Encyclopedia of Engineering Geology

Living Edition
| Editors: Peter Bobrowsky, Brian Marker

Ground Pressure

Living reference work entry
DOI: https://doi.org/10.1007/978-3-319-12127-7_211-1

Definition

Pressure exerted vertically or laterally on, and within, the ground.

Overburden pressure is the load caused by overlying materials on the ground causing an effective vertical stress in the ground. Effective lateral ground pressure is the horizontal effective pressure in the ground. The lateral ground pressure can be neutral, active, or passive. Virgin ground pressure is the ground pressure before any activity in a new project is undertaken also called “virgin pressure ,” “virgin stress field ,” or “virgin stress configuration .” “Active ground pressure” is the minimum possible pressure exerted on an object by the ground, while “passive ground pressure” is the maximum possible pressure caused by an object on the surrounding ground.

Ground materials are diverse and may be gases, fluids, solids (i.e., minerals, grains, and aggregates of grains or minerals), and any mixture of these and also include man-made ground, such as fills and waste dump materials. Ground is commonly...

This is a preview of subscription content, log in to check access

References

  1. Bieniawski ZT (1984) The design process in rock engineering. Rock Mech Rock Eng 17(3):183–190CrossRefGoogle Scholar
  2. Brown ET, Hoek E (1978) Trends in relationships between measured in-situ stresses and depth. Int J Rock Mech Min 15(4):211–215CrossRefGoogle Scholar
  3. Heidbach O, Rajabi M, Reiter K, Ziegler M (2016) World stress map 2016. GFZ Data Services. http://dataservices.gfz-potsdam.de/wsm/showshort.php?id=escidoc:1680899. Accessed 19 Nov 2017
  4. Jaky J (1948) Pressure in silos. In: 2nd international conference on soil mechanics and foundation engineering (ICSMFE), Rotterdam, 21–30 June 1948. pp 103–107Google Scholar
  5. Jang IS, Chung C-K, Kim MM, Cho SM (2003) Numerical assessment on the consolidation characteristics of clays from strain holding, self-boring pressuremeter test. Comput Geotech 30(2):121–140CrossRefGoogle Scholar
  6. Lee MF, Mollison LJ, Mikula P, Pascoe M (2006) In situ rock stress measurements in Western Australia’s Yilgarn craton. In: Lu M, Li CC, Kjørholt H, Dahle H (eds) In-situ rock stress measurement, interpretation and application, Trondheim, Norway, 19–21 June 2006. Taylor & Francis/Balkema, Leiden, pp 35–42Google Scholar
  7. Lopez A (1999) Neo- and paleostress partitioning in the SW corner of the Caribbean plate and its fault reactivation potential. Universität Tübingen, TübingenGoogle Scholar
  8. Verruijt A (2012) Soil mechanics. Delft University of Technology, DelftGoogle Scholar

Copyright information

© Springer International Publishing AG 2018

Authors and Affiliations

  1. 1.Engineering Geology, ESA, Faculty of Geo-Information Science and Earth Observation (ITC)University of TwenteEnschedeThe Netherlands