Encyclopedia of Earthquake Engineering

2015 Edition
| Editors: Michael Beer, Ioannis A. Kougioumtzoglou, Edoardo Patelli, Siu-Kui Au

Seismic Analysis of Steel–Concrete Composite Buildings: Numerical Modeling

  • Konstantinos Daniel TsavdaridisEmail author
Reference work entry
DOI: https://doi.org/10.1007/978-3-642-35344-4_125

Synonyms

Concrete-encased steel sections; Connections; Constitutive models; Cyclic behavior; Damping; Frames; Hysteretic rules; Nonlinear; Numerical modeling; Panel zones; Seismic analysis; Steel–concrete composite; T-stub components

Introduction

Steel–Concrete Composite (SCC) Systems

Composite construction includes a wide range of structural systems, e.g., framed structures employing all steel–concrete composite (SCC) members and components (e.g., composite beam-to-columns and connections) and sub-assemblages of steel and/or reinforced concrete (RC) elements. Such components and elements are employed to optimize the resistance and deformation capacity (Uchida and Tohki 1997). SCC structures have been used extensively in recent years because of benefits in combining the two construction materials. SCC structures are also known for their excellent earthquake performance owing to their high strength, high ductility, and large energy absorption. Their good structural damping properties...

This is a preview of subscription content, log in to check access.

References

  1. Aribert JM, Al Bitar A (1989) Optimisation du dimensionnement en connection partielle de poutres de planchers mixtes réalisés avec un bac de tôle mince nervurée (Optimization of the dimensioning in the case of partial connection of beams of composite floors carried out with a thin ribbed sheet vat). Construction Métallique 4 (1989) 12, pp 4–33Google Scholar
  2. Aribert J-M, Lachal A (2000) Cyclic behaviour of the shear connection component in composite joints. In: Behaviour of steel structures in seismic area. Proceedings of STESSA 2000 conference, Montreal, Canada. Balkema, Rotterdam, pp 105–112Google Scholar
  3. Balan TA, Filippou FC, Popov EP (1997) Constitutive model for 3D cyclic analysis of concrete structures. J Eng Mech 123(2):143–153CrossRefGoogle Scholar
  4. Ballio G, Calado L, Iori I, Mirabella Roberti G (1987) I problemi delle grandi costruzioni in zona sismica. Associazione Italiana Cemento Armato e Precompresso, Roma, pp 31–44Google Scholar
  5. Braconi A, Salvatore W, Tremblay R, Bursi OS (2007) Behaviour and modeling of partial-strength beam-to-column composite joints for seismic applications. Earthq Eng Struct Dyn 36:142–161CrossRefGoogle Scholar
  6. Castro JM, Elghazouli AY, Izzuddin BA (2005) Modelling of the panel zone in steel and composite moment frames. Eng Struct 27(1):129–144CrossRefGoogle Scholar
  7. Cotsovos DM, Kotsovos MD (2011) Constitutive modelling of concrete behaviour. In: Papadrakakis M, Fragiadakis M, Lagaros ND (eds) Computational methods in earthquake engineering, Computational methods in applied sciences. Springer, Netherlands, pp 147–175CrossRefGoogle Scholar
  8. Fabbrocino G, Manfredi G, Cosenza E (2002) Modelling of continuous steel-concrete composite beams: computational aspects. Comput Struct 80(27–30):2241–2251CrossRefGoogle Scholar
  9. Kim DK, Engelhardt MD (2005) Composite beam element for nonlinear seismic analysis of steel frames. J Struct Eng 131:715–724CrossRefGoogle Scholar
  10. Krawinkler H (1978) Shear in beam-column joints in seismic design of steel frames. Eng J 15(3):82–91Google Scholar
  11. Lee SJ (1987) Seismic behavior of steel building structures with composite slabs. PhD thesis, Dept. of Civil Engineering, Lehigh Univ., BethlehemGoogle Scholar
  12. Menegotto M, Pinto PE (1973) Method of analysis for cyclically loaded R.C. plane elements including changes in geometry and non-elastic behaviour of elements under combined normal force and bending. In: IABSE, Report of the working commissions, Band 13, symposium on resistance and ultimate deformability of structures acted on by well defined repeated loads, LisbonGoogle Scholar
  13. Newmark NM, Siess CP, Viest IM (1951) Tests and analyses of composite beams with incomplete interaction. Proc Soc Exp Stress Anal 9(1):75–92Google Scholar
  14. Ollgaard JG, Slutter RG, Fisher JW (1971) Shear strength of stud connectors in lightweight and normal-weight concrete. AISC Eng J 8(2):55–64Google Scholar
  15. Park R, Paulay T (1975) Reinforced concrete structures. Wiley, New YorkCrossRefGoogle Scholar
  16. Piluso V, Faella C, Rizzano G (2001) Ultimate behavior of bolted T-stubs I: theoretical model. J Struct Eng 127(6):686–693CrossRefGoogle Scholar
  17. Przemieniecki JS (1968) Theory of matrix structural analysis. McGraw-Hill, New YorkzbMATHGoogle Scholar
  18. Stevens NJ, Uzumeri SM, Collins MP, Will GT (1991) Constitutive model for reinforced concrete finite element analysis. ACI Struct J 88(1):49–59Google Scholar
  19. Thai HT, Kim SE (2011) Nonlinear inelastic analysis of concrete-filled steel tubular frames. J Construct Steel Res 67:1797–1805CrossRefGoogle Scholar
  20. Uchida N, Tohki H (1997) Design of high-rise building using round tubular steel composite columns. In: IABSE international conference on composite construction conventional and innovative, Innsbruck, 16–18 Sept 1997Google Scholar
  21. Zhao H, Yuan Y, Ye Y (2012) Simplified nonlinear simulation of steel-concrete composite beams. J Construct Steel Res 71:83–91CrossRefGoogle Scholar
  22. Zona A, Barbato M, Conte JP (2008) Nonlinear seismic response analysis of steel-concrete composite frames. ASCE J Struct Eng 123(6):986CrossRefGoogle Scholar

Copyright information

© Springer-Verlag Berlin Heidelberg 2015

Authors and Affiliations

  1. 1.School of Civil EngineeringUniversity of LeedsLeedsUK