Advertisement

Catalytic Upgrading of Bio-oil for Production of Drop-In Fuels

  • Maryam Takht RavanchiEmail author
  • Saeed Sahebdelfar
Reference work entry

Abstract

The depletion of fossil fuel reserves together with CO2 emission concerns have promoted worldwide search foralternative renewable and sustainable feedstocks for the production of chemicals and fuels. Lignocellulosicbiomass has good potentials because of its abundance and relatively low cost. The chemical conversion ofbiomass to commodity products involves steps mostly passing through an intermediate known as bio-oil, which isequivalent to crude oil. However, it could not be processed in the same way as petroleum, mostly due to thecorrosively and low stability problems associated with its high oxygen content. Nevertheless, the topic is ofconsiderable interest with a large amount of research underway. Catalysis will play an important role for futuredevelopments with both conventional and novel catalysts are being extensively studied. The results showed thatsignificant modifications are necessary to achieve the desirable catalytic performance. Co-processing of bio-oiland/or its derivatives in conventional refineries will positively influence the viability of the emerging technologies.

References

  1. 1.
    Martin-Luengo MA, Yates M, Diaz M, Saez Rojo E, Gonzalez Gil L (2011) Renewable fine chemicals from rice and citric subproducts: ecomaterials. Appl Catal B Environ 106:488–493CrossRefGoogle Scholar
  2. 2.
    Takht Ravanchi M, Sahebdelfar S (2014) Carbon dioxide capture and utilization in petrochemical industry: potentials and challenges. Appl Petrochem Res 4:63–77CrossRefGoogle Scholar
  3. 3.
    Takht Ravanchi M, Sahebdelfar S, Tahriri Zangeneh F (2011) Carbon dioxide sequestration in petrochemical industries with the aim of reduction in greenhouse gas emissions. Front Chem Sci Eng 5:173–178CrossRefGoogle Scholar
  4. 4.
    Faba L, Díaz E, Ordóñez S (2015) Recent developments on the catalytic technologies for the transformation of biomass into biofuels: a patent survey. Renew Sustain Energy Rev 51:273–287CrossRefGoogle Scholar
  5. 5.
    Perego C, Bosetti A (2011) Biomass to fuels: the role of zeolite and mesoporous materials. Microporous Mesoporous Mater 144:28–39CrossRefGoogle Scholar
  6. 6.
    Abnisa F, Wan Daud WMA (2014) A review on co-pyrolysis of biomass: an optional technique to obtain a high-grade pyrolysis oil. Energy Convers Manag 87:71–85CrossRefGoogle Scholar
  7. 7.
    White JE, Catallo WJ, Legendre BL (2011) Biomass pyrolysis kinetics: a comparative critical review with relevant agricultural residue case studies. J Anal Appl Pyrolysis 91:1–33CrossRefGoogle Scholar
  8. 8.
    Demirbas A (2009) Biorefineries: current activities and future developments. Energy Convers Manag 50:2782–2801CrossRefGoogle Scholar
  9. 9.
    Chen M (2013) Hydrodeoxygenation of bio-oil model compounds on supported noble metal catalysts. PhD Dissretation, The University of SydneyGoogle Scholar
  10. 10.
    Alonso DM, Bond JQ, Dumesic JA (2010) Catalytic conversion of biomass to biofuels. Green Chem 12:1493–1513CrossRefGoogle Scholar
  11. 11.
    Czernik S, Bridgwater AV (2004) Overview of applications of biomass fast pyrolysis oil. Energy Fuel 18:590–598CrossRefGoogle Scholar
  12. 12.
    Cheng YT, Huber GW (2012) Production of targeted aromatics by using Diels-Alder classes of reactions with furans and olefins over ZSM-5. Green Chem 14:3114–3125CrossRefGoogle Scholar
  13. 13.
    Mullen CA, Boateng AA, Goldberg NM, Lima IM, Laird DA, Hicks KB (2010) Bio-oil and bio-char production from corn cobs and stover by fast pyrolysis. Biomass Bioenergy 34:67–74CrossRefGoogle Scholar
  14. 14.
    Akhtar J, Amin NAS (2012) A review on operating parameters for optimum liquid oil yield in biomass pyrolysis. Renew Sustain Energy Rev 16:5101–5109CrossRefGoogle Scholar
  15. 15.
    Li J, Li X, Zhou G, Wang W, Wang C, Komarneni S, Wang Y (2014) Catalytic fast pyrolysis of biomass with mesoporous ZSM-5 zeolites prepared by desilication with NaOH solutions. Appl Catal A Gen 470:115–122CrossRefGoogle Scholar
  16. 16.
    Onal E, Uzun BB, Putun AE (2014) Bio-oil production via co-pyrolysis of almond shell as biomass and high density polyethylene. Energy Convers Manag 78:704–710CrossRefGoogle Scholar
  17. 17.
    Czernik S, Evans R, French R (2007) Hydrogen from biomass-production by steam reforming of biomass pyrolysis oil. Catal Today 129:265–268CrossRefGoogle Scholar
  18. 18.
    Fatih Demirbas M (2009) Biorefineries for biofuel upgrading: a critical review. Appl Energy 86:S151–S161CrossRefGoogle Scholar
  19. 19.
    Luo Z, Wang S, Cen K (2005) A model of wood flash pyrolysis in fluidized bed reactor. Renew Energy 30:377–392CrossRefGoogle Scholar
  20. 20.
    Isahak WNRW, Hisha MWM, Yarmo MA, Hin TY (2012) A review on bio-oil production from biomass by using pyrolysis method. Renew Sustain Energy Rev 16:5910–5923CrossRefGoogle Scholar
  21. 21.
    Huber GW, Iborra S, Corma A (2006) Synthesis of transportation fuels from biomass: chemistry, catalysts, and engineering. Chem Rev 106:4044–4098CrossRefGoogle Scholar
  22. 22.
    Sahebdelfar S (2017) Steam reforming of propionic acid: thermodynamic analysis of a model compound for hydrogen production from bio-oil. Int J Hydrogen Energy 42:16386–16395CrossRefGoogle Scholar
  23. 23.
    Mortensen PM, Grunwaldt J-D, Jensen PA, Knudsen KG, Jensen AD (2011) A review of catalytic upgrading of bio-oil to engine fuels. Appl Catal A Gen 407:1–19CrossRefGoogle Scholar
  24. 24.
    Bridgwater AV (2012) Review of fast pyrolysis of biomass and product upgrading. Biomass Bioenergy 38:68–94CrossRefGoogle Scholar
  25. 25.
    Nummisalo V (2012, December). Standardisation of fast pyrolysis bio-oil under CEN. IEA Bioenergy Task 34 Newsletter. Retrieved from http://www.pyne.co.uk/Resources/user/PyNe%20Issue%2032%20%20-%20December%202012%20-%20website.pdf
  26. 26.
    Liu S, Chen M, Chu L, Yang Z, Zhu C, Wang J, Chen M (2013) Catalytic steam reforming of bio-oil aqueous fraction for hydrogen production over NieMo supported on modified sepiolite catalysts. Int J Hydrogen Energy 38:3948–3955CrossRefGoogle Scholar
  27. 27.
    Bridgwater AV, Grassi G (1991) Biomass pyrolysis liquids upgrading and utilization. Springer, Netherlands.Google Scholar
  28. 28.
    Butler E, Devlin G, Meier D, McDonnell K (2011) A review of recent laboratory research and commercial developments in fast pyrolysis and upgrading. Renew Sustain Energy Rev 15:4171–4186CrossRefGoogle Scholar
  29. 29.
    Sahebdelfar S, Takht Ravanchi M (2017) Deoxygenation of propionic acid: thermodynamic equilibrium analysis of upgrading a bio-oil model compound. Renew Energy 114:1113–1122CrossRefGoogle Scholar
  30. 30.
    Bartholomew CH, Farrauto RJ (2006) Fundamentals of industrial catalytic processes. Wiley Interscience, Hoboken, pp 635–704Google Scholar
  31. 31.
    Wildschut J, Mahfud FH, Venderbosch RH, Heeres HJ (2009) Hydrotreatment of fast pyrolysis oil using heterogeneous noble-metal catalysts. Ind Eng Chem Res 48:10324–10334CrossRefGoogle Scholar
  32. 32.
    Furimsky E (2000) Catalytic hydrodeoxygenation. Appl Catal A Gen 199:147–190CrossRefGoogle Scholar
  33. 33.
    Ren H, Yu W, Salciccioli M, Chen Y, Huang Y, Xiong K, Vlachos DG, Chen JG (2013) Selective hydrodeoxygenation of biomass-derived oxygenates to unsaturated hydrocarbons using molybdenum carbide catalysts. ChemSusChem 6:798–801CrossRefGoogle Scholar
  34. 34.
    Tøpsøe H, Clausen BS, Massoth FE (1996) Hydrotreating catalysts: science and technology. Springer, BerlinGoogle Scholar
  35. 35.
    Popov A, Kondratieva E, Goupil JM, Mariey L, Bazin P, Gilson JP, Travert A, Mauge F (2010) Bio-oils hydrodeoxygenation: adsorption of phenolic molecules on oxidic catalyst supports. J Phys Chem C 114:15661–15670CrossRefGoogle Scholar
  36. 36.
    Iino A, Cho A, Takagaki A, Kikuchi R, Ted Oyama S (2014) Kinetic studies of hydrodeoxygenation of 2-methyltetrahydrofuran on a Ni2P/SiO2 catalyst at medium pressure. J Catal 311:17–27CrossRefGoogle Scholar
  37. 37.
    Itthibenchapong V, Ratanatawanate C, Oura M, Faungnawakij K (2015) A facile and low-cost synthesis of MoS2 for hydrodeoxygenation of phenol. Catal Commun 68:31–35CrossRefGoogle Scholar
  38. 38.
    Niquille-Röthlisberger A, Prins R (2006) Hydrodesulfurization of 4,6-dimethyldibenzothiophene and dibenzothiophene over alumina-supported Pt, Pd, and Pt-Pd catalysts. J Catal 242:207–216CrossRefGoogle Scholar
  39. 39.
    Wildschut J (2009) Pyrolysis oil upgrading to transportation fuels by catalytic hydrotreatment. PhD thesis, Rijksuniversiteit GroningenGoogle Scholar
  40. 40.
    Fisk CA, Morgan T, Ji Y, Crocker M, Crofcheck C, Lewis SA (2009) Bio-oil upgrading over platinum catalysts using in situ generated hydrogen. Appl Catal A Gen 358:150–156CrossRefGoogle Scholar
  41. 41.
    Yakovlev VA, Khromova SA, Sherstyuk OV, Dundich VO, Ermakov DY, Novopashina VM, Lebedev MY, Bulavchenko O, Parmon VN (2009) Development of new catalytic systems for upgraded bio-fuels production from bio-crude-oil and biodiesel. Catal Today 144:362–366CrossRefGoogle Scholar
  42. 42.
    Guo Q, Wu M, Wang K, Zhang L, Xu X (2015) Catalytic hydrodeoxygenation of algae bio-oil over bimetallic Ni-Cu/ZrO2 catalysts. Ind Eng Chem Res 54:890–899CrossRefGoogle Scholar
  43. 43.
    Dickinson JG, Savage PE (2014) Development of Ni-Cu catalysts for aqueous-phase hydrodeoxygenation. ACS Catal 4:2605–2615CrossRefGoogle Scholar
  44. 44.
    Ardiyanti AR, Khromova SA, Venderbosch RH, Yakovlev VA, Melián-Cabrera IV, Heeres HJ (2012) Catalytic hydrotreatment of fast pyrolysis oil using bimetallic Ni-Cu catalysts on various supports. Appl Catal A Gen 449:121–130CrossRefGoogle Scholar
  45. 45.
    Moon JS, Kim EG, Lee YK (2014) Active sites of Ni2P/SiO2 catalyst for hydrodeoxygenation of guaiacol: a joint XAFS and DFT study. J Catal 311:144–152CrossRefGoogle Scholar
  46. 46.
    Oyama ST (2008) Transition metal carbides, nitrides, and phosphides. In: Ertl G, Knözinger H, Weitkamp J (eds) Handbook of heterogeneous catalysis, vol 2. Wiley-VCH, Weinheim, pp 342–356Google Scholar
  47. 47.
    Mortensen PM, de Carvalho HWP, Grunwaldt JD, Jensen PA, Jensen AD (2015) Activity and stability of Mo2C/ZrO2 as catalyst for hydrodeoxygenation of mixtures of phenol and 1-octanol. J Catal 328:208–215CrossRefGoogle Scholar
  48. 48.
    Furimsky E (2003) Metal carbides and nitrides as potential catalysts for hydro-processing. Appl Catal A Gen 240:1–28CrossRefGoogle Scholar
  49. 49.
    Boullosa-Eiras S, Lødeng R, Bergem H, Stöcker M, Hannevold L, Blekkan EA (2014) Catalytic hydrodeoxygenation (HDO) of phenol over supported molybdenum carbide, nitride, phosphide and oxide catalysts. Catal Today 223:44–53CrossRefGoogle Scholar
  50. 50.
    Guo C (2015) Novel carbon-supported transition metal phosphide catalysts for hydrodeoxygenation of fast pyrolysis oil. MSc Thesis, The University of Western OntarioGoogle Scholar
  51. 51.
    Duan P, Savage PE (2011) Catalytic hydrotreatment of crude algal bio-oil in supercritical water. Appl Catal B Environ 104:136–143CrossRefGoogle Scholar
  52. 52.
    Li W, Pan C, Zhang Q, Liu Z, Peng J, Chen P, Lou H, Zheng X (2011) Upgrading of low-boiling fraction of bio-oil in supercritical methanol and reaction network. Bioresour Technol 102:4884–4889CrossRefGoogle Scholar
  53. 53.
    Dang Q, Luo Z, Zhang J, Wang J, Chen W, Yang Y (2013) Experimental study on bio-oil upgrading over Pt/SO42−/ZrO2/SBA15 catalyst in supercritical ethanol. Fuel 103:683–692CrossRefGoogle Scholar
  54. 54.
    Xu X, Zhang C, Zhai Y, Liu Y, Zhang R, Tang X (2014) Upgrading of bio-oil using supercritical 1-butanol over a Ru/C heterogeneous catalyst: role of the solvent. Energy Fuel 28:4611–4621CrossRefGoogle Scholar
  55. 55.
    Williams P, Horne P (1995) Analysis of aromatic hydrocarbons in pyrolytic oil derived from biomass. J Anal Appl Pyrolysis 31:15–37CrossRefGoogle Scholar
  56. 56.
    Graça I, Lopes JM, Cerqueira HS, Ribeiro MF (2013) Bio-oils upgrading for second generation biofuels. Ind Eng Chem Res 52:275–287CrossRefGoogle Scholar
  57. 57.
    Serrano-Ruiz JC, Dumesic JA (2012) Catalytic production of liquid hydrocarbon transportation fuels. In: Guczi L, Erdôhelyi A (eds) Catalysis for alternative energy generation. Springer, New YorkGoogle Scholar
  58. 58.
    Park HJ, Heo HS, Jeon JK, Kim J, Ryoo R, Jeong KE, Park YK (2010) Highly valuable chemicals production from catalytic upgrading of radiata pine sawdust- derived pyrolytic vapors over mesoporous MFI zeolites. Appl Catal B Environ 95:365–373CrossRefGoogle Scholar
  59. 59.
    Wei Y, Lei H, Zhu L, Zhang X, Liu Y, Yadavalli G, Zhu X, Qian M, Yan D (2016) Hydrocarbon produced from upgrading rich phenolic compound bio-oil with low catalyst coking. Fuel 178:77–84CrossRefGoogle Scholar
  60. 60.
    Fan Y, Cai Y, Li X, Yin H, Chen L, Liu S (2015) Regeneration of the HZSM-5 zeolite deactivated in the upgrading of bio-oil via non-thermal plasma injection (NTPI) technology. J Anal Appl Pyrolysis 111:209–215CrossRefGoogle Scholar
  61. 61.
    Gayubo AG, Valle B, Aguayo AT, Olazar M, Bilbao J (2010) Pyrolytic lignin removal for the valorization of biomass pyrolysis crude bio-oil by catalytic transformation. J Chem Technol Biotechnol 85:132–144CrossRefGoogle Scholar
  62. 62.
    Blasco T, Corma A, Martínez-Triguero J (2006) Hydrothermal stabilization of ZSM-5 catalytic-cracking additives by phosphorus addition. J Catal 237:267–277CrossRefGoogle Scholar
  63. 63.
    Kersten SRA, van Swaaij WPM, Lefferts L, Seshan K (2007) In: Centi G, van Santen RA (eds) Catalysis for renewables-from feedstocks to energy production. Wiley-VCH, Weinheim, pp 119–146. (Chapter 6)CrossRefGoogle Scholar
  64. 64.
    Robinson AM, Hensley JE, Will Medlin J (2016) Bifunctional catalysts for upgrading of biomass-derived oxygenates: a review. ACS Catal 6:5026–5043CrossRefGoogle Scholar
  65. 65.
    Bulushev DA, Ross JRH (2011) Catalysis for conversion of biomass to fuels via pyrolysis and gasification: a review. Catal Today 171:1–13CrossRefGoogle Scholar
  66. 66.
    Deng L, Fu Y, Guo QX (2009) Upgraded acidic components of bio-oil through catalytic ketonic condensation. Energy Fuel 23:564–568CrossRefGoogle Scholar
  67. 67.
    Kastner JR, Hilten R, Weber J, McFarlane AR, Hargreaves JSJ, Batra VS (2015) Continuous catalytic upgrading of fast pyrolysis oil using iron oxides in red mud. RSC Adv 5:29375–29385CrossRefGoogle Scholar
  68. 68.
    Zakzeski J, Bruijnincx PCA, Jongerius AL, Weckhuysen BM (2010) The catalytic valorization of lignin for the production of renewable chemicals. Chem Rev 110:3552–3599CrossRefGoogle Scholar
  69. 69.
    Stocker M (2008) Biofuels and biomass-to-liquid fuels in the biorefinery: catalytic conversion of lignocellulosic biomass using porous materials. Angew Chem Int Ed 47:9200–9211CrossRefGoogle Scholar
  70. 70.
    Melero JA, Iglesias J, Garcia A (2012) Biomass as renewable feedstock in standard refinery units. Feasibility, opportunities and challenges. Energy Environ Sci 5:7393–7420CrossRefGoogle Scholar
  71. 71.
    Pfitzer C, Dahmen N, Tröger N, Weirich F, Sauer J, Günther A, Müller-Hagedorn M (2016) Fast pyrolysis of wheat straw in the Bioliq pilot plant. Energy Fuel 30:8047–8054CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.National Petrochemical Company, Petrochemical Research and Technology CompanyTehranIran

Personalised recommendations