Advertisement

Recent Trends in Nanofiber-Based Anticorrosion Coatings

  • Akihiro YabukiEmail author
  • Indra W. Fathona
Reference work entry

Abstract

Various forms of polymer coatings have been applied in corrosion-control attempts to prolong the useful life of materials. The drawback of polymer coating systems, however, is the inability to function if the coating is damaged or breached. A design for self-healing coatings that would provide repetitive protection has recently been proposed. Self-healing is a natural ability found in both humans and animals to spontaneously cure injury or illness, and the ability is now being used in anticorrosion coating. This chapter begins with brief descriptions of corrosion and corrosion protection. That is followed by descriptions of the properties of various anticorrosion coatings, the concept of self-healing coatings, and the nanomaterials that are used in self-healing coatings. Then, the use of nanofibers as an important nanomaterial in the self-healing process is explained as follows. The network structure by nanofibers in a coating system not only provides a container for inhibitors but also provides channels and pathways for the release of corrosion inhibitor. The performance of a self-healing coating that uses nanofibers is determined by the successful release of corrosion inhibitor. The controlled release of corrosion inhibitors via a change in the pH of nanofibers enhances the performance of self-healing coatings. Finally, trends are proposed for the use of nanofibers as self-healing, anticorrosion coatings.

Keywords

Nanofiber Self-healing Corrosion Coating Corrosion inhibitor Network structure Controlled release 

References

  1. 1.
    Ahmad Z (2013) Principles of corrosion engineering and corrosion control. J Chem Inf Model 53:1689–1699  https://doi.org/10.1017/CBO9781107415324.004
  2. 2.
    Schönbein C (1936) Pogg Ann 37:390Google Scholar
  3. 3.
    Schweitzer PA (2009) Fundamental of corrosion: Mechanisms, Causes Methods, and Preventative, Boca Raton, Florida-USA, CRC Press, pp 5–26.  https://doi.org/10.1201/9781420067712.ch2
  4. 4.
    Davoodi M, Nasr-Esfahani M (2016) Enhancement of the anti-corrosion efficient of hybrid nanostructure coating using copper phthalocyanine self-assembled monolayers. Prot Met Phys Chem Surfaces 52:149–155.  https://doi.org/10.1134/S207020511601007XCrossRefGoogle Scholar
  5. 5.
    He X, Chiu C, Esmacher MJ, Liang H (2013) Nanostructured photocatalytic coatings for corrosion protection and surface repair. Surf Coat Technol 237:320–327.  https://doi.org/10.1016/j.surfcoat.2013.06.038CrossRefGoogle Scholar
  6. 6.
    Ding C, Liu Y, Wang M, Wang T, Fu J (2016) Self-healing, superhydrophobic coating based on mechanized silica nanoparticles for reliable protection of magnesium alloys. J Mater Chem A 4:8041–8052.  https://doi.org/10.1039/C6TA02575GCrossRefGoogle Scholar
  7. 7.
    Shi H, Han EH, Lamaka SV, Zheludkevich ML, Liu F, Ferreira MGS (2014) Cerium cinnamate as an environmentally benign inhibitor pigment for epoxy coatings on AA 2024-T3. Prog Org Coat 77:765–773.  https://doi.org/10.1016/j.porgcoat.2014.01.003CrossRefGoogle Scholar
  8. 8.
    Wang H, Gao M, Guo Y, Yang Y, Hu R (2016) A natural extract of tobacco rob as scale and corrosion inhibitor in artificial seawater. Desalination 398:198–207.  https://doi.org/10.1016/j.desal.2016.07.035CrossRefGoogle Scholar
  9. 9.
    Shainy KM, Rugmini Ammal P, Unni KN, Benjamin S, Joseph A (2016) Surface interaction and corrosion inhibition of mild steel in hydrochloric acid using pyoverdine, an eco-friendly bio-molecule. J Bio Tribo Corros 2:20.  https://doi.org/10.1007/s40735-016-0050-3CrossRefGoogle Scholar
  10. 10.
    Alam M, Akram D, Sharmin E, Zafar F, Ahmad S (2014) Vegetable oil based eco-friendly coating materials: a review article. Arab J Chem 7:469–479.  https://doi.org/10.1016/j.arabjc.2013.12.023CrossRefGoogle Scholar
  11. 11.
    Umoren SA, Obot IB, Madhankumar A, Gasem ZM (2015) Performance evaluation of pectin as ecofriendly corrosion inhibitor for X60 pipeline steel in acid medium: experimental and theoretical approaches. Carbohydr Polym 124:280–291.  https://doi.org/10.1016/j.carbpol.2015.02.036CrossRefGoogle Scholar
  12. 12.
    Niroumandrad S, Rostami M, Ramezanzadeh B (2015) Corrosion resistance of flaky aluminum pigment coated with cerium oxides/hydroxides in chloride and acidic electrolytes. Appl Surf Sci 357:2121–2130.  https://doi.org/10.1016/j.apsusc.2015.09.195CrossRefGoogle Scholar
  13. 13.
    Palomino LEM, de Castro JFW, Aoki IV, de Melo HG (2003) Microstructural and electrochemical characterization of environmentally friendly conversion layers on aluminium alloys. J Braz Chem Soc 14:651–659CrossRefGoogle Scholar
  14. 14.
    Ivušić F, Lahodny-Šarc O, Ćurković HO, Alar V (2015) Synergistic inhibition of carbon steel corrosion in seawater by cerium chloride and sodium gluconate. Corros Sci 98:88–97.  https://doi.org/10.1016/j.corsci.2015.05.017CrossRefGoogle Scholar
  15. 15.
    Hinton BRW (1992) Corrosion inhibition with rare earth metal salts. J Alloys Compd 180:15–25CrossRefGoogle Scholar
  16. 16.
    Nam ND, Somers A, Mathesh M, Seter M, Hinton B, Forsyth M, Tan MYJ (2014) The behaviour of praseodymium 4-hydroxycinnamate as an inhibitor for carbon dioxide corrosion and oxygen corrosion of steel in NaCl solutions. Corros Sci 80:128–138.  https://doi.org/10.1016/j.corsci.2013.11.013CrossRefGoogle Scholar
  17. 17.
    Trabelsi W, Cecilio P, Ferreira MGS, Montemor MF (2005) Electrochemical assessment of the self-healing properties of Ce-doped silane solutions for the pre-treatment of galvanised steel substrates. Prog Org Coat 54:276–284.  https://doi.org/10.1016/j.porgcoat.2005.07.006CrossRefGoogle Scholar
  18. 18.
    Shaw BA, Davis GD, Fritz TL, Olver KA (1990) A molybdate treatment for enhancing the passivity of aluminum in chloride-containing environments. J Electrochem Soc 137:359–360. http://jes.ecsdl.org/content/137/1/359.abstractCrossRefGoogle Scholar
  19. 19.
    Breslin CB, Treacy G, Carroll WM (1994) Studies on the passivation of aluminium in chromate and molybdate solutions. Corros Sci 36:1143–1154.  https://doi.org/10.1016/0010-938X(94)90139-2CrossRefGoogle Scholar
  20. 20.
    Choi H, Kim KY, Park JM (2013) Encapsulation of aliphatic amines into nanoparticles for self-healing corrosion protection of steel sheets. Prog Org Coat 76:1316–1324.  https://doi.org/10.1016/j.porgcoat.2013.04.005CrossRefGoogle Scholar
  21. 21.
    Kopeć M, Szczepanowicz K, Mordarski G, Podgórna K, Socha RP, Nowak P, Warszyński P, Hack T (2015) Self-healing epoxy coatings loaded with inhibitor-containing polyelectrolyte nanocapsules. Prog Org Coat 84:97–106.  https://doi.org/10.1016/j.porgcoat.2015.02.011CrossRefGoogle Scholar
  22. 22.
    Shchukin DG, Zheludkevich M, Yasakau K, Lamaka S, Ferreira MGS, Möhwald H (2006) Layer-by-layer assembled nanocontainers for self-healing corrosion protection. Adv Mater 18:1672–1678.  https://doi.org/10.1002/adma.200502053CrossRefGoogle Scholar
  23. 23.
    Shchukin DG, Möhwald H (2007) Surface-engineered nanocontainers for entrapment of corrosion inhibitors. Adv Funct Mater 17:1451–1458.  https://doi.org/10.1002/adfm.200601226CrossRefGoogle Scholar
  24. 24.
    Zheludkevich M (2008) Self-healing anticorrosion coatings, in: self-healing mater. Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, Germany, pp 101–139.  https://doi.org/10.1002/9783527625376.ch4
  25. 25.
    Zheludkevich ML, Tedim J, Ferreira MGS (2012) “Smart” coatings for active corrosion protection based on multi-functional micro and nanocontainers. Electrochim Acta 82:314–323.  https://doi.org/10.1016/j.electacta.2012.04.095CrossRefGoogle Scholar
  26. 26.
    Fairhurst D (2016) Coatings for structures in contact with the ground. In: Reference module in materials science and materials engineering. Elsevier.  https://doi.org/10.1016/B978-0-12-803581-8.01678-7Google Scholar
  27. 27.
    Trivedi PA, Solanki NM, Butani N, Parikh PA (2014) Investigation on corrosion control of mild steel buried in soil by spent FCC catalyst coating. J Ind Eng Chem 20:2264–2271.  https://doi.org/10.1016/j.jiec.2013.10.001CrossRefGoogle Scholar
  28. 28.
    Popoola L, Grema A, Latinwo G, Gutti B, Balogun A (2013) Corrosion problems during oil and gas production and its mitigation. Int J Ind Chem 4:35.  https://doi.org/10.1186/2228-5547-4-35CrossRefGoogle Scholar
  29. 29.
    Işcan B (2016) Application of ceramic coating for improving the usage of cottonseed oil in a diesel engine. J Energy Inst 89:150–157.  https://doi.org/10.1016/j.joei.2015.01.001CrossRefGoogle Scholar
  30. 30.
    Akhtari Zavareh M, Mohammed Sarhan AAD, Akhtari Zavareh P, Basirun WJ (2015) Electrochemical corrosion behavior of carbon steel pipes coated with a protective ceramic layer using plasma and HVOF thermal spray techniques for oil and gas. Ceram Int 42:3397–3406.  https://doi.org/10.1016/j.ceramint.2015.10.134CrossRefGoogle Scholar
  31. 31.
    Eremin EN, Yurov VM, Ibatov MK, Guchenko SA, Laurynas VC (2016) Anti-corrosion wear-resistant coatings on parts of oil field equipment. Procedia Eng 152:594–600.  https://doi.org/10.1016/j.proeng.2016.07.661CrossRefGoogle Scholar
  32. 32.
    Cho HW, Chang HY, Lim BT, Park HB, Kim YS (2015) Effect of RuCl 3 concentration on the lifespan of insoluble anode for cathodic protection on PCCP, 14:177–183Google Scholar
  33. 33.
    Yabuki A, Sakai M (2009) Anodic films formed on magnesium in organic, silicate-containing electrolytes. Corros Sci 51:793–798.  https://doi.org/10.1016/j.corsci.2009.02.001CrossRefGoogle Scholar
  34. 34.
    Yabuki A, Sakai M (2011) Self-healing coatings of inorganic particles using a pH-sensitive organic agent. Corros Sci 53:829–833.  https://doi.org/10.1016/j.corsci.2010.11.021CrossRefGoogle Scholar
  35. 35.
    Yabuki A, Nishisaka T (2011) Self-healing capability of porous polymer film with corrosion inhibitor inserted for corrosion protection. Corros Sci 53:4118–4123.  https://doi.org/10.1016/j.corsci.2011.08.022CrossRefGoogle Scholar
  36. 36.
    Kakaroglou A, Domini M, De Graeve I (2015) Encapsulation and incorporation of sodium molybdate in polyurethane coatings and study of its corrosion inhibition on mild steel. Surf Coat Technol 303:330–341.  https://doi.org/10.1016/j.surfcoat.2016.02.007CrossRefGoogle Scholar
  37. 37.
    Pirhady Tavandashti N, Ghorbani M, Shojaei A, Mol JMC, Terryn H, Baert K, Gonzalez-Garcia Y (2016) Inhibitor-loaded conducting polymer capsules for active corrosion protection of coating defects. Corros Sci 112:138–149.  https://doi.org/10.1016/j.corsci.2016.07.003CrossRefGoogle Scholar
  38. 38.
    Nguyen Thuy D, To Thi Xuan H, Nicolay A, Paint Y, Olivier M-G (2016) Corrosion protection of carbon steel by solvent free epoxy coating containing hydrotalcites intercalated with different organic corrosion inhibitors. Prog Org Coat 101:331–341.  https://doi.org/10.1016/j.porgcoat.2016.08.021CrossRefGoogle Scholar
  39. 39.
    Twite RL, Bierwagen GP (1998) Review of alternatives to chromate for corrosion protection of aluminum aerospace alloys. Prog Org Coat 33:91–100.  https://doi.org/10.1016/S0300-9440(98)00015-0CrossRefGoogle Scholar
  40. 40.
    Montemor MF (2014) Functional and smart coatings for corrosion protection: a review of recent advances. Surf Coat Technol 258:17–37.  https://doi.org/10.1016/j.surfcoat.2014.06.031CrossRefGoogle Scholar
  41. 41.
    Mostafaei A, Nasirpouri F (2014) Epoxy/polyaniline-ZnO nanorods hybrid nanocomposite coatings: synthesis, characterization and corrosion protection performance of conducting paints. Prog Org Coat 77:146–159.  https://doi.org/10.1016/j.porgcoat.2013.08.015CrossRefGoogle Scholar
  42. 42.
    Figueira RB, Silva CJR, Pereira EV (2015) Organic–inorganic hybrid sol–gel coatings for metal corrosion protection: a review of recent progress. J Coat Technol Res 12:1–35.  https://doi.org/10.1007/s11998-014-9595-6CrossRefGoogle Scholar
  43. 43.
    Abaci S, Nessark B (2014) Characterization and corrosion protection properties of composite material (PANI+TiO2) coatings on A304 stainless steel. J Coat Technol Res 12:107–120.  https://doi.org/10.1007/s11998-014-9611-xCrossRefGoogle Scholar
  44. 44.
    Patil RC, Radhakrishnan S (2006) Conducting polymer based hybrid nano-composites for enhanced corrosion protective coatings. Prog Org Coat 57:332–336.  https://doi.org/10.1016/j.porgcoat.2006.09.012CrossRefGoogle Scholar
  45. 45.
    Olad A, Nosrati R (2013) Preparation and corrosion resistance of nanostructured PVC/ZnO–polyaniline hybrid coating. Prog Org Coat 76:113–118.  https://doi.org/10.1016/j.porgcoat.2012.08.017CrossRefGoogle Scholar
  46. 46.
    Ramezanzadeh B, Attar MM, Farzam M (2011) A study on the anticorrosion performance of the epoxy–polyamide nanocomposites containing ZnO nanoparticles. Prog Org Coat 72:410–422.  https://doi.org/10.1016/j.porgcoat.2011.05.014CrossRefGoogle Scholar
  47. 47.
    Ramezanzadeh B, Attar MM (2011) Studying the effects of micro and nano sized ZnO particles on the corrosion resistance and deterioration behavior of an epoxy-polyamide coating on hot-dip galvanized steel. Prog Org Coat 71:314–328.  https://doi.org/10.1016/j.porgcoat.2011.03.026CrossRefGoogle Scholar
  48. 48.
    Sathiyanarayanan S, Azim SS, Venkatachari G (2007) Preparation of polyaniline–Fe2O3 composite and its anticorrosion performance. Synth Met 157:751–757.  https://doi.org/10.1016/j.synthmet.2007.08.004CrossRefGoogle Scholar
  49. 49.
    Sathiyanarayanan S, Azim SS, Venkatachari G (2007) Corrosion protection of magnesium ZM 21 alloy with polyaniline–TiO2 composite containing coatings. Prog Org Coat 59:291–296.  https://doi.org/10.1016/j.porgcoat.2007.04.004CrossRefGoogle Scholar
  50. 50.
    Toohey KS, Sottos NR, White SR (2009) Characterization of microvascular-based self-healing coatings. Exp Mech 49:707–717.  https://doi.org/10.1007/s11340-008-9176-7CrossRefGoogle Scholar
  51. 51.
    Toohey KS, Sottos NR, Lewis JA, Moore JS, White SR (2007) Self-healing materials with microvascular networks. Nat Mater 6:581–585.  https://doi.org/10.1038/nmat1934CrossRefGoogle Scholar
  52. 52.
    Diesendruck CE, Sottos NR, Moore JS, White SR (2015) Biomimetic self-healing. Angew Chem Int Ed 54:10428–10447.  https://doi.org/10.1002/anie.201500484CrossRefGoogle Scholar
  53. 53.
    Yabuki A, Kawashima A, Fathona IW (2014) Self-healing polymer coatings with cellulose nanofibers served as pathways for the release of a corrosion inhibitor. Corros Sci 85:141–146.  https://doi.org/10.1016/j.corsci.2014.04.010CrossRefGoogle Scholar
  54. 54.
    Ghosh SK (2008) Self-healing materials: fundamentals, design strategies, and applications. In: Self-healing materials. Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, Germany, pp 1–28.  https://doi.org/10.1002/9783527625376.ch1
  55. 55.
    Pandey JK, Takagi H (2011) Self healing potential of green nanocomposites from crystalline cellulose. Int J Mod Phys B 25:4216–4219.  https://doi.org/10.1142/S0217979211066611CrossRefGoogle Scholar
  56. 56.
    Billiet S, Hillewaere XKD, Teixeira RFA, Du Prez FE (2013) Chemistry of crosslinking processes for self-healing polymers. Macromol Rapid Commun 34:290–309.  https://doi.org/10.1002/marc.201200689CrossRefGoogle Scholar
  57. 57.
    Hager MD, Greil P, Leyens C, Van Der Zwaag S, Schubert US (2010) Self-healing materials. Adv Mater 22:5424–5430.  https://doi.org/10.1002/adma.201003036CrossRefGoogle Scholar
  58. 58.
    Michal BT, Jaye CA, Spencer EJ, Rowan SJ (2013) Inherently photohealable and thermal shape-memory polydisulfide networks. ACS Macro Lett 2:694–699.  https://doi.org/10.1021/mz400318mCrossRefGoogle Scholar
  59. 59.
    Bergman SD, Wudl F (2008) Mendable polymers. J Mater Chem 18:41–62.  https://doi.org/10.1039/B713953PCrossRefGoogle Scholar
  60. 60.
    Abdullayev E, Lvov Y (2010) Clay nanotubes for corrosion inhibitor encapsulation: release control with end stoppers. J Mater Chem 20:6681.  https://doi.org/10.1039/c0jm00810aCrossRefGoogle Scholar
  61. 61.
    Lvov Y, Abdullayev E (2013) Functional polymer-clay nanotube composites with sustained release of chemical agents. Prog Polym Sci 38:1690–1719.  https://doi.org/10.1016/j.progpolymsci.2013.05.009CrossRefGoogle Scholar
  62. 62.
    Mauricio MR, Guilherme MR, Kunita MH, Muniz EC, Rubira AF (2012) Designing nanostructured microspheres with well-defined outlines by mixing carboxyl-functionalized amylose and magnetite via ultrasound. Chem Eng J 189–190:456–463.  https://doi.org/10.1016/j.cej.2012.02.044CrossRefGoogle Scholar
  63. 63.
    Williams KA, Dreyer DR, Bielawski CW (2008) The underlying chemistry of self-healing materials. MRS Bull 33:759–765.  https://doi.org/10.1557/mrs2008.162CrossRefGoogle Scholar
  64. 64.
    Yabuki A, Shiraiwa T, Fathona IW (2015) pH-controlled self-healing polymer coatings with cellulose nanofibers providing an effective release of corrosion inhibitor. Corros Sci 103:117–123.  https://doi.org/10.1016/j.corsci.2015.11.015CrossRefGoogle Scholar
  65. 65.
    Shchukin DG, Lamaka SV, Yasakau KA, Zheludkevich ML, Ferreira MGS, Möhwald H (2008) Active anticorrosion coatings with halloysite nanocontainers. J Phys Chem C 112:958–964.  https://doi.org/10.1021/jp076188rCrossRefGoogle Scholar
  66. 66.
    Chen X, Dam MA, Ono K, Mal A, Shen H, Nutt SR, Sheran K, Wudl F (2002) A thermally re-mendable cross-linked polymeric material. Science 295:1698–1702.  https://doi.org/10.1126/science.1065879CrossRefGoogle Scholar
  67. 67.
    Kamplain JW, Bielawski CW (2006) Dynamic covalent polymers based upon carbene dimerization. Chem Commun 16:1727–1729.  https://doi.org/10.1039/b518246hCrossRefGoogle Scholar
  68. 68.
    Rohwerder M, Duc LM, Michalik A (2009) In situ investigation of corrosion localised at the buried interface between metal and conducting polymer based composite coatings. Electrochim Acta 54:6075–6081.  https://doi.org/10.1016/j.electacta.2009.02.103CrossRefGoogle Scholar
  69. 69.
    Rohwerder M, Michalik A (2007) Conducting polymers for corrosion protection: what makes the difference between failure and success? Electrochim Acta 53:1301–1314.  https://doi.org/10.1016/j.electacta.2007.05.026CrossRefGoogle Scholar
  70. 70.
    Rohwerder M, Isik-Uppenkamp S, Amarnath CA (2011) Application of the Kelvin Probe method for screening the interfacial reactivity of conducting polymer based coatings for corrosion protection. Electrochim Acta 56:1889–1893.  https://doi.org/10.1016/j.electacta.2010.09.098CrossRefGoogle Scholar
  71. 71.
    Paliwoda-Porebska G, Rohwerder M, Stratmann M, Rammelt U, Duc LM, Plieth W (2006) Release mechanism of electrodeposited polypyrrole doped with corrosion inhibitor anions. J Solid State Electrochem 10:730–736.  https://doi.org/10.1007/s10008-006-0118-yCrossRefGoogle Scholar
  72. 72.
    Vimalanandan A, Lv LP, Tran TH, Landfester K, Crespy D, Rohwerder M (2013) Redox-responsive self-healing for corrosion protection. Adv Mater 25:6980–6984.  https://doi.org/10.1002/adma.201302989CrossRefGoogle Scholar
  73. 73.
    Yeganeh M, Saremi M, Rezaeyan H (2014) Corrosion inhibition of steel using mesoporous silica nanocontainers incorporated in the polypyrrole. Prog Org Coat 77:1428–1435.  https://doi.org/10.1016/j.porgcoat.2014.05.007CrossRefGoogle Scholar
  74. 74.
    Mauldin TC, Rule JD, Sottos NR, White SR, Moore JS (2007) Self-healing kinetics and the stereoisomers of dicyclopentadiene. J R Soc Interface 4:389–393.  https://doi.org/10.1098/rsif.2006.0200CrossRefGoogle Scholar
  75. 75.
    Jones AS, Rule JD, Moore JS, White SR, Sottos NR (2006) Catalyst morphology and dissolution kinetics of self-healing polymers. Chem Mater 18:1312–1317.  https://doi.org/10.1021/cm051864sCrossRefGoogle Scholar
  76. 76.
    Yuan YC, Rong MZ, Zhang MQ, Chen J, Yang GC, Li XM (2008) Self-healing polymeric materials using epoxy/mercaptan as the healant. Macromolecules 41:5197–5202.  https://doi.org/10.1021/ma800028dCrossRefGoogle Scholar
  77. 77.
    Xiao DS, Yuan YC, Rong MZ, Zhang MQ (2009) Self-healing epoxy based on cationic chain polymerization. Polymer (Guildf) 50:2967–2975.  https://doi.org/10.1016/j.polymer.2009.04.029CrossRefGoogle Scholar
  78. 78.
    Jadhav AJ, Karekar SE, Pinjari DV, Datar YG, Bhanvase BA, Sonawane SH, Pandit AB (2015) Development of smart nanocontainers with a zinc phosphate core and a pH-responsive shell for controlled release of immidazole. Hybrid Mater 2:1–9.  https://doi.org/10.1515/hyma-2015-0001CrossRefGoogle Scholar
  79. 79.
    Qian B, Song Z, Hao L, Wang W, Kong D (2017) Self-healing epoxy coatings based on nanocontainers for corrosion protection of mild steel. J Electrochem Soc 164:C54–C60.  https://doi.org/10.1149/2.1251702jesCrossRefGoogle Scholar
  80. 80.
    Qian B, Song ZW, Hao L, Fan HQ (2017) Entrapment of polyaspartic acid on silica nanoparticle for self-healing coatings. Mater Corros:1–8.  https://doi.org/10.1002/maco.201609215CrossRefGoogle Scholar
  81. 81.
    Kartsonakis IA, Balaskas AC, Koumoulos EP, Charitidis CA, Kordas GC (2012) Incorporation of ceramic nanocontainers into epoxy coatings for the corrosion protection of hot dip galvanized steel. Corros Sci 57:30–41.  https://doi.org/10.1016/j.corsci.2011.12.037CrossRefGoogle Scholar
  82. 82.
    Chen C, Zhang F, Lin C, Pan J (2016) Corrosion protection and self-healing of a nanocomposite film of mussel adhesive protein and CeO2 nanoparticles on carbon steel. J Electrochem Soc 163:C545–C552.  https://doi.org/10.1149/2.0521609jesCrossRefGoogle Scholar
  83. 83.
    Zandi Zand R, Flexer V, De Keersmaecker M, Verbeken K, Adriaens A (2016) Self-healing silane coatings of cerium salt activated nanoparticles. Mater Corros 67:693–701.  https://doi.org/10.1002/maco.201508670CrossRefGoogle Scholar
  84. 84.
    Crina A, Benea L, Lakatos M, Dragan V (2008) Electrochemical impedance spectroscopy and corrosion behaviour of Al2O3 – Ni nano composite coatings. Electrochimica Acta 53:4557–4563.  https://doi.org/10.1016/j.electacta.2008.01.020CrossRefGoogle Scholar
  85. 85.
    Snihirova D, Lamaka SV, Cardoso MM, Condeço JAD, Ferreira HECS, De Fatima M (2014) pH-sensitive polymeric particles with increased inhibitor-loading capacity as smart additives for corrosion protective coatings for AA2024. Electrochim Acta 145:123–131.  https://doi.org/10.1016/j.electacta.2014.09.009CrossRefGoogle Scholar
  86. 86.
    Snihirova D, Lamaka SV, Montemor MF (2012) “SMART” protective ability of water based epoxy coatings loaded with CaCO3 microbeads impregnated with corrosion inhibitors applied on AA2024 substrates. Electrochim Acta 83:439–447.  https://doi.org/10.1016/j.electacta.2012.07.102CrossRefGoogle Scholar
  87. 87.
    Mekeridis ED, Kartsonakis IA, Kordas GC (2012) Multilayer organic – inorganic coating incorporating TiO2 nanocontainers loaded with inhibitors for corrosion protection of AA2024-T3. Prog Org Coat 73:142–148.  https://doi.org/10.1016/j.porgcoat.2011.10.005CrossRefGoogle Scholar
  88. 88.
    Amiri S, Rahimi A (2016) Anticorrosion behavior of cyclodextrins/inhibitor nanocapsule-based self-healing coatings. J Coat Technol Res 13:1095–1102.  https://doi.org/10.1007/s11998-016-9824-2CrossRefGoogle Scholar
  89. 89.
    Maia F, Yasakau KA, Carneiro J, Kallip S, Tedim J, Henriques T, Cabral A, Venâncio J, Zheludkevich ML, Ferreira MGS (2016) Corrosion protection of AA2024 by sol-gel coatings modified with MBT-loaded polyurea microcapsules. Chem Eng J 283:1108–1117.  https://doi.org/10.1016/j.cej.2015.07.087CrossRefGoogle Scholar
  90. 90.
    Siva T, Sathiyanarayanan S (2015) Self healing coatings containing dual active agent loaded urea formaldehyde (UF) microcapsules. Prog Org Coat 82:57–67.  https://doi.org/10.1016/j.porgcoat.2015.01.010CrossRefGoogle Scholar
  91. 91.
    Plawecka M, Snihirova D, Martins B, Szczepanowicz K, Warszynski P, Montemor MF (2014) Self healing ability of inhibitor-containing nanocapsules loaded in epoxy coatings applied on aluminium 5083 and galvanneal substrates. Electrochim Acta 140:282–293.  https://doi.org/10.1016/j.electacta.2014.04.035CrossRefGoogle Scholar
  92. 92.
    Suryanarayana C, Rao KC, Kumar D (2008) Preparation and characterization of microcapsules containing linseed oil and its use in self-healing coatings. Progress in Organic Coatings 63:72–78.  https://doi.org/10.1016/j.porgcoat.2008.04.008CrossRefGoogle Scholar
  93. 93.
    Kouhi M, Mohebbi A, Mirzaei M, Peikari M (2013) Optimization of smart self-healing coatings based on micro/nanocapsules in heavy metals emission inhibition. Prog Org Coat 76:1006–1015.  https://doi.org/10.1016/j.porgcoat.2013.02.014CrossRefGoogle Scholar
  94. 94.
    Rahimi A, Amiri S (2016) Self-healing anticorrosion coating containing 2-mercaptobenzothiazole and 2-mercaptobenzimidazole nanocapsules. J Polym Res 23.  https://doi.org/10.1007/s10965-016-0973-x
  95. 95.
    Selvakumar N, Jeyasubramanian K, Sharmila R (2012) Smart coating for corrosion protection by adopting nano particles. Prog Org Coat 74:461–469.  https://doi.org/10.1016/j.porgcoat.2012.01.011CrossRefGoogle Scholar
  96. 96.
    Matsuda T, Jadhav N, Kashi KB, Jensen M, Suryawanshi A (2015) Self-healing ability and particle size effect of encapsulated cerium nitrate into pH sensitive microcapsules. Prog Org Coat.  https://doi.org/10.1016/j.porgcoat.2015.10.021CrossRefGoogle Scholar
  97. 97.
    Szabó T, Telegdi J, Nyikos L (2015) Linseed oil-filled microcapsules containing drier and corrosion inhibitor – their effects on self-healing capability of paints. Prog Org Coat 84:136–142.  https://doi.org/10.1016/j.porgcoat.2015.02.020CrossRefGoogle Scholar
  98. 98.
    Doan TQ, Leslie LS, Kim SY, Bhargava R, White SR, Sottos NR (2016) Characterization of core-shell microstructure and self-healing performance of electrospun fiber coatings. Polymer (United Kingdom) 107:263–272.  https://doi.org/10.1016/j.polymer.2016.10.062CrossRefGoogle Scholar
  99. 99.
    Lee MW, An S, Lee C, Liou M, Yarin AL, Yoon SS (2014) Hybrid self-healing matrix using core-shell nanofibers and capsuleless microdroplets. ACS Appl Mater Interfaces 6:10461–10468.  https://doi.org/10.1021/am5020293CrossRefGoogle Scholar
  100. 100.
    Siva T, Kamaraj K, Karpakam V, Sathiyanarayanan S (2013) Soft template synthesis of poly (o-phenylenediamine) nanotubes and its application in self healing coatings. Prog Org Coat 76:581–588.  https://doi.org/10.1016/j.porgcoat.2012.11.009CrossRefGoogle Scholar
  101. 101.
    Qiu S, Chen C, Cui M, Li W, Zhao H, Wang L (2017) Corrosion protection performance of waterborne epoxy coatings containing self-doped polyaniline nanofiber. Appl Surf Sci 407:213–222.  https://doi.org/10.1016/j.apsusc.2017.02.142CrossRefGoogle Scholar
  102. 102.
    Pirhady Tavandashti N, Ghorbani M, Shojaei A, Gonzalez-Garcia Y, Terryn H, Mol JMC (2016) PH responsive Ce(III) loaded polyaniline nanofibers for self-healing corrosion protection of AA2024-T3. Prog Org Coat 99:197–209.  https://doi.org/10.1016/j.porgcoat.2016.04.046CrossRefGoogle Scholar
  103. 103.
    Yasakau KA, Kallip S, Zheludkevich ML, Ferreira MGS (2013) Active corrosion protection of AA2024 by sol – gel coatings with cerium molybdate nanowires. Electrochim Acta 112:236–246.  https://doi.org/10.1016/j.electacta.2013.08.126CrossRefGoogle Scholar
  104. 104.
    Falcon JM, Batista FF, Aoki IV (2013) Encapsulation of dodecylamine corrosion inhibitor on silica nanoparticles. Electrochim Acta 124:109–118.  https://doi.org/10.1016/j.electacta.2013.06.114CrossRefGoogle Scholar
  105. 105.
    Wei H, Wang Y, Guo J, Shen NZ, Jiang D, Zhang X, Yan X, Zhu J, Wang Q, Shao L, Lin H, Wei S, Guo Z (2015) Advanced micro/nanocapsules for self-healing smart anticorrosion coatings. J Mater Chem A 3:469–480.  https://doi.org/10.1039/C4TA04791ECrossRefGoogle Scholar
  106. 106.
    Lv L-P, Zhao Y, Landfester K, Crespy D (2014) Chemical encoding of amphiphilic copolymers for a dual controlled release from their assemblies. Polym Chem:5596–5601.  https://doi.org/10.1039/C4PY01159GCrossRefGoogle Scholar
  107. 107.
    Serdechnova M, Kallip S, Ferreira MGS, Zheludkevich ML (2014) Active self-healing coating for galvanically coupled multi-material assemblies. Electrochem Commun 41:51–54.  https://doi.org/10.1016/j.elecom.2014.01.023CrossRefGoogle Scholar
  108. 108.
    Poznyak SK, Tedim J, Rodrigues LM, Salak AN, Zheludkevich ML, Dick LFP, Ferreira MGS (2009) Novel inorganic host layered double hydroxides intercalated with guest organic inhibitors for anticorrosion applications. ACS Appl Mater Interfaces 1:2353–2362.  https://doi.org/10.1021/am900495rCrossRefGoogle Scholar
  109. 109.
    Williams G, McMurray HN (2004) Inhibition of filiform corrosion on polymer coated AA2024-T3 by hydrotalcite-like pigments incorporating organic anions. Electrochem Solid-State Lett 7:B13–B15.  https://doi.org/10.1149/1.1691529CrossRefGoogle Scholar
  110. 110.
    Bohm S, McMurray HN, Worsley DA, Powell SM (2001) Novel environment friendly corrosion inhibitor pigments based on naturally occurring clay minerals. Mater Corros/Werkst Korros 52:896–903. https://doi.org/10.1002/1521-4176(200112)52:12<896::AID-MACO896>3.0.CO;2-8CrossRefGoogle Scholar
  111. 111.
    Abdal-hay A, Lim J, Shamshi Hassan M, Lim JK (2013) Ultrathin conformal coating of apatite nanostructures onto electrospun nylon 6 nanofibers: mimicking the extracellular matrix. Chem Eng J 228:708–716.  https://doi.org/10.1016/j.cej.2013.05.022CrossRefGoogle Scholar
  112. 112.
    Park JH, Braun PV (2010) Coaxial electrospinning of self-healing coatings. Adv Mater 22:496–499.  https://doi.org/10.1002/adma.200902465CrossRefGoogle Scholar
  113. 113.
    Pang JWC, Bond IP (2005) A hollow fibre reinforced polymer composite encompassing self-healing and enhanced damage visibility. Compos Sci Technol 65:1791–1799.  https://doi.org/10.1016/j.compscitech.2005.03.008CrossRefGoogle Scholar
  114. 114.
    Williams G, Trask R, Bond I (2007) A self-healing carbon fibre reinforced polymer for aerospace applications. Compos Part A Appl Sci Manuf 38:1525–1532.  https://doi.org/10.1016/j.compositesa.2007.01.013CrossRefGoogle Scholar
  115. 115.
    Sinha-Ray S, Pelot DD, Zhou ZP, Rahman A, Wu X-F, Yarin AL (2012) Encapsulation of self-healing materials by coelectrospinning, emulsion electrospinning, solution blowing and intercalation. J Mater Chem 22:9138.  https://doi.org/10.1039/c2jm15696bCrossRefGoogle Scholar
  116. 116.
    Nishiyama Y, Sugiyama J, Chanzy H, Langan P (2003) Crystal structure and hydrogen bonding system in cellulose Iα from synchrotron x-ray and neutron fiber diffraction. J Am Chem Soc 125:14300–14306. doi:ja0257319 [pii]CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Graduate School of EngineeringHiroshima UniversityHigashihiroshimaJapan
  2. 2.Engineering Physics, School of Electrical EngineeringTelkom UniversityDayeuhkolotIndonesia

Personalised recommendations