Abstract
This chapter focuses on a methodological comparison of the energy consumption of passenger cars with conventional internal combustion engine and new electric powertrains.
The scientific methodology of the presented knowledge relies on simulation models validated by real-world tank-to-wheel emission and energy measurements performed in urban and extra urban areas as well as on freeways.
Furthermore, an overview of the recent development of energy storage systems, energy converters, and powertrains in developed regions is given.
Based on a statistically average European passenger car, fuel and energy consumption of conventional diesel, gasoline hybrid, fuel cell, and battery electric powertrains are compared. Special focus is given to the real-world energy consumption of the vehicles. This means auxiliary power units of the car such as onboard electronics, safety systems, heating, and air conditioning have significant influence on the fuel consumption, especially in driving conditions with lower speeds.
The results show that for typical real-world operational conditions during the seasons of a whole year the hybrid vehicle and, with some limitations in the range of operation, fuel cell vehicle are comparable to the usability of a conventional vehicle. Battery electric vehicles (BEV) have very limited range.
For the consistent comparison of propulsion systems with such different energy carriers, like liquid fuels, gaseous hydrogen, and electric power, the energy consumption with respect to primary energy supply was carried out. Based on this approach, the distance related energy consumption of hybrid and fuel cell vehicles is somewhat favorable compared to the conventional vehicle. Battery electric vehicles consume significantly more energy due to inefficiencies in power production and transmission as well as charging and discharging losses.
Nevertheless, cars with fuel cell and battery electric propulsion systems have the considerable benefit of local emissions-free driving.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Cachón L, Pucher E (2007) Fuel consumption simulation model of a CNG vehicle based on real-world emission measurement. SAE Technical Paper Series, Paper-Nr. 2007-24-0114
Guzzella L, Sciarretta A (2005) Vehicle propulsion systems, introduction to modeling and optimization. Springer, Berlin/Heidelberg. ISBN 3-540-25195-2
Jeong KS, Lee WY, Kim CS (2005) Energy management strategies of a fuel cell/battery hybrid system using fuzzy logics. J Power Sour 145:319–326. doi:10.1016/j.jpowsour.2005.01.076, Elsevier 2005
Liu J, Peng H, Filipi Z (2005) Modeling and analysis of the Toyota hybrid system. In: Proceedings of the IEEE/ASME international conference on advanced intelligent mechatronics, Monterey, California. IEEE-Paper 0-7803-9046-6
Nitsche CH, Weiss W, Fosmoe R, Schroedl S, Pucher E (2005) Predictive maintenance and diagnostic concept for a worldwide fuel cell vehicle fleet. In: Proceedings of the 21st Worldwide battery, hybrid and fuel cell electric vehicel Symposium, Monte. Paper-Nr. FFP298, 16S
Paces M (2007) Simulation der streckenbezogenen CO2-Emissionen eines Hybridfahrzeugs auf Basis von Real-World Messungen, Vienna University of Technology
Pucher E, Tóth D, Cachón L, Weissenberger D (2008a) Real World Emission measurement of conventional and hybrid light duty vehicles with increased bio fuel blends. In: FISITA 2008 World Automotive Congress, Munich. F2008-09-039
Pucher E, Tóth D, Cachón L, Raetzsch T, Weissenberger D (2008b) Real World and chassis dynamometer emission measurement of a turbocharged gasoline vehicle with increased bio fuel blend. SAE Technical Paper Series, Paper-Nr. 2008-0-1768, Shanghai
Sekanina A, Pucher E, Gruber K, Kronberger H (2007) Fuel Cell vehicle efficiency optimization by advanced fuel cell design and drive train simulation, SAE Technical Paper Series, Paper-Nr. 2007-24-0072
Shen ZJ, Chen X, Masrur A, Garg VK, Soltis A (2005) Optimal power management and distribution in automotive systems. In: Emadi A (ed) Handbook of automotive power electronics and motor drives. Taylor and Francis, Baco Raton, Chapter 5
Simic D, Pucher E (2009) Saving potential of HDV auxiliaries energy consumption determined by entire vehicle simulation. In: Proceedings of the vehicle power and propulsion conference, Lille, VPPC ‘09. IEEE, 2009, ISBN: 978-1-4244-2600-3; S. 785–S. 789
van Basshuysen R, Schäfer F (2004) Internal Combustion Engine, SAE International, ISBN 0-7680-1139-6
Acknowledgments
We would like to thank in particular Dr. James Girard for reviewing this contribution.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2012 Springer-Verlag London Ltd.
About this entry
Cite this entry
Pucher, E., Cachón, L., Hable, W. (2012). Energy and Powertrain Systems in Intelligent Automobiles. In: Eskandarian, A. (eds) Handbook of Intelligent Vehicles. Springer, London. https://doi.org/10.1007/978-0-85729-085-4_12
Download citation
DOI: https://doi.org/10.1007/978-0-85729-085-4_12
Publisher Name: Springer, London
Print ISBN: 978-0-85729-084-7
Online ISBN: 978-0-85729-085-4
eBook Packages: EngineeringReference Module Computer Science and Engineering