Abstract
Design methods of adhesively bonded joints subjected to impact loading are discussed in this chapter. Methodologies to treat the dynamic responses of structures are shown. In these cases, it is necessary to analyze the stress distribution considering stress wave propagation because inertia effects of the structures are more significant than those in quasi static conditions. Constitutive relations of materials are discussed. The relations are highly dependent to the stress and strain rates. Thus, the dependence should be considered for the dynamic analysis of materials. Some examples of stress analysis are shown, where closed-form approaches and dynamic finite element analyses are explained. In addition, an actual application, a crash problem of car structures, is explained because adhesively bonded joints have been recently introduced to car structures and the design of the joints subjected to impact loads has become very important.
References
Adams RD, Peppiatt NA (1974) Stress analysis of adhesive-bonded lap joints. J Strain Anal 9:185
Akiba H, Ohyama T et al (2006) Large scale drop impact analysis of mobile phone using ADVC on blue gene/L. Proceedings of SC06, Tampa, pp 1–26
Belingardi G, Goglio L et al (2005) Impact behaviour of bonded built-up beams: experimental results. Int J Adhes Adhes 25:173
Cowper GR, Symonds PS (1952) Brown Univ Div of Appl Math, Report 28
Fay PA, Suthurst GD (1990) Redesign of adhesively bonded box beam sections for improved impact performance. Int J Adhes Adhes 10:128
Goglio L, Peroni L et al (2008) High strain-rate compression and tension behaviour of an epoxy bi-component adhesive. Int J Adhes Adhes 28:329
Goldsmith W (2001) Impact, the theory and physical behaviour of colliding solids. Dover, New York, p 25
Harris JA, Adams RD (1985) An assessment of the impact performance of bonded joints for use in high energy absorbing structures. Proc Inst Mech Eng 199:121
Hattori T, Sakata S et al (1988) A stress singularity parameter approach for evaluating adhesive strength. JSME Int J Ser 1 31:718
Higuchi I, Sawa T et al (2002a) Three-dimensional finite element analysis of single-lap adhesive joints subjected to impact bending moments. J Adhes Sci Technol 16:1327
Higuchi I, Sawa T et al (2002b) Three-dimensional finite element analysis of single-lap adhesive joints under impact loads. J Adhes Sci Technol 16:1585
Higuchi I, Sawa T et al (2003) Three-dimensional finite element analysis of stress response in adhesive butt joints subjected to impact bending moments. J Adhes 79:1017
Johnson GR, Cook WH (1983) A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. In: Proceedings of 7th symposium on ballistics 541, The Hague, pp 541–547
Johnson W, Mellor PB (1973) Engineering plasticity. Van Nostrand Reinhold 54, London
Marzi S, Ramon-Villalonga L et al (2008) Usage of cohesive elements in crash analysis of large, bonded vehicle structures – experimental tests and simulation. In: Proceedings of German LS-DYNA forum, Bamberg, pp B.I.1–B.I.19
Marzi S, Hesebeck O et al (2009a) A rate-dependent cohesive zone model for adhesively bonded joints loaded in mode I. J Adhes Sci Technol 23:881
Marzi S, Hesebeck O et al (2009b) An end-loaded shear joint (ELSJ) specimen to measure the critical energy release rate in mode II of tough, structural adhesive joints. J Adhes Sci Technol 23:1883
Marzi S, Hesebeck O et al (2009c) A rate-dependent, elasto-plastic cohesive zone mixed-mode model for crash analysis of adhesively bonded joints. In: Proceedings of the 7th European LS-DYNA conference, Salzburg
Mayer MA (1990) Dynamic behavior of materials. Wiley, Hoboken, p 210
von Mises R (1913) Mechanik der festen korper im plastisch deformablen zustand. Göttin Nachr Math Phys 1:582
Nossek M, Marzi S (2009) Cohesive zone modeling for adhesives. In: Hiermaier S (ed) Predictive modeling of dynamic processes: a tribute to klaus thoma. Springer, New York, pp 89–105
Parks DM (1977) The virtual crack extension method for nonlinear material behavior. Comput Methods Appl Mech Eng 12:353
Sato C (2008) Impact. In: da Silva LFM, Öchsner A (eds) Modeling of adhesively bonded joints. Springer, Berlin, p 279
Sato C (2009) Dynamic stress responses at the edges of adhesive layers in lap strap joints of half-infinite length subjected to impact loads. Int J Adhes Adhes 29:670
Sato C, Ikegami K (1999) Strength of adhesively-bonded butt joints of tubes subjected to combined high-rate loads. J Adhes 70:57
Sato C, Ikegami K (2000) Dynamic deformation of lap joints and scarf joints under impact loads. Int J Adhes Adhes 20:17
Sawa T, Senoo Y et al (1996) Interface stress response of laminated plates subjected to static and impact loads. J Adhes 59:1
Sawa T, Higuchi I et al (2002) FEM stress analysis and strength of adhesive butt joints of similar hollow cylinders under static and impact tensile loadings. J Adhes Sci Technol 16:1449
Sawa T, Suzuki Y et al (2003a) Stress analysis and strength estimation of butt adhesive joints of dissimilar hollow cylinders under impact tensile loadings. J Adhes Sci Technol 17:943
Sawa T, Higuchi I et al (2003b) Three-dimensional finite element stress analysis of single-lap adhesive joints of dissimilar adherends subjected to impact tensile loads. J Adhes Sci Technol 17:2157
Tresca HE (1869) Memoire sur l’ecoulement des corps solides. Mém Presentés par divers savants 20:733
Vaidya UK, Gautam ARS et al (2006) Experimental–numerical studies of transverse impact response of adhesively bonded lap joints in composite structures. Int J Adhes Adhes 26:184
Volkersen O (1938) Die nietkraftverteilung in zugbeanspruchten nietverbindungen mit konstanten laschen querschnitten. Luftfahrtforschung 15:41
Zienkiewicz OC (1971) The finite element method in engineering science, 2nd edn. McGraw Hill, London, p 16
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this entry
Cite this entry
Sato, C. (2017). Design for Impact Loads. In: da Silva, L., Öchsner, A., Adams, R. (eds) Handbook of Adhesion Technology. Springer, Cham. https://doi.org/10.1007/978-3-319-42087-5_29-2
Download citation
DOI: https://doi.org/10.1007/978-3-319-42087-5_29-2
Received:
Accepted:
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-42087-5
Online ISBN: 978-3-319-42087-5
eBook Packages: Springer Reference EngineeringReference Module Computer Science and Engineering