Skip to main content
SpringerLink
Log in

Construction Materials Reinforced with Natural Products

  • Living reference work entry
  • First Online:
Handbook of Ecomaterials

Abstract

Increasing environmental awareness leads to further research and investigation for new eco-friendly materials. The need for green and renewable materials has never been as prevalent as it currently is and undoubtedly there is increasing interest in materials demonstrating efficient use of renewable resources. Due to the challenges of petroleum-based products and the need to find renewable solutions, more and more companies are looking at natural fiber composite materials. The primary driving forces for new natural-composite materials are the decreased cost of natural fibers, weight reduction, recycling, and the desire for green products. Natural fibers are getting attention from researchers and academicians to utilize in composites mostly due to their eco-friendly nature and sustainability, since they can be sourced from plants or animals. A major goal of natural fiber composites is to alleviate the need to use expensive fibers, which has a relatively high density and is dependent on nonrenewable sources. Another benefit may also include the easy usage/handling of fibers due to their flexibility, because the problem arises when high percentage of fibers is to be used as in case of steel fibers. However, the main disadvantages of natural fibers in composites are the poor compatibility between fiber and matrix and the relative high moisture sorption. Therefore, chemical treatments are considered in modifying the fiber surface properties. The use of natural fibers in the construction sector, as reinforcement of composites (such as cement paste, mortar, and/or concrete), are economical for increasing their certain properties, such as tensile strength, shear strength, toughness, and energy absorption capacity. For all these, natural fibers need to be properly tested and results should be published in a systematic manner with further investigation for using the specific natural fibers as composite construction materials.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution

Institutional subscriptions

References

  1. Fan M, Fu F (2017) Introduction: a perspective natural fibre composites in construction. In: Advanced high strength natural fibre composites in construction. Woodhead publishing series. Elsevier, U.K.

    Google Scholar 

  2. Ali M (2012) Natural fibres as construction materials. J Civil Eng Constr Technol 3(3):80–89

    Google Scholar 

  3. Bledzki AK, Gassan J (1999) Composites reinforced with cellulose based fibres. Prog Polym Sci 24(2):221–274

    Article  Google Scholar 

  4. Faruk O, Bledzki AK, Fink HP, Sain M (2014) Progress report on natural fiber reinforced composites. Macromol Mater Eng 299:9

    Article  Google Scholar 

  5. Domke VDM, Vishnu P (2015) Natural fiber reinforced building materials. IOSR J Mech Civil Eng (IOSR-JMCE) 12(3):104–107

    Google Scholar 

  6. Bledzki AK, Faruk O, Sperber VE (2006) Cars from bio-fibres. Macromol Mater Eng 291:449–457

    Article  Google Scholar 

  7. Ramakrishna G, Sundararajan T (2005) Studies on the durability of natural fibres and the effect of corroded fibres on the strength of mortar. Cem Concr Compos 27(5):575–582

    Article  Google Scholar 

  8. Saheb DN, Jog JP (1999) Natural fiber polymer composites: a review. Adv Polym Technol 18(4):351–363

    Article  Google Scholar 

  9. Mothé CG, Araujo CRD (2004) Thermal and mechanical characterization of polyuretane composites with curaua fibers. Polímeros 14(4):274–278

    Article  Google Scholar 

  10. Silva RV (2003) Composite based on polyurethane resin derived from castor oil and vegetable fibers. Doctoral dissertation, University of São Paulo

    Google Scholar 

  11. Satyanarayana KG, Arizaga GGC, Wypych F (2009) Biodegradable composites based on lignocellulosic fibers – an overview. Prog Polym Sci 34(9):982–1021

    Article  Google Scholar 

  12. Mohanty AK, Misra M, Hinrichsen G (2000) Biofibres, biodegradable polymers and biocomposites: an overview. Macromol Mater Eng 276(1):1–24

    Article  Google Scholar 

  13. Riedel U, Nickel J (1999) Natural fibre-reinforced biopolymers as construction materials –new discoveries. Angew Makromol Chem 272:34–40

    Article  Google Scholar 

  14. Goda K, Sreekala MS, Gomes A, Kaji T, Ohgi J (2006) Improvement of plant based natural fibers for toughening green composites – effect of load application during mercerization of ramie fibers. Compos A: Appl Sci Manuf 37(12):2213–2220

    Article  Google Scholar 

  15. Dan-Mallam Y, Abdullah MZ, MegatYusoff PSM (2012) Predicting the tensile properties of woven kenaf/polyethylene terephthalate (PET) fiber reinforced polyoxymethylene (POM) hybrid laminate composite. Int Organ Sci Res J Mech Civ Eng 2(3):6–13

    Google Scholar 

  16. Paul A, Joseph K, Thomas S (1997) Effect of surface treatments on the electrical properties of low-density polyethylene composites reinforced with short sisal fibers. Compos Sci Technol 57(1):67–79

    Article  Google Scholar 

  17. Summerscales J, Dissanayake NPJ, Virk AS, Hall W (2010) A review of bast fibres and their composites. Part 1. Fibres as reinforcements. Compos A: Appl Sci Manuf 41(10):1329–1335

    Article  Google Scholar 

  18. Petinakis E, Yu L, Simon G, Dean K (2013) Natural fibre bio-composites incorporating poly (lactic acid). In: Masuelli M (ed) Fiber reinforced polymers – the technology applied for concrete repair. Intech Open Science, pp 42–59

    Google Scholar 

  19. Kalia S, Dufresne A, Cherian BM, Kaith BS, Avérous L, Njuguna J, Nassiopoulos E (2011) Cellulose-based bio-and nanocomposites: a review. Int J Polym Sci 2011:1–35

    Google Scholar 

  20. Wambua P, Ivens J, Verpoest I (2003) Natural fibres: can they replace glass in fibre reinforced plastics? Compos Sci Technol 63(9):1259–1264

    Article  Google Scholar 

  21. Mohanty AK, Misra M, Drzal LT (eds) (2005) Natural fibers, biopolymers, and biocomposites. Taylor & Francis, Boca Raton

    Google Scholar 

  22. Sedan D, Pagnoux C, Smith A, Chotard T (2008) Mechanical properties of hemp fibre reinforced cement: influence of the fibre/matrix interaction. J Eur Ceram Soc 28(1):183–192

    Article  Google Scholar 

  23. Bledzki AK, Jaszkiewicz A, Scherzer D (2009) Mechanical properties of PLA composites with man-made cellulose and abaca fibres. Compos A: Appl Sci Manuf 40(4):404–412

    Article  Google Scholar 

  24. Bledzki AK, Mamun AA, Jaszkiewicz A, Erdmann K (2010) Polypropylene composites with enzyme modified abaca fibre. Compos Sci Technol 70(5):854–860

    Article  Google Scholar 

  25. Heijenrath R, Peijs T (1996) Natural-fibre-mat-reinforced thermoplastic composites based on flax fibres and polypropylene. Adv Compos Lett 5:81–86

    Google Scholar 

  26. Roe PJ, Ansell MP (1985) Jute-reinforced polyester composites. J Mater Sci 20(11):4015–4020

    Article  Google Scholar 

  27. Shivnand HK, Inamdar PS, Sapthagiri G (2010, November) Evaluation of tensile and flexural properties of hemp and polypropylene based natural fiber composites. Paper presented at the 2010 2nd international conference of chemical, biological and environmental engineering

    Google Scholar 

  28. Joseph PV, Joseph K, Thomas S (1999) Effect of processing variables on the mechanical properties of sisal-fiber-reinforced polypropylene composites. Compos Sci Technol 59(11): 1625–1640

    Article  Google Scholar 

  29. Devi LU, Bhagawan SS, Thomas S (1997) Mechanical properties of pineapple leaf fiber-reinforced polyester composites. J Appl Polym Sci 64(9):1739–1748

    Article  Google Scholar 

  30. http://textilelearner.blogspot.in/2012/03/features-oa-jute-fiber-properties-of.html

  31. http://www.sisal.ws/page6/page7/page7.html

  32. Sapuan SM, Yusoff NB (2015) The relationship between manufacturing and design for manufacturing in product development of natural fibre composites. Book chapter. In: Salit MS, Jawaid M, Yusoff NB, Enamul Hoque M (eds) Manufacturing of natural fibre reinforced polymer composites. Springer, Cham. ISBN: 978-3-319-07943-1 (Print) 978-3-319-07944-8 (Online)

    Google Scholar 

  33. Ku H, Wang H, Pattarachaiyakoop N, Trada M (2011) A review on the tensile properties of natural fiber reinforced polymer composites. Compos Part B 42(4):856–873

    Article  Google Scholar 

  34. Shalwan A, Yousif BF (2013) In state of art: mechanical and tribological behaviour of polymeric composites based on natural fibres. Mater Des 48:14–24

    Article  Google Scholar 

  35. Sassoni E, Manzi S, Motori A, Montecchi M, Canti M (2014) Novel sustainable hemp-based composites for application in the building industry: physical, thermal and mechanical characterization. Energ Buildings 77:219–226

    Article  Google Scholar 

  36. Shinoj S, Visvanathan R, Panigrahi S (2010) Towards industrial utilization of oil palm fibre: physical and dielectric characterization of linear low density polyethylene composites and comparison with other fibre sources. Biosyst Eng 106(4):378–388

    Article  Google Scholar 

  37. Gallo E, Schartel B, Acierno D, Cimino F, Russo P (2013) Tailoring the flame retardant and mechanical performances of natural fiber-reinforced biopolymer by multi-component laminate. Compos Part B 44(1):112–119

    Article  Google Scholar 

  38. Azwa ZN, Yousif BF, Manalo AC, Karunasena W (2013) A review on the degradability of polymeric composites based on natural fibres. Mater Des 47:424–442

    Article  Google Scholar 

  39. Uddin N (2013) Developments in fiber-reinforced polymer (FRP) composites for civil engineering. Woodhead Publishing. Elsevier, U.K.

    Google Scholar 

  40. Yan LB, Chouw N (2013) Crashworthiness characteristics of flax fibre reinforced epoxy tubes for energy absorption application. Mater Des 51:629–640

    Article  Google Scholar 

  41. Yan LB (2012) Effect of alkali treatment on vibration characteristics and mechanical properties of natural fabric reinforced composites. J Reinf Plast Compos 31(13):887–896

    Article  Google Scholar 

  42. Yan LB, Chouw N, Yuan XW (2012) Improving the mechanical properties of natural fibre fabric reinforced epoxy composites by alkali treatment. J Reinf Plast Compos 36(6):435–437

    Google Scholar 

  43. Balaguru PN, Shah SP (1992) Fiber-reinforced cement composites. McGraw-Hill, New York

    Google Scholar 

  44. Li Z, Wang L, Wang X (2006) Flexural characteristics of coir fibre reinforced cementitious composites. Fibers Polym 7(3):286–294

    Article  Google Scholar 

  45. Hasan NMS, Sobuz HR, Sayed MS, Islam SM (2012) The use of coconut fibre in the production of structural lightweight concrete. J Appl Sci 12(9):831–839

    Article  Google Scholar 

  46. Azeredo H (2009) Nanocomposites for food packaging applications. Food Res Int 42(9): 1240–1253

    Article  Google Scholar 

  47. Corradi S, Isidori T, Corradi M, Soleri F (2009) Composite boat hulls with bamboo natural fibres. Int J Mater Prod Technol 36(1):73–89

    Article  Google Scholar 

  48. Youssef AM, El-Samahy MA, Rehim MHA (2012) Preparation of conductive paper composites based on natural cellulosic fibers for packaging applications. Carbohydr Polym 89(4): 1027–1032

    Article  Google Scholar 

  49. Uddin N, Kalyankar RR (2011) Manufacturing and structural feasibility of natural fiber reinforced polymeric structural insulated panels for panelized construction. Int J Polym Sci 2011:Article 963549

    Article  Google Scholar 

  50. Alvarez-Valencia D, Dagher HJ, Lopez-Anido RA, Davids WG, Gardner DJ, Center AC (2009) Behavior of natural-fiber/thermoplastic sheet piling. Presented at ACMA-composites and polycon conference, 15–17 Jan 2009, Tampa

    Google Scholar 

  51. Drzal L, Mohanty A, Burgueno R, Misra M (2004) Biobased structural composite materials for housing and infrastructure applications: opportunities and challenges. In: Proceedings of the NSF housing research agenda workshop, 12–14 Feb, Orlando, pp 129–140

    Google Scholar 

  52. Asasutjarit C, Hirunlabh J, Khedari J, Charoenvai S, Zeghmati B et al (2007) Development of coconut coir-based lightweight cement board. Constr Build Mater 21(2):277–288

    Article  Google Scholar 

  53. Ali M, Briet R, Chouw N (2013) Dynamic response of mortar-free interlocking structures. Constr Build Mater 42:168–189

    Article  Google Scholar 

  54. Cook DJ, Pama RP, Weerasingle HLSD (1978) Coir fibre reinforced cement as a low cost roofing material. Build Environ 13:193–198

    Article  Google Scholar 

  55. Luisito J. Peþamora, Neil J. Melencion and RolendioN (2005). http://www.ecocoboard.net/dwnloads/Presentations%20workshop/Penamora_Coconut%20fibre%20cement%20boards.pdf (November 02, 2009)

Download references

Author information

Authors and Affiliations

  1. Department of Civil Engineering, Faculty of Engineering and Natural Sciences, Bahcesehir University, Istanbul, Turkey

    Irem Sanal

  2. Department of Mechanical Engineering, Graphic Era Hill University, Dehradun, Uttarakhand, India

    Deepak Verma

Authors
  1. Irem Sanal
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Deepak Verma
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Deepak Verma .

Editor information

Editors and Affiliations

  1. Instituto de Ingeniería Civil, Universidad Autónoma de Nuevo León Instituto de Ingeniería Civil, San Nicolás de los Garza, Nuevo León, Mexico

    Leticia Myriam Torres Martínez

  2. Universidad Autónoma de Nuevo León , Monterrey, Mexico

    Oxana Vasilievna Kharissova

  3. Universidad Autónoma de Nuevo León , Monterrey, Mexico

    Boris Ildusovich Kharisov

Rights and permissions

Reprints and permissions

Copyright information

© 2018 Springer International Publishing AG

About this entry

Check for updates. Verify currency and authenticity via CrossMark

Cite this entry

Sanal, I., Verma, D. (2018). Construction Materials Reinforced with Natural Products. In: Martínez, L., Kharissova, O., Kharisov, B. (eds) Handbook of Ecomaterials. Springer, Cham. https://doi.org/10.1007/978-3-319-48281-1_75-1

Download citation

  • DOI: https://doi.org/10.1007/978-3-319-48281-1_75-1

  • Received:

  • Accepted:

  • Published:

  • Publisher Name: Springer, Cham

  • Print ISBN: 978-3-319-48281-1

  • Online ISBN: 978-3-319-48281-1

  • eBook Packages: Springer Reference EngineeringReference Module Computer Science and Engineering

Publish with us

Policies and ethics

Search

Navigation