Advertisement

Developing Virtual Microstructures and Statistically Equivalent Representative Volume Elements for Polycrystalline Materials

  • Somnath Ghosh
  • Michael A. Groeber
Living reference work entry

Abstract

This chapter introduces computational methods for generating virtual material microstructures of engineering materials with heterogeneities. Microstructures of polycrystalline materials containing localized features such as annealing twins, particulates or precipitates, and subgrain phases are the focus of this discussion. The methods use data from characterization methods to provide 3D statistical distribution and correlation functions that serve as inputs to the virtual microstructure generation process. Computational methods infer 3D statistical descriptors from 2D surface data and use stereology or other optimization-based projection techniques for 2D to 3D development. The chapter reviews the DREAM.3D software package and discusses newly developed methods to incorporate twins, particles, and subgrain-scale phases. Finally, the microstructure-based SERVE is introduced in the realm of establishing microstructure-property relations.

Notes

Acknowledgements

S. Ghosh acknowledges the contributions of his graduate students, M. Pinz, G. Weber, and X. Tu, and postdoctoral researcher, Dr. A. Bagri, for their contributions to various aspects presented in this chapter. He also acknowledges the sponsorship of the Air Force Office of Scientific Research, Air Force Research Laboratories (Program Manager A. Sayir), and Office of Naval Research (Program Manager W. Nickerson). Computing support by the Homewood High Performance Compute Cluster (HHPC) and Maryland Advanced Research Computing Center (MARCC) is gratefully acknowledged.

References

  1. Alam A, Eastman D, Jo M, Hemker KJ (2016) Development of a high-temperature tensile tester for micromechanical characterization of materials supporting meso-scale ICME models. JOM 11(68):2754–2760CrossRefGoogle Scholar
  2. Bagri A, G W, Stinville JC, Lenthe W, Pollock T, Woodward C, Ghosh S (2018, in press) Microstructure and property-based statistically equivalent representative volume elements for polycrystalline Ni-based superalloys containing annealing twins. Met Mat Trans AGoogle Scholar
  3. Baniassadi M, Garmestani H, Li DS, Ahzi S, Khaleel M, Sun X (2011) 3-phase solid oxide fuel cell anode microstructure realization using 2-point correlation functions. Acta Mat 59(1):30–43CrossRefGoogle Scholar
  4. Bhandari Y, Sarkar S, Groeber MA, Uchic MD, Dimiduk D, Ghosh S (2007) 3D polycrystalline microstructure reconstruction from FIB generated serial sections for FE Analysis. Comput Mat Sci 41:222–235CrossRefGoogle Scholar
  5. Busso E, Meissonier F, O’Dowd N (2000) Gradient-dependent deformation of two-phase single crystals. J Mech Phys Sol 48:2333–2361CrossRefADSGoogle Scholar
  6. Cai B, Adams B, Nelson T (2007) Relation between precipitate-free zone width and grain boundary type in 7075-T7 Al alloy. Acta Mat 55(5):1543–1553CrossRefGoogle Scholar
  7. Donegan SP, Tucker JC, Rollett A, Barmak K, Groeber MA (2013) Extreme value analysis of tail departure from log-normality in experimental and simulated grain size distributions. Acta Mat 61(15):5595–5604CrossRefGoogle Scholar
  8. Echlin MP, Lenthe WC, Pollock TM (2014) Three-dimensional sampling of material structure for property modeling and design. Integ Mat Manuf Innov 3(1):21CrossRefGoogle Scholar
  9. Fromm BS, Chang K, McDowell DL, Chen L, Garmestani H (2012) Linking phase-field and finite-element modeling for process-structure-property relations of a Ni-base superalloy. Acta Mat 60:5984–5999CrossRefGoogle Scholar
  10. Goldberg DE (1989) Genetic algorithms in search, optimization and machine learning. Addison-Wesley, ReadingzbMATHGoogle Scholar
  11. Groeber MA, Jackson M (2014) DREAM.3D: a digital representation environment for the analysis of microstructure in 3D. Integr Mat Manuf Innov 3:5Google Scholar
  12. Groeber MA, Haley BK, Uchic MD, Dimiduk D, Ghosh S (2006) 3D reconstruction and characterization of polycrystalline microstructures using a FIB-SEM system. Mat Char 57(4–5):259–273CrossRefGoogle Scholar
  13. Groeber MA, Ghosh S, Uchic MD, Dimiduk D (2008a) A framework for automated analysis and representation of 3D polycrystalline microstructures, part 1: statistical characterization. Acta Mat 56(6):1257–1273CrossRefGoogle Scholar
  14. Groeber MA, Ghosh S, Uchic MD, Dimiduk D (2008b) A framework for automated analysis and representation of 3D polycrystalline microstructures, part 2: synthetic structure generation. Acta Mat 56(6):1274–1287CrossRefGoogle Scholar
  15. Guo EY, Chawla N, Jing T, Torquato S, Jiao Y (2014) Accurate modeling and reconstruction of three-dimensional percolating filamentary microstructures from two-dimensional micrographs via dilation-erosion method. Mat Charac 89:33–42CrossRefGoogle Scholar
  16. Hasanabadi A, Baniassadi M, Abrinia K, Safdari M, Garmestani H (2016) 3D microstructural reconstruction of heterogeneous materials from 2D cross sections: a modified phase-recovery algorithm. Comput Mat Sci 111:107–115CrossRefGoogle Scholar
  17. Hill R (1963) Elastic properties of reinforced solids: some theoretical principles. J Mech Phys Sol 11(5):357–372CrossRefADSGoogle Scholar
  18. Jackson M (2018) DREAM.3D 6.4 Release. http://dream3d.bluequartz.net/?page_id=32
  19. Jiao Y, Stillinger FH, Torquato S (2007) Modeling heterogeneous materials via two-point correlation functions: basic principles. Phys Rev E 76(3):031110MathSciNetCrossRefADSGoogle Scholar
  20. Jiao Y, Padilla E, Chawla N (2013) Modeling and predicting microstructure evolution in lead/tin alloy via correlation functions and stochastic material reconstruction. Acta Mat 61(9): 3370–3377CrossRefGoogle Scholar
  21. Keshavarz S, Ghosh S (2015) Hierarchical crystal plasticity fe model for nickel-based superalloys: sub-grain microstructures to polycrystalline aggregates. Int J Solids Struct 55:17–31CrossRefGoogle Scholar
  22. Kumar A, Nguyen L, DeGraef M, Sundararaghavan V (2016) A Markov random field approach for microstructure synthesis. Model Simul Mater Sci Eng 24(3):035015CrossRefADSGoogle Scholar
  23. Lenthe W (2017) Twin related domains in polycrystalline nickel-base superalloys: 3d structure and fatigue. PhD thesis, University of California- Santa BarbaraGoogle Scholar
  24. Li CH, Lee CK (1993) Minimum cross entropy thresholding. Pattern Recogn 26(4):617–625CrossRefGoogle Scholar
  25. MacSleyne J, Uchic MD, Simmons JP, De Graef M (2009) Three-dimensional analysis of secondary γ’ precipitates in rené-88 DT and UMF-20 superalloys. Acta Mat 57(20):6251–6267CrossRefGoogle Scholar
  26. Massey FJ (1951) The Kolmogorov-Smirnov test for goodness of fit. J Am Stat Assoc 46(253): 68–78CrossRefGoogle Scholar
  27. McDowell D, Ghosh S, Kalidindi S (2011) Representation and computational structure-property relations of random media. JOM J Miner Met Mater Soc 63(3):45–51CrossRefGoogle Scholar
  28. Meyer F (1994) Topographic distance and watershed lines. Signal Process 38(1):113–125CrossRefGoogle Scholar
  29. Niezgoda S, Turner D, Fullwood D, Kalidindi S (2010) Optimized structure based representative volume element sets reflecting the ensemble-averaged 2-point statistics. Acta Mat 58:4432–4445CrossRefGoogle Scholar
  30. Nouailhas D, Cailletaud G (1996) Multiaxial behaviour of Ni-base single crystals. Scrip Mat 34:565–571CrossRefGoogle Scholar
  31. Ostoja-Starzewski M (2006) Material spatial randomness: from statistical to representative volume element. Prob Eng Mech 21(2):112–132MathSciNetCrossRefGoogle Scholar
  32. Parthasarathy TA, Rao SI, Dimiduk D (2004) A fast spreadsheet model for the yield strength of superalloys. In: Green KA, Pollock TM, Harada H, Howson TE, Reed RC, Schirra JJ, Walston S (eds) TMS (The Minerals, Metals & Materials Society), Superalloys, pp 887–896Google Scholar
  33. Pilchak A (2013) Fatigue crack growth rates in alpha titanium: faceted vs. striation growth. Scrip Mat 68(5):277–280CrossRefGoogle Scholar
  34. Pinz M, Weber G, Lenthe W, Uchic M, Pollock T, Woodward C, Ghosh S (2018, in press) Microstructure and property based statistically equivalent representative volume elements for modeling subgrain γ − γ′ microstructures in Ni-based superalloys. Acta MaterGoogle Scholar
  35. Pollock TM, Argon A (1992) Creep resistance of CMSX-3 Nickel-base superalloy single crystals. Acta Mat 40:1–30CrossRefGoogle Scholar
  36. Pollock TM, Tin S (2006) Nickel-based superalloys for advanced turbine engines: chemistry, microstructure and properties. J Propuls Power 22(2):361–374CrossRefGoogle Scholar
  37. Pyrz R (2006) Quantitative description of the microstructure of composites. part I: morphology of unidirectional composite systems. Comput Sci Technol 50(2):197–208CrossRefGoogle Scholar
  38. Rollett AD, Robert C, Saylor D (2006) Three dimensional microstructures: statistical analysis of second phase particles in AA7075-T651. Mater Sci Forum 519–521:1–10CrossRefGoogle Scholar
  39. Rollett AD, Lee SB, Campman R, Rohrer GS (2007) Three-dimensional characterization of microstructure by electron back-scatter diffraction. Annu Rev Mater Res 37:627–658CrossRefADSGoogle Scholar
  40. Saylor DM, Fridy J, El-Dasher BS, Jung KY, Rollett AD (2004) Statistically representative 3D microstructures based on orthogonal observation sections. Metall Mater Trans A 35:1969–1979CrossRefGoogle Scholar
  41. Sundararaghavan V, Zabaras N (2005) Classification and reconstruction of three-dimensional microstructures using support vector machines. Comput Mater Sci 32(2):223–239CrossRefGoogle Scholar
  42. Swaminathan S, Ghosh S (2006) Statistically equivalent representative volume elements for composite microstructures, part I: with interfacial debonding. J Compos Mater 40(7):605–621CrossRefGoogle Scholar
  43. Swaminathan S, Ghosh S, Pagano NJ (2006) Statistically equivalent representative volume elements for composite microstructures, part I: without damage. J Compos Mater 40(7): 583–604CrossRefGoogle Scholar
  44. Tewari A, Gokhale AM, Spowart JE, Miracle DB (2004) Quantitative characterization of spatial clustering in three-dimensional microstructures using two-point correlation functions. Acta Mater 52(2):307–319CrossRefGoogle Scholar
  45. Torquato S (2002) Random heterogeneous materials. Springer, New YorkCrossRefGoogle Scholar
  46. Tu X, Shahba A, Ghosh S (2018, in review) Microstructure and response-based statistically equivalent RVEs for 7000-series Aluminum alloysGoogle Scholar
  47. Turner TJ, Shade PA, Bernier JV, Li SF, Schuren JC, Kenesei P, Suter RM, Almer J (2017) Crystal plasticity model validation using combined high-energy diffraction microscopy data for a Ti-7Al specimen. Metall Mater Trans A 48:627–647CrossRefGoogle Scholar
  48. Uchic MD, Groeber MA, Dimiduk DM, Simmons JP (2006) 3D microstructural characterization of nickel superalloys via serial-sectioning using a dual beam FIB-SEM. Scripta Mat 55(1):23–28CrossRefGoogle Scholar
  49. Underwood E (1972) The mathematical foundations of quantitative stereology. In: Stereology and quantitative metallography. American Society for Testing and Materials, Philadelphia, pp 3–38CrossRefGoogle Scholar
  50. Unocic RR, Zhou N, Kovarik L, Shen C, Wang Y, Mills MJ (2011) Dislocation decorrelation and relationship to deformation microtwins during creep of a γ′ precipitate strengthened Ni-based superalloy. Acta Mater 59:7325–7339CrossRefGoogle Scholar
  51. Wang Q, Zhang H, Cai H, Fan Q, Zhang X (2016) Statistical three-dimensional reconstruction of co-continuous ceramic composites. Finite Elem Anal Des 114:85–91CrossRefGoogle Scholar
  52. Zhang C, Enomoto M, Suzuki A, Ishimaru T (2004) Characterization of three-dimensional grain structure in polycrystalline iron by serial sectioning. Metall Mater Trans A 35(7):1927–1933CrossRefGoogle Scholar

Copyright information

© Springer International Publishing AG, part of Springer Nature 2018

Authors and Affiliations

  1. 1.Departments of Civil, Mechanical and Materials Science & EngineeringJohns Hopkins UniversityBaltimoreUSA
  2. 2.Wright Patterson Air Force BaseAir Force Research LaboratoryDaytonUSA

Section editors and affiliations

  • Wei Cai
    • 1
  • Somnath Ghosh
    • 2
  1. 1.Department of Mechanical EngineeringStanford UniversityStanfordUSA
  2. 2.Dept. of Mechanical EngineeringJohns Hopkins UniveristyBaltimoreUSA

Personalised recommendations