Abstract
Since raw materials for adhesives influence the performance of final adhesive products, the selection, storage, handling, and testing of the raw materials are very important. In this chapter, types of raw materials including basic resins, hardeners, fillers, and functional additives for adhesives are firstly described. In addition, the roles of the materials are also shown. Practices for the quality control of the raw materials consisting of acceptance inspections and testing are also explained. Other tests conducted when adhesive products are shipped are explained too. These tests should be carried out following test standards. The standards for testing raw materials, and standards for materials are also mentioned in this chapter.
References
Akita S et al (2001) Appl Phys Lett 79:1691
Crivello JV, Sasaki H (1993a) J Macromol Sci Pure Appl Chem A30:173
Crivello JV, Sasaki H (1993b) J Macromol Sci Pure Appl Chem A30:189
Deming WE (2000) Out of the crisis. The MIT Press, Cambridge (reprinted version) 88
Fan S et al (1999) Science 283:512
Iijima S (1991) Nature 354:56
Nakayama Y (2002) Ultramicroscopy 91:49
Noda N (2005) Adhes Technol Jpn 25:29
Ozawa M (1987) TQC and management, Japan Standards Association, p 116
Saito Y (2003) J Nanosci Nanotechnol 3:39
Sasaki H (2000) J Photopolym Sci Technol 13:119
Sasaki H, Crivello JV (1992) J Macromol Sci Pure Appl Chem A29:915
Sasaki H, Rudzinski JM et al (1995) J Polym Sci A 33:1807
Skeist I (1990) Handbook of adhesives, 3rd edn. Springer, New York, p 13
The Ministry of the Environment (1996) Government of Japan, Air pollution control law No. 32
Tozaki I (2006) Adhes Technol Jpn 26:52
Tutui S (2006) Adhes Technol Jpn 26:25
Yanagisawa S (2007) Adhes Technol Jpn 27:26
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this entry
Cite this entry
Wakabayashi, K. (2017). Quality Control of Raw Materials. In: da Silva, L., Öchsner, A., Adams, R. (eds) Handbook of Adhesion Technology. Springer, Cham. https://doi.org/10.1007/978-3-319-42087-5_40-2
Download citation
DOI: https://doi.org/10.1007/978-3-319-42087-5_40-2
Received:
Accepted:
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-42087-5
Online ISBN: 978-3-319-42087-5
eBook Packages: Springer Reference EngineeringReference Module Computer Science and Engineering