Encyclopedia of Sustainability in Higher Education

Living Edition
| Editors: Walter Leal Filho

Sustainability Balance

  • Oanh Thi-Kieu HoEmail author
  • Usha Iyer-Raniga
  • James P. C. Wong
Living reference work entry
DOI: https://doi.org/10.1007/978-3-319-63951-2_64-1

Introduction

For many years, the construction industry has increasingly been concerned about environmental impact, usually expressed as greenhouse gas (GHG) emissions, resource consumption, and waste generation. This industry consumes more than 40% of the world’s resources, requires 40% of global energy, emits 30% of GHG emissions, and uses 25% of the global water supply (UNEP 2016). To reduce these problems, sustainability goals have been incorporated into the construction industry globally.

Apart from the building and construction industry, the office buildings sector has a significant impact on the environment. It should take responsibility for its energy consumption, waste generation, greenhouse gas emissions, natural resources depletion during project lifecycle from initial stage to demolition stage (Ortiz et al. 2009). Regarding the United States (USA), buildings alone consume 39% of energy use, 72% of electricity resources, emit 39% of carbon dioxide, and consume 13.6% of...

This is a preview of subscription content, log in to check access.

References

  1. ABS (2016) Construction and the environment [Online]. http://www.abs.gov.au/ausstats/abs@.nsf/featurearticlesbytitle/17A5995C5D55BBBDCA256CAE0015F653?OpenDocument. Accessed 9 Jan 2016
  2. Ahn YH, Pearce AR (2007) Green construction: contractor experiences, expectations, and perceptions. J Green Build 2:106–122CrossRefGoogle Scholar
  3. Akadiri PO, Olomolaiye PO, Chinyio EA (2013) Multi-criteria evaluation model for the selection of sustainable materials for building projects. Autom Constr 30:113–125CrossRefGoogle Scholar
  4. Australian Government (2015) National Inventory by Economic Sector 2013Google Scholar
  5. Butera FM (2010) Climatic change and the built environment. Adv Build Energy Res 4:45–75CrossRefGoogle Scholar
  6. Calkins M (2008) Materials for sustainable sites: a complete guide to the evaluation, selection, and use of sustainable construction materials. Wiley, HobokenGoogle Scholar
  7. Chen M, Chen JG, Cheng XX (2011) Life cycle incremental cost-benefit analysis of green building. Appl Mech Mater 71–78:4645CrossRefGoogle Scholar
  8. Collier ZA, Wang D, Vogel JT, Tatham EK, Linkov I (2013) Sustainable roofing technology under multiple constraints: a decision-analytical approach. Environ Syst Decis 33:261–271CrossRefGoogle Scholar
  9. Convertino M, Baker K, Vogel J, Lu C, Suedel B, Linkov I (2013) Multi-criteria decision analysis to select metrics for design and monitoring of sustainable ecosystem restorations. Ecol Indic 26:76–86CrossRefGoogle Scholar
  10. Corr K, Adams I, Boynton D (2008) Water use and sustainable commercial buildings [Online]. Australian Policy Online. http://apo.org.au/resource/water-use-and-sustainable-commercial-buildings2016. Accessed 9 Jan 2016
  11. Da Silva L, Ruwanpura JY (2009) Review of the LEED points obtained by Canadian building projects. J Archit Eng 15:38–54CrossRefGoogle Scholar
  12. Dadzie J, Ding G, Runeson G (2017) Relationship between sustainable technology and building age: evidence from Australia. Procedia Eng 180:1131–1138CrossRefGoogle Scholar
  13. Darko A, Chan AP, Owusu-Manu D-G, Ameyaw EE (2017) Drivers for implementing green building technologies: an international survey of experts. J Clean Prod 145:386–394CrossRefGoogle Scholar
  14. Doulos LT, Tsangrassoulis A, Kontaxis PA, Kontadakis A, Topalis FV (2017) Harvesting daylight with LED or T5 fluorescent lamps? The role of dimming. Energ Buildings 140:336–347CrossRefGoogle Scholar
  15. EIA report (2008) Annual energy review [Online]. https://www.eia.gov/totalenergy/data/annual/archive/038408.pdf. Accessed 3 Dec 2018
  16. Elkington JB (1997) Cannibals With Forks: The Triple Bottom Line of 21st Century Business. Oxford: Capstone PublishingGoogle Scholar
  17. Energy Market Authority (2018) Singapore energy statistics [Online]. https://www.ema.gov.sg/cmsmedia/Publications_and_Statistics/Publications/SES18/Publication_Singapore_Energy_Statistics_2018.pdf. Accessed 3 Dec 2018
  18. GBCA (2008a) The dollars and sense of green buildings: building the business case for green commercial buildings in Australia, Sydney, NSW, Green Building Council of AustraliaGoogle Scholar
  19. GBCA (2008b) Technical manual: green star office design & office as built. Green Building Council, SydneyGoogle Scholar
  20. GBCA (2015b) Mid-tier commercial buildings sector report [Online]. https://www.gbca.org.au/advocacy/mid-tier-commercial-office-buildings-pathway-project/36449.htm. Accessed 30 Mar 2017
  21. Gluch P, Baumann H (2004) The life cycle costing (LCC) approach: a conceptual discussion of its usefulness for environmental decision-making. Build Environ 39:571–580CrossRefGoogle Scholar
  22. Houghton A, Vittori G, Guenther R (2009) Demystifying first-cost green building premiums in healthcare. HERD: Health Environ Res Des J 2:10–45CrossRefGoogle Scholar
  23. Hwang B-G, Tan JS (2012) Green building project management: obstacles and solutions for sustainable development. Sustain Dev 20:335–349CrossRefGoogle Scholar
  24. Issa MH, Rankin JH, Christian AJ (2010) Canadian practitioners’ perception of research work investigating the cost premiums, long-term costs and health and productivity benefits of green buildings. Build Environ 45:1698–1711CrossRefGoogle Scholar
  25. Kats G (2010) Greening our built world: costs, benefits, and strategies. Island Press, Washington, DCGoogle Scholar
  26. Kats, G, Alevantis L, Berman A, Mills E, Perlman J (2003) The costs and financial benefits of green buildings: a report to California’s sustainable building task force, Washington: Capital EGoogle Scholar
  27. Kim J-L, Greene M, Kim S (2014) Cost comparative analysis of a new green building code for residential project development. J Constr Eng Manag 140: 05014002CrossRefGoogle Scholar
  28. Kneifel J (2010) Life-cycle carbon and cost analysis of energy efficiency measures in new commercial buildings. Energ Buildings 42:333–340CrossRefGoogle Scholar
  29. Langdon D (2007) The cost and benefit of achieving green buildings. Second Quarter. Retrieved 2 Aug 2012Google Scholar
  30. Love PE, Niedzweicki M, Bullen PA, Edwards DJ (2011) Achieving the green building council of Australia’s world leadership rating in an office building in Perth. J Constr Eng Manag 138:652–660CrossRefGoogle Scholar
  31. Matthiessen LF, Morris P, Langdon D, Association, CAB (2007) Cost of green revisited: reexamining the feasibility and cost impact of sustainable design in the light of increased market adoption. Continental Automated Buildings Association, OttawaGoogle Scholar
  32. Nadoushani ZSM, Akbarnezhad A, Jornet, JF and Xiao, J (2017) Multi-criteria selection of façade systems based on sustainability criteria. Building and Environment 121:67–78CrossRefGoogle Scholar
  33. Ortiz O, Castells F, Sonnemann G (2009) Sustainability in the construction industry: a review of recent developments based on LCA. Constr Build Mater 23:28–39CrossRefGoogle Scholar
  34. Pohekar SD, Ramachandran M (2004) Application of multi-criteria decision making to sustainable energy planning – a review. Renew Sust Energ Rev 8:365–381CrossRefGoogle Scholar
  35. Rehm M, Ade R (2013) Construction costs comparison between ‘green’ and conventional office buildings. Build Res Inf 41:198–208CrossRefGoogle Scholar
  36. Sheikh N, Daim T, Kocaoglu DF (2011) Use of multiple perspectives and decision modeling for PV technology assessment. Technology Management in the Energy Smart World (PICMET), 2011 Proceedings of PICMET’11, 2011. IEEE, pp 1–21Google Scholar
  37. Si J, Marjanovic-Halburd L, Nasiri F, Bell S (2016) Assessment of building-integrated green technologies: a review and case study on applications of multi-criteria decision making (MCDM) method. Sustain Cities Soc 27:106–115CrossRefGoogle Scholar
  38. Steven Winter Associates, I (2004) GSA LEED cost study: final report. US General Services Administration, Washington, DCGoogle Scholar
  39. UNEP (2016) Why buildings [Online]. http://www.unep.org/sbci/AboutSBCI/Background.asp. Accessed 9 Jan 2016
  40. Vyas GS, Jha KN (2017) Benchmarking green building attributes to achieve cost effectiveness using a data envelopment analysis. Sustain Cities Soc 28:127–134CrossRefGoogle Scholar
  41. WCED (1987) Our common future. Oxford University Press, LondonGoogle Scholar
  42. Yudelson J (2010) The green building revolution. Island Press. WashingtonGoogle Scholar
  43. Zhao X, Chen L, Pan W, Lu Q (2017) AHP-ANP–fuzzy integral integrated network for evaluating performance of innovative business models for sustainable building. J Constr Eng Manag 143:04017054CrossRefGoogle Scholar
  44. Zuo J, Xia B, Chen Q, Pullen S, Skitmore M (2016) Green building rating for office buildings – Lessions learned. J Green Build 11:131–146CrossRefGoogle Scholar

Copyright information

© Crown 2019

Authors and Affiliations

  • Oanh Thi-Kieu Ho
    • 1
    Email author
  • Usha Iyer-Raniga
  • James P. C. Wong
  1. 1.School of Property, Construction and Project ManagementRMIT UniversityMelbourneAustralia

Section editors and affiliations

  • Mark C. Mifsud
    • 1
  1. 1.University of MaltaMsidaMalta