Synonyms
Definition
The minimum distance separating two parallel planes between which the surface can be contained.
Theory and Application
Scale of Flatness
Although in theory there is no minimum or maximum, in engineering practice we take as minimum size the field of view of a microscope, even an STM type, and as a maximum the size of large telescope mirrors or very large surface plates. This means that sizes where flatness is relevant can range between a few nm2 and a few m2.
A flatness deviation is a geometrical error, where this error is determined, implicitly or explicitly, for surface wavelengths from a minimum value, while all longer wavelengths that define the geometrical deviation are not filtered. This implies that the bandwidth can be rather small when flatness is assessed over a course grid. For example, for a square grid, this implies that surface wavelengths smaller than twice the pitch are neglected and are assumed...
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Creath K, Wyant JC (1990) Absolute measurement of surface roughness. Appl Opt 29:3823–3827
Debenham M, Dew GD (1980) Determination gravitational deformation of an optical flat by liquid surface interferometry. Precis Eng 2:93–97
Drescher J (2003) Analytical estimation of measurement uncertainty in surface plate calibration by the Moody method using differential levels. Precis Eng 27:323–332
Evans CJ, Davies AD (2013) Certification, self-calibration and uncertainty in optical surface testing. Int J Precision Technol 3(4):388–402
Evans CJ, Kestner RN (1996) Test optics error removal. Appl Opt 35:1015–1021
Evans CJ, Tyler Estler W (1996) Self-calibration: reversal, redundancy, error separation, and ‘Absolute Testing’. Ann CIRP 45(2):617–634
Evans CJ, Parks PE, Sullivan PJ, Taylor JS (1995) Visualization of surface figure by the use of Zernike polynomials. Appl Opt 34:7815–7819
Geckeler RD, Weingärtner I (2002) Sub-nm topography measurement of large flats: an ultra-precise flatness standard for semiconductor industry. Proc SPIE 4779:1–12
Geckeler RD, Just A, Probst R, Weingärtner I (2002) Sub-nm-Topographiemessung mit hochgenauen Autokollimatoren [Sub-nm topography measurements with highly accurate autocollimators]. Tech Mess 69:535–541 (in German)
Grzanna J, Schultz G (1990) Absolute testing of flatness standards at square grid points. Opt Commun 77:107–112
Haitjema H (1992) Uncertainty propagation in surface plate measurements. In: Proceedings of the 4th international symposium on dimensional metrology in production and quality control. ISMQC, Tampere, pp 304–320
Haitjema H, Meijer J (1993) Evaluation of surface plate flatness measurements. Eur J Mech Eng 38:165–172
ISO 1011 (2012) GPS geometrical tolerancing – tolerances of form, orientation, location and run-out. ISO, Geneva
ISO 12781-1 (2011) GPS-flatness-part 1: vocabulary and parameters of flatness. ISO, Geneva
Meijer J (1989) From straightness to flatness: about surface plate measurement. Thesis, Twente University
Meijer J, de Bruijn W (1981) Determination of flatness from straightness measurements and characterization of the surface by four parameters. Precis Eng 3:17–22
Moody JC (1955) How to calibrate surface plates in the plant. Tool Eng 1955:85–91
Powell I, Goulet E (1998) Absolute figure measurements with a liquid-flat reference. Appl Opt 37:2579
Zernike, F (1934) Beugungstheorie des Schneidenverfahrens und seine verbesserten Form, der Phasenkontrastmethode. [Diffraction theory of the knife-edge test and its improved form, the phase-contrast method] Physica 1 :689–704 (in German)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Section Editor information
Rights and permissions
Copyright information
© 2019 CIRP
About this entry
Cite this entry
Haitjema, H. (2019). Flatness. In: Chatti, S., Laperrière, L., Reinhart, G., Tolio, T. (eds) CIRP Encyclopedia of Production Engineering. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-53120-4_16794
Download citation
DOI: https://doi.org/10.1007/978-3-662-53120-4_16794
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-662-53119-8
Online ISBN: 978-3-662-53120-4
eBook Packages: EngineeringReference Module Computer Science and Engineering