Synonyms
Definition
Cold roll-forming is a major forming process for the mass production of a variety of complex profiles from a wide spectrum of materials and thicknesses. According to Chryssolouris (2005) and Lange (1985), roll-forming process is classified into the category of sheet metal forming by bending with rotary tool motion. The plastic deformation of a solid body is achieved by means of a bending load. The metal strip enters into the roll-forming mill, in a precut or coil form, and it is gradually formed through consecutive contoured rolls into complex shapes (Fig. 1). Three-dimensional deformations of the material include transversal bending and other additive redundant deformations.
References
Alvarez W (2006) Roll form tool design. Industrial Press, New York
Chryssolouris G (2005) Manufacturing systems: theory and practice, 2nd edn. Springer, Heidelberg
Halmos GT (2006) Roll-forming handbook. CRC Press, Boca Raton
Lange K (1985) Handbook of metal forming. McGraw-Hill, New York
Panton SM, Duncan JL, Zhu SD (1996) Longitudinal and shear strain development in cold roll-forming. J Mater Process Technol 60:219–224
Paralikas J, Salonitis K, Chryssolouris G (2009) Investigation of the effects of main roll-forming process parameters on quality for a V-section profile from AHSS. Int J Adv Manuf Technol 44:223–237
Paralikas J, Salonitis K, Chryssolouris G (2010) Optimization of roll-forming process parameters – a semi-empirical approach. Int J Adv Manuf Technol 47:1041–1052. https://doi.org/10.1007/s00170-009-2252-z
Paralikas J, Salonitis K, Chryssolouris G (2011) Investigation of the effect of roll-forming pass design on main redundant deformations on profiles from AHSS. Int J Adv Manuf Technol 56:475–491
Paralikas J, Salonitis K, Chryssolouris G (2013a) Energy efficiency of cold roll-forming process. Int J Adv Manuf Technol 66:1271–1284
Paralikas J, Salonitis K, Chryssolouris G (2013b) Robust optimization of the energy efficiency of the cold roll-forming process. Int J Adv Manuf Technol 69:461–481
Wick C, Benedict J, Veilleux RF (1984) Tool and manufacturing engineers handbook, 2nd edn. Forming. Society of Manufacturing Engineers (SME), Dearborn
Yan Y, Wang H, Li Q, Qian B, Mpofu K (2014) Simulation and experimental verification of flexible roll-forming of steel sheets. Int J Adv Manuf Technol 72:209–220
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Section Editor information
Rights and permissions
Copyright information
© 2018 CIRP
About this entry
Cite this entry
Salonitis, K., Paralikas, J., Chryssolouris, G. (2018). Roll-Forming. In: Int. Academy for Production Engineering, Chatti, S., Tolio, T. (eds) CIRP Encyclopedia of Production Engineering. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-35950-7_6514-3
Download citation
DOI: https://doi.org/10.1007/978-3-642-35950-7_6514-3
Received:
Accepted:
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-35950-7
Online ISBN: 978-3-642-35950-7
eBook Packages: Springer Reference EngineeringReference Module Computer Science and Engineering