Pabst R (2011) Specific machining forces and resultant force vectors for machining of reinforced plastics. CIRP Ann Manuf Technol 60(1):69–72CrossRefGoogle Scholar
  12. Teti R (2002) Machining of composite materials. CIRP Ann Manuf Technol 51(2):611–634CrossRefGoogle Scholar

Copyright information

© CIRP 2018

Authors and Affiliations

  1. 1.University of Bremen, IWTBremenGermany

Section editors and affiliations

  • Garret O'Donnell
    • 1
  1. 1.Trinity College DublinDublinIreland