Definition
Rock field tests as discussed here do not refer to tests performed with portable devices that can be used in the field such as the Schmidt hammer or the point load test device. Rock field tests only refer to tests that have to be performed on the ground surface, underground openings, and boreholes to characterize deformability and in situ stress. The following is a summary of International Society for Rock Mechanics (ISRM)-suggested methods for rock field tests (Ulusay and Hudson 2007).
Introduction
Designing subsurface or on-surface civil engineering structures requires a sound knowledge of rock mass deformability and in situ stress of rock mass. Both deformability and in situstress are controlled by discontinuities in rock and tectonic (paleo or active) stress at the site of proposed construction. Therefore, it is necessary to devise field-testing methods that can be performed inside underground openings, inside boreholes, and on the ground surface. Deformability of a...
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Coulson J (1979) Suggested methods for determining in situ deformability of rock. Int J Rock Mech Min Sci 16(3):195–214
Haimson B, Cornet F (2003) ISRM suggested methods for rock stress estimation—part 3: hydraulic fracturing (HF) and/or hydraulic testing of pre-existing fractures (HTPF). Int J Rock Mech Min Sci 40(7):1011–1020
Kim K, Franklin J (1987) Suggested methods for rock stress determination. Int J Rock Mech Min Sci Geomech Abstr 24(1):53–73
Ladanyi B (1987) Suggested methods for deformability determination using a flexible dilatometer. Int J Rock Mech Min Sci 24(2):123–134
Loureiro-Pinto J (1986) Suggested method for deformability determination using a large flat jack technique. Int J Rock Mech Min Sci Geomech Abstr 23(2):133–140
Sjöberg J, Christiansson R, Hudson J (2003) ISRM suggested methods for rock stress estimation—part 2: overcoring methods. Int J Rock Mech Min Sci 40(7):999–1010
Sugawara K, Obara Y (1999) Draft ISRM suggested method for in situ stress measurement using the compact conical-ended borehole overcoring (CCBO) technique. Int J Rock Mech Min Sci 36(3):307–322
Ulusay R, Hudson J (2007) The complete ISRM suggested methods for rock characterization, testing and monitoring: 1974–2006. International Society for Rock Mechanics, Commission on Testing Methods, ISRM Turkish National Group, Ankara
Yow J (1996) Suggested method for deformability determination using a stiff dilatometer. Int J Rock Mech Min Sci Geomech Abstr 23(2):13
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG, part of Springer Nature
About this entry
Cite this entry
Admassu, Y. (2018). Rock Field Tests. In: Bobrowsky, P.T., Marker, B. (eds) Encyclopedia of Engineering Geology. Encyclopedia of Earth Sciences Series. Springer, Cham. https://doi.org/10.1007/978-3-319-73568-9_242
Download citation
DOI: https://doi.org/10.1007/978-3-319-73568-9_242
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-73566-5
Online ISBN: 978-3-319-73568-9
eBook Packages: Earth and Environmental ScienceReference Module Physical and Materials ScienceReference Module Earth and Environmental Sciences