Abstract
In all bonded assemblies, the durability of the adhesive or sealant joint is important to the integrity of the article concerned. The considerations of joint design, adhesive, sealant and substrate selection, surface preparation, and primer selection along with methods of application including mixing procedures, application techniques, and joint assembly are all reviewed. Methods of evaluation of durability and test regimes including exposure to elevated and reduced temperatures, UV radiation, moisture, saline solutions, stress, and fatigue, both individually and combined in cycles, are considered. The relevance and application of these test condition to specific situations are discussed, including the role of antioxidants and cross-linking additives to improve durability. Reference is made to the corresponding standards according to the major standard organizations, such as the International Standards Organization (ISO), the European Committee for Standardization (CEN), and the British Standards Institute (BSI), and also to European directives and regulations and national legislation.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Adams RD, Comyn J, Wake WC (1997) Structural adhesive joints in engineering, 2nd edn. Chapman & Hall, London
Approved Document to support Regulation 7 – Material and workmanship (1999) (H.M.S.O)
Ashcroft IA, Digby RP, Shaw SJ (2001) J Adhes 75:175
BASA (1999) Guide to the ISO 11600 classification of sealants for building construction
BASA (2008) Industry guide to the professional application of construction sealants on site
BS 3046 (1981) Specification for adhesives for hanging flexible wallcoverings
BS EN ISO 11431 (2002) Building construction. Jointing products. Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass
Critchlow GW (2005) In: Packham DE (ed) Handbook of adhesion, 2nd edn. Chichester, Wiley
Dillard DA (2005) In: Packham DE (ed) Handbook of adhesion, 2nd edn. Chichester, Wiley
EN 12004 (2007) Adhesives for tiles. Requirements, evaluation of conformity, classification and designation
EN 12228 (2002) Surfaces for sports areas – determination of joint strength of synthetic surfaces
EN 1279 parts 1 to 6 (2002 to 2008) Glass in building. Insulating glass units
EN 13744 (2004) Surfaces for sports areas – procedure for accelerated aging by immersion in hot water
EN 14256 (2007) Adhesives for non-structural wood applications – test method and requirements for resistance to static load
EN 14814 (2007) Adhesives for thermoplastic piping systems for fluids under pressure. Specifications
EN 1903 (2008) Adhesives – test method for adhesives for plastic or rubber floor coverings or wall coverings – determination of dimensional changes after accelerated ageing
EN 204 (2001) Classification of thermoplastic wood adhesives for non-structural applications
EN 205 (2003) Adhesives. Wood adhesives for non-structural applications. Determination of tensile shear strength of lap joints
European Commission, Guidance Paper F (2004) Durability and the construction products directive
FprEN 15651 parts 1 to 5 (2009) Sealants for non-structural use in joints in buildings and pedestrian walkways
Ishikawa H, Seto K, Shimotuma S, Kishi N, Sato C (2005) Int J Adhes Adhes 25:193
ISO 11600 (2003) Building construction. Jointing products. Classification and requirements for sealants
ISO 15908 (2002) Adhesives for thermoplastic piping systems. Test method for the determination of thermal stability of adhesives
ISO 9142 (2003) Adhesives – guide to the selection of standard laboratory ageing conditions for testing bonded joints
IUPAC (1997) Compendium of chemical terminology, 2nd edn
Licari JJ, Swanson DW (2005) Adhesive technology for electronic applications. William Andrew, Norwich
Lowe GB, Lee TCP, Comyn J, Huddersman K (1994) Int J Adhes Adhes 14:85
Petrie EM (2004) Antioxidants for adhesives – web publication by SpecialChem
Petrie EM (ed) (2007) Handbook of adhesives and sealants, 2nd edn. New York, McGraw-Hill
Scott G (1998) Stabilisation of adhesives against environmental peroxidation – Society for Adhesion and Adhesives. One day meeting on ‘Stability of Adhesives’
Zhao ZY, Zhang WL (1997) Int J Adhes Adhes 17:47
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG, part of Springer Nature
About this entry
Cite this entry
Palmer, J.D. (2018). Durability of Nonstructural Adhesives. In: da Silva, L., Öchsner, A., Adams, R. (eds) Handbook of Adhesion Technology. Springer, Cham. https://doi.org/10.1007/978-3-319-55411-2_35
Download citation
DOI: https://doi.org/10.1007/978-3-319-55411-2_35
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-55410-5
Online ISBN: 978-3-319-55411-2
eBook Packages: EngineeringReference Module Computer Science and Engineering