Encyclopedia of Wildfires and Wildland-Urban Interface (WUI) Fires

Living Edition
| Editors: Samuel L. Manzello

Fences and Accessory Structures

Living reference work entry
DOI: https://doi.org/10.1007/978-3-319-51727-8_6-1

Synonyms

Definitions

A residential fence is a specific type of accessory structure defined as a man-made barrier used for marking, enclosing, or making private a property boundary or to enclose a portion of a property for other functions such as confining a garden or pet. Fences usually consist of uniformly spaced posts and uniformly spaced vertical or horizontal boards (see Fig. 1, left and right, respectively). The spacing between boards differs with type and design. Instead of boards, some fence designs use long diagonal pieces of material which are weaved (e.g., chain link; see Fig. 2, left) or alternating (e.g., lattice; see Fig. 2, right). Fences range in height from less than 1 m to over 2.5 m and often contain gates to allow entry or exit. The posts and components between posts may be made of noncombustible materials, such as steel, aluminum, or concrete, but are often made of wood,...
This is a preview of subscription content, log in to check access

References

  1. Hakes R, Caton S, Gorham D, Gollner M (2017) A review of pathways for building fire spread in the wildland urban interface part II: response of components and systems and mitigation strategies in the United States. Fire Technol 53(2):475–515CrossRefGoogle Scholar
  2. International Code Council (ICC) (2015) International wildland-urban interface code, 2014Google Scholar
  3. Jones J, Saginor A, Smith B (2012) 2011 Texas wildfires common denominators of home destruction, Texas A&M Forest ServiceGoogle Scholar
  4. Leonard J, Blanchi R, White N, Bicknell A, Sargeant A, Reisen F, Cheng M (2006) Research and investigation into the performance of residential boundary fencing systems in bushfires, CMIT-2006-186Google Scholar
  5. Manzello S (2013) The performance of concrete tile and terracotta tile roofing assemblies exposed to wind-driven firebrand showers, NIST technical note, National Institute of Standards and Technology, Gaithersburg, MD USA, vol 1794Google Scholar
  6. Manzello S, Suzuki S, Hayashi Y (2012) Exposing siding treatments, walls fitted with eaves, and glazing assemblies to firebrand showers. Fire Saf J 50:25–34CrossRefGoogle Scholar
  7. Maranghides A, Johnsson E (2008) Residential structure separation fire experiments, NIST technical note, National Institute of Standards and Technology, Gaithersburg, MD USA, vol 1600Google Scholar
  8. Maranghides A, McNamara D (2011) Wildland urban interface Amarillo fires report #2 – assessment of fire behavior and WUI measurement science, NIST technical note, National Institute of Standards and Technology, Gaithersburg, MD USA, vol 1909, p 2016Google Scholar
  9. National Fire Protection Association (NFPA) (2013) Standard for reducing structure ignition hazards from wildland fire, NFPA 1144Google Scholar
  10. Office of the California State Fire Marshal (CalFire) (2009) Materials and construction methods for exterior wildfire exposure, California WUI building code Chapter 7A, State of CaliforniaGoogle Scholar
  11. Quarles S (2017) Vulnerability of vents to wind-blown embers. Insurance Institute for Business and Home SafetyGoogle Scholar
  12. Standards Australia (2009) Construction of buildings in bushfire-prone areas. Australian Standard AS 3959, SydneyGoogle Scholar
  13. Suzuki S, Johnsson E, Maranghides A, Manzello S (2016) Ignition of wood fencing assemblies exposed to continuous wind-driven firebrand showers. Fire Technol 52:1051–1067CrossRefGoogle Scholar

Copyright information

© This is a U.S. Government work and not under copyright protection in the US; foreign copyright protection may apply 2018

Authors and Affiliations

  1. 1.National Institute of Standards and TechnologyGaithersburgUSA

Section editors and affiliations

  • Sayaka Suzuki
    • 1
  1. 1.National Research Institute of Fire and Disaster (NRIFD)TokyoJapan