Skip to main content
SpringerLink
Log in
Book cover

CIRP Encyclopedia of Production Engineering pp 1–9Cite as

Deep Hole Drilling with Small Diameters

  • Living reference work entry
  • First Online:

Synonyms

Micromachining; Micro deep hole drilling

Definition

In the field of machining technology, the processes of deep hole drilling are defined for drilled boreholes with a length-to-diameter ratio of more than lt/D = 3 (VDI 3210), whereas in the industry deep hole drilling processes are often defined for drilling with length-to-diameter ratios of more than lt/D = 10, because conventional drilling tools are available up to this ratio. The field of deep hole drilling with small diameters or micro deep hole drilling is known as deep hole drilling with gun drills featuring a tool diameter smaller than d = 2 mm. In some cases deep hole drilling with tools smoothly bigger than d = 2 mm is also described as deep hole drilling with small diameters. For the production of deep holes with small diameters, there is a range of manufacturing processes existing, which differ with respect to the possible hole dimensions and quality, repeatability, processing times, as well as the economic...

This is a preview of subscription content, log in via an institution.

References

  • Alting L, Kimura F, Hansen HN, Bissacco G (2003) Micro engineering. CIRP Ann Manuf Technol (2):635–657

    Google Scholar 

  • Dausinger F (2001) Laserverfahren für Tieflochbohrungen im Mikrometerbereich (Laser processes for microdeep hole drilling). wt Werkstatttechnik online 1:20–24

    Google Scholar 

  • Dausinger F (2004) Präsisionsbohren mit kurzen und ultrakurzen laserpulsen (Laser drilling using short and ultra-short pulsed laser systems). Laser Technik J 1:40–44

    Article  Google Scholar 

  • DIN ISO 5419 (1998) Spiralbohrer – benennungen, definitionen und formen (Twist drills – designations, definitions and geometries). Beuth, Berlin

    Google Scholar 

  • Dornfeld D, Min S, Takeuchi Y (2008) Recent advances in mechanical micromachining. CIRP Ann Manuf Technol 2:745–768

    Google Scholar 

  • Eichler R (1996) ProzeßsicherheitbeimEinlippenbohrenmitkleinstenDurchmessern (Process stability in single lip deep hole drilling with small diameters). Dissertation, Universität Stuttgart

    Google Scholar 

  • Fink P (1977) Spanbildung und Bohrungsqualität beim Tiefbohren (Chip formation and hole quality in deep hole drilling). Dissertation, Universität Stuttgart

    Google Scholar 

  • Heilmann M (2012) Tiefbohren mit kleinen Durchmessern durch mechanische und thermische Verfahren (Microdeep hole drilling using mechanical and thermal removal mechanisms). Dissertation, Technische Universität Dortmund

    Google Scholar 

  • ISO 3292 (2004) Extra-long parallel shank twist drills

    Google Scholar 

  • Lehner C, Kaiser E (2003) Laserbohren von Kühl- und Schmierlöchern (Laser drilling of cooling and lubrication holes). WB Werkstatt Betrieb 6:59–61

    Google Scholar 

  • Migliore L, Kardos G (2004) Laser choices for micromachining: drilling speed and quality comparison. In: LIA proceedings ICALEO, San Francisco

    Google Scholar 

  • Okasha MM, Mativenga PT, Driver N, Li L (2010) Sequential laser and mechanical micro-drilling of Ni superalloy for aerospace application. CIRP Ann Manuf Technol (1):199–202

    Google Scholar 

  • Pfleghar F (1976) Verbesserung der Bohrungsqualität beim Arbeiten mit Einlippen- tiefbohrwerkzeugen (Optimization of the bore in gun drilling processes). Dissertation, Universität Stuttgart

    Google Scholar 

  • Poprawe R (2005) Lasertechnik für die Fertigung–Grundlagen, Perspektiven und Beispiele für den innovativen Ingenieur (Laser technology for manufacturing processes – basics, perspectives and examples for innovative engineers). Springer, Berlin

    Google Scholar 

  • Streicher P (1973) Langschäftige Werkzeuge zum Tiefbohren–Ihre Problematik und deren Bewältigung (Long shanked tools for deep hole drilling – challenges and Solutions). Dissertation, Universität Stuttgart

    Google Scholar 

  • VDI-Richtlinie 3208-Entwurf (2009) Tiefbohren mit Einlippenbohrern (Deep hole drilling with gun drills). Beuth, Berlin

    Google Scholar 

  • VDI-Richtlinie 3210, Blatt 1 (2006) Tiefbohrverfahren (Deep hole drilling). Beuth, Berlin

    Google Scholar 

  • VDI-Richtlinie 3211-Entwurf (2011) Tiefbohren auf Bearbeitungszentren (Deep hole drilling on machining centers). Beuth, Berlin

    Google Scholar 

  • Zabel A, Heilmann M (2012) Deep hole drilling using tools with small diameters – process analysis and process design. CIRP Ann Manuf Technol 61:111–114

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Institute of Machining Technology (ISF), TU Dortmund University, Dortmund, Germany

    Andreas Zabel

Authors
  1. Andreas Zabel
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Andreas Zabel .

Editor information

Editors and Affiliations

  1. Engineering, paris, France

    The International Academy for Production

Section Editor information

  1. Trinity College Dublin, Dublin, Ireland

    Garret O'Donnell

Rights and permissions

Reprints and permissions

Copyright information

© 2018 CIRP

About this entry

Check for updates. Verify currency and authenticity via CrossMark

Cite this entry

Zabel, A. (2018). Deep Hole Drilling with Small Diameters. In: The International Academy for Production (eds) CIRP Encyclopedia of Production Engineering. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-35950-7_16683-5

Download citation

  • DOI: https://doi.org/10.1007/978-3-642-35950-7_16683-5

  • Received:

  • Accepted:

  • Published:

  • Publisher Name: Springer, Berlin, Heidelberg

  • Print ISBN: 978-3-642-35950-7

  • Online ISBN: 978-3-642-35950-7

  • eBook Packages: Springer Reference EngineeringReference Module Computer Science and Engineering

Publish with us

Policies and ethics

Societies and partnerships

Search

Navigation