Abstract
Beside other requirements, the mechanical behavior plays an important role in the success of vascular grafts. For the development, quality control, and assessment of vascular grafts, precise and predictive mechanical characterization is essential. Today’s technology offers a wide range of mechanical tests for various applications. The selection of the proper test method out of these numerous options is a challenging task, because different scientific questions and issues require different testing methods. In this chapter, an overview and review of important methods with numerous relevant references for the mechanical characterization of vascular grafts is given. In addition, a classification of the testing methods according to the measurement purpose is presented. Special attention is paid to dynamic measurement techniques, which are more close to the target application. Challenges and possibilities of these measurement methods are demonstrated and discussed. This shall form a basis to assess one’s own needs and to help at the selection process to find the most suitable testing methods.
This is a preview of subscription content, log in via an institution.
References
ASTM Standard D1388-96 (1996) Standard test method for stiffness of fabrics. ASTM International, West Conshohocken
ASTM Standard D2290-00 (2000) Standard test method for apparent hoop tensile strength of plastic or reinforced plastic pipe by split disk method. ASTM International, West Conshohocken. https://doi.org/10.1520/D2290-08.2
ASTM Standard D3039-00 (2000) Standard test method for tensile properties of polymer matrix composite materials. ASTM International, West Conshohocken. https://doi.org/10.1520/D3039_D3039M-08
ASTM Standard D2290-01 (2001) Standard test methods for tensile, compressive, and flexural creep and creep-rupture of plastics. ASTM International, West Conshohocken. https://doi.org/10.1520/D2990-09.2
ASTM Standard D5026-01 (2001) Standard test method for plastics: dynamic mechanical properties: in tension. ASTM International, West Conshohocken. https://doi.org/10.1520/D5026-06R14.1
ASTM Standard D1938-02 (2002) Tear-propagation resistance of plastic film and thin sheeting by a single-tear method. ASTM International, West Conshohocken. https://doi.org/10.1520/D1922-15.2
ASTM Standard D638-02a (2002) Standard test method for tensile properties of plastics. ASTM International, West Conshohocken. https://doi.org/10.1520/D0638-14.1
ASTM Standard D882-02 (2002) Standard test method for tensile properties of thin plastic sheeting. ASTM International, West Conshohocken. https://doi.org/10.1520/D0882-12
ASTM Standard F1980-02 (2002) Standard guide for accelerated aging of sterile medical device packages. ASTM International, West Conshohocken. https://doi.org/10.1520/D7102-10.Copyright
ASTM Standard F2150-13 (2013) Standard guide for characterization and testing of biomaterial scaffolds used in tissue-engineered medical products. ASTM International, West Conshohocken. https://doi.org/10.1520/F2150-07.Copyright
Avril S, Evans S (2017) Material Parameter Identification and Inverse Problems in Soft Tissue Biomechanics [Internet]. Springer International Publishing, pp 37–67. Available from: https://link.springer.com/book/10.1007%2F978-3-319-45071-1
Awad NK, Niu H, Ali U et al (2018) Electrospun fibrous scaffolds for small-diameter blood vessels: a review. Membranes (Basel) 8:1–26. https://doi.org/10.3390/membranes8010015
Bäck M, Gasser TC, Michel J-B, Caligiuri G (2013) Biomechanical factors in the biology of aortic wall and aortic valve diseases. https://doi.org/10.1093/cvr/cvt040
Baxter J, Buchan KG, Espino DM (2017) Viscoelastic properties of mitral valve leaflets: an analysis of regional variation and frequency-dependency. Proc Inst Mech Eng Part H J Eng Med 231:938–944. https://doi.org/10.1177/0954411917719741
Bensch M, Müller M, Bode M, Glasmacher B (2016) Automation of a test bench for accessing the bendability of electrospun vascular grafts. Curr Dir Biomed Eng 2:3–7. https://doi.org/10.1515/cdbme-2016-0068
Bergmeister H, Schreiber C, Grasl C et al (2013) Healing characteristics of electrospun polyurethane grafts with various porosities. Acta Biomater 9:6032–6040. https://doi.org/10.1016/j.actbio.2012.12.009
Bernal M, Urban MW, Rosario D et al (2011) Measurement of biaxial mechanical properties of soft tubes and arteries using piezoelectric elements and sonometry. Phys Med Biol 56:3371–3386. https://doi.org/10.1088/0031-9155/56/11/012
Biemans JMA, Van Den Berg JC, Moll FL (2002) Beware the kinking bypass – a hidden cause of graft reocclusion. EJVES Extra 3:88–90. https://doi.org/10.1053/ejvx.2002.0145
Bode M, Mueller M, Zernetsch H, Glasmacher B (2015) Electrospun vascular grafts with anti-kinking properties. Curr Dir Biomed Eng 1:524–528. https://doi.org/10.1515/cdbme-2015-0125
Brandt-Wunderlich C, Schwerdt C, Behrens P et al (2016) A method to determine the kink resistance of stents and stent delivery systems according to international standards. Curr Dir Biomed Eng 2:289–292. https://doi.org/10.1515/cdbme-2016-0064
Brown RP (2002) Handbook of polymer testing: short-term mechanical tests. Rapra Technology, Shrewsbury
Browning MB, Dempsey D, Guiza V et al (2012) Multilayer vascular grafts based on collagen-mimetic proteins. Acta Biomater 8:1010–1021. https://doi.org/10.1016/j.actbio.2011.11.015
Burton HE, Freij JM, Espino DM (2017) Dynamic viscoelasticity and surface properties of porcine left anterior descending coronary arteries. Cardiovasc Eng Technol 8:41–56. https://doi.org/10.1007/s13239-016-0288-4
Caro-Bretelle AS, Gountsop PN, Ienny P et al (2015) Effect of sample preservation on stress softening and permanent set of porcine skin. J Biomech 48:3135–3141. https://doi.org/10.1016/j.jbiomech.2015.07.014
Carson MW, Roach MR (1990) The strength of the aortic media and its role in the propagation of aortic dissection. J Biomech 23:579–588. https://doi.org/10.1016/0021-9290(90)90050-D
Chaparro FJ, Matusicky ME, Allen MJ, Lannutti JJ (2016) Biomimetic microstructural reorganization during suture retention strength evaluation of electrospun vascular scaffolds. J Biomed Mater Res Part B Appl Biomater 104:1525–1534. https://doi.org/10.1002/jbm.b.33493
Chirinos JA (2012) Arterial stiffness: basic concepts and measurement techniques. J Cardiovasc Transl Res 5:243–255. https://doi.org/10.1007/s12265-012-9359-6
Chuong CJ, Fung YC (1983) Three-dimensional stress distribution in arteries. J Biomech Eng 105:268. https://doi.org/10.1115/1.3138417
Claramunt R, Álvarez-Ayuso L, García-Páez JM et al (2013) Changes in the mechanical properties of chemically treated bovine pericardium after a short uniaxial cyclic test. Artif Organs 37:183–188. https://doi.org/10.1111/j.1525-1594.2012.01538.x
Collins MJ, Li X, Lv W et al (2012) Therapeutic strategies to combat neointimal hyperplasia in vascular grafts. Expert Rev Cardiovasc Ther 10:635–647. https://doi.org/10.1586/erc.12.33
Czichos H, Saito T, Smith LR (2006) Springer handbook of materials measurement methods. Springer, New York
David SJ (1999) Dynamic mechanical analysis of polymeric systems of pharmaceutical and biomedical significance. Int J Pharm 179:167–178. https://doi.org/10.1016/S0378-5173(98)00337-8
de Gelidi S, Tozzi G, Bucchi A (2017) The effect of thickness measurement on numerical arterial models. Mater Sci Eng C 76:1205–1215. https://doi.org/10.1016/j.msec.2017.02.123
De Korte CL, Van Der Steen AFW (2002) Intravascular ultrasound elastography: an overview. Ultrasonics 40:859–865. https://doi.org/10.1016/S0041-624X(02)00227-5
Diamantouros SE, Hurtado-Aguilar LG, Schmitz-Rode T et al (2013) Pulsatile perfusion bioreactor system for durability testing and compliance estimation of tissue engineered vascular grafts. Ann Biomed Eng 41:1979–1989. https://doi.org/10.1007/s10439-013-0823-5
Disney CM, Lee PD, Hoyland JA et al (2018) A review of techniques for visualising soft tissue microstructure deformation and quantifying strain Ex Vivo. J Microsc 00:1–15. https://doi.org/10.1111/jmi.12701
Dobrin PB, Hodgett D, Canfield T, Mrkvicka R (2001) Mechanical determinants of graft kinking. Ann Vasc Surg 15:343–349. https://doi.org/10.1007/s10016001
Duprey A, Khanafer K, Schlicht M et al (2010) In vitro characterisation of physiological and maximum elastic Modulus of ascending thoracic aortic aneurysms using uniaxial tensile testing. Eur J Vasc Endovasc Surg 39:700–707. https://doi.org/10.1016/j.ejvs.2010.02.015
Fulcher GR, Hukins DWL, Shepherd DET (2009) Viscoelastic properties of bovine articular cartilage attached to subchondral bone at high frequencies. BMC Musculoskelet Disord 10:1–7. https://doi.org/10.1186/1471-2474-10-61
Fung YC (Yuan-cheng) (1993) Biomechanics: mechanical properties of living tissues. Springer, New York
Garcia JR, Lamm SD, Han HC (2013) Twist buckling behavior of arteries. Biomech Model Mechanobiol 12:915–927. https://doi.org/10.1007/s10237-012-0453-0
Gasser TC, Ogden RW, Holzapfel GA (2006) Hyperelastic modelling of arterial layers with distributed collagen fibre orientations. J R Soc Interface 3:15–35. https://doi.org/10.1098/rsif.2005.0073
Gauvin R, Sc M, Ahsan T et al (2010) A novel single-step self-assembly approach for the fabrication of tissue-engineered. Tissue Eng Part A 16:1737–1747
Gleason RL, Gray SP, Wilson E, Humphrey JD (2004) A multiaxial computer-controlled organ culture and biomechanical device for mouse carotid arteries. J Biomech Eng 126:787. https://doi.org/10.1115/1.1824130
Greenwald SE, Berry CL (2000) Improving vascular grafts: the importance of mechanical and haemodynamic properties. J Pathol 190:292–299. https://doi.org/10.1002/(SICI)1096-9896(200002)190:3<292::AID-PATH528>3.0.CO;2-S
Haslach HW, Siddiqui A, Weerasooriya A et al (2018) Fracture mechanics of shear crack propagation and dissection in the healthy bovine descending aortic media. Acta Biomater. https://doi.org/10.1016/j.actbio.2017.12.027
Hemmasizadeh A, Darvish K, Autieri M (2013) Characterization of changes to the mechanical properties of arteries due to cold storage using nanoindentation tests. Ann Biomed Eng 40:1434–1442. https://doi.org/10.1007/s10439-011-0506-z.Characterization
Hinnen JW, Rixen DJ, Koning OHJ et al (2007) Development of fibrinous thrombus analogue for in-vitro abdominal aortic aneurysm studies. J Biomech 40:289–295. https://doi.org/10.1016/j.jbiomech.2006.01.010
Holzapfel GA (2006) Determination of material models for arterial walls from uniaxial extension tests and histological structure. J Theor Biol 238:290–302. https://doi.org/10.1016/j.jtbi.2005.05.006
Holzapfel GA, Ogden RW (2010) Constitutive modelling of arteries. Proc R Soc A Math Phys Eng Sci 466:1551–1597. https://doi.org/10.1098/rspa.2010.0058
Holzapfel GA, Gasser TC, Ogden RW (2000) A new constitutive framework for arterial wall mechanics and a comparative study of material models. J Elast 61:1–48. https://doi.org/10.1023/A:1010835316564
Holzapfel GA, Gasser TC, Stadler M (2002) A structural model for the viscoelastic behavior of arterial walls: continuum formulation and finite element analysis. Eur J Mech A Solids 21:441–463
Hosseini SM, Wilson W, Ito K, van Donkelaar CC (2013) How preconditioning affects the measurement of poro-viscoelastic mechanical properties in biological tissues. Biomech Model Mechanobiol. https://doi.org/10.1007/s10237-013-0511-2
Hosseini SM, Wilson W, Ito K, Van Donkelaar CC (2014) How preconditioning affects the measurement of poro-viscoelastic mechanical properties in biological tissues. Biomech Model Mechanobiol 13:503–513. https://doi.org/10.1007/s10237-013-0511-2
Hsu FPK, Liu AMC, Downs J et al (1995) A triplane video-based experimental system for studying axisymmetrically inflated biomembranes. IEEE Trans Biomed Eng 42:442–450. https://doi.org/10.1109/10.376148
Huang AH, Niklason LE (2014) Engineering of arteries in vitro. Cell Mol Life Sci 71:2103–2118. https://doi.org/10.1007/s00018-013-1546-3
International Standard ISO 5840-3 (2013) Cardiovascular implants – cardiac valve prostheses – part 3: heart valve substitutes implanted by transcatheter techniques. International Organization for Standardization, Geneva
International Standard ISO 7198:2016 (2016) Cardiovascular implants – tubular vascular prostheses. International Organization Standards, Genève
ISO/DIS 6721-1:2018 (2018) Plastics – determination of dynamic mechanical properties – part 1: general principles
James BA, Sire RA (2010) Fatigue-life assessment and validation techniques for metallic vascular implants. Biomaterials 31:181–186. https://doi.org/10.1016/j.biomaterials.2009.10.028
Kanapathy M, Kalaskar D, Mosahebi A, Seifalian AM (2016) Development of a tissue-engineered lymphatic graft using nanocomposite polymer for the treatment of secondary lymphedema. Artif Organs 40:E1–E11. https://doi.org/10.1111/aor.12604
Konig G, McAllister TN, Dusserre N et al (2009) Mechanical properties of completely autologous human tissue engineered blood vessels compared to human saphenous vein and mammary artery. Biomaterials 30:1542–1550. https://doi.org/10.1016/j.biomaterials.2008.11.011
Koop BE, Lewis JL (2003) A model of fracture testing of soft viscoelastic tissues. J Biomech 36:605–608. https://doi.org/10.1016/S0021-9290(02)00435-9
L’Heureux N, Dusserre N, Marini A et al (2007) Technology insight: the evolution of tissue-engineered vascular grafts – from research to clinical practice. Nat Clin Pract Cardiovasc Med 4:389–395. https://doi.org/10.1038/ncpcardio0930
Laterreur V, Ruel J, Auger FA et al (2014) Comparison of the direct burst pressure and the ring tensile test methods for mechanical characterization of tissue-engineered vascular substitutes. J Mech Behav Biomed Mater 34:253–263. https://doi.org/10.1016/j.jmbbm.2014.02.017
Lee J-H, Lee S-S, Chang J-D et al (2013) A novel method for the accurate evaluation of Poisson’s ratio of soft polymer materials. Sci World J 2013:1–7. https://doi.org/10.1155/2013/930798
Li GY, Cao Y (2017) Mechanics of ultrasound elastography. Proc R Soc A Math Phys Eng Sci 473. https://doi.org/10.1098/rspa.2016.0841
Loy C, Pezzoli D, Candiani G, Mantovani D (2018) A cost-effective culture system for the in vitro assembly, maturation, and stimulation of advanced multilayered multiculture tubular tissue models. Biotechnol J 13:1–9. https://doi.org/10.1002/biot.201700359
Macrae RA, Miller K, Doyle BJ (2016) Methods in mechanical testing of arterial tissue: a review. Strain 52:380–399. https://doi.org/10.1111/str.12183
Mahmood B, Ewertsen C, Carlsen J, Nielsen M (2016) Ultrasound vascular elastography as a tool for assessing atherosclerotic plaques – a systematic literature review. Ultrasound Int Open 02:E106–E112. https://doi.org/10.1055/s-0042-115564
Mariappan YK, Glaser KJ, Ehman RL (2010) Magnetic resonance elastography: a review. Clin Anat 23:497–511. https://doi.org/10.1002/ca.21006
Marra SP, Kennedy FE, Kinkaid JN, Fillinger MF (2006) Elastic and rupture properties of porcine aortic tissue measured using inflation testing. Cardiovasc Eng 6:123–131. https://doi.org/10.1007/s10558-006-9021-5
Maurel W, Thalmann D, Wu Y et al (1998) Biomechanical models for soft tissue simulation. Springer, Berlin
McClure MJ, Simpson DG, Bowlin GL (2012) Tri-layered vascular grafts composed of polycaprolactone, elastin, collagen, and silk: optimization of graft properties. J Mech Behav Biomed Mater 10:48–61. https://doi.org/10.1016/j.jmbbm.2012.02.026
Menard KP, Menard N (2017) Dynamic mechanical analysis. Encycl Anal Chem Online 2–25. https://doi.org/10.1002/9780470027318.a2007.pub3
Mugnai D, Tille JC, Mrówczyński W et al (2013) Experimental noninferiority trial of synthetic small-caliber biodegradable versus stable vascular grafts. J Thorac Cardiovasc Surg 146. https://doi.org/10.1016/j.jtcvs.2012.09.054
Natasha G, Tan A, Gundogan B et al (2015) Tissue engineering vascular grafts a fortiori: looking back and going forward. Expert Opin Biol Ther 15:231–244. https://doi.org/10.1517/14712598.2015.980234
Nerem RM (2000) Tissue engineering a blood vessel substitute: the role of biomechanics. Yonsei Med J 41:735–739
Nezarati RM, Eifert MB, Dempsey DK, Cosgriff-Hernandez E (2014) Electrospun vascular grafts with improved compliance matching to native vessels. J Biomed Mater Res B Appl Biomater:1–11. https://doi.org/10.1002/jbm.b.33201
Ng BH, Chou SM, Krishna V (2005) The influence of gripping techniques on the tensile properties of tendons. Proc Inst Mech Eng Part H J Eng Med 219:349–354. https://doi.org/10.1243/095441105X34239
Nieponice A, Soletti L, Guan J et al (2008) Rotational vacuum seeding technique. Glass 29:825–833. https://doi.org/10.1016/j.biomaterials.2007.10.044.Development
O’Brien FJ (2011) Biomaterials & scaffolds for tissue engineering. Mater Today 14:88–95. https://doi.org/10.1016/S1369-7021(11)70058-X
O’Leary SA, Doyle BJ, McGloughlin TM (2014) The impact of long term freezing on the mechanical properties of porcine aortic tissue. J Mech Behav Biomed Mater 37:165–173. https://doi.org/10.1016/j.jmbbm.2014.04.015
Obaid N, Kortschot MT, Sain M (2017) Understanding the stress relaxation behavior of polymers reinforced with short elastic fibers. Materials (Basel) 10:1–15. https://doi.org/10.3390/ma10050472
Pensalfini M, Meneghello S, Lintas V et al (2018) The suture retention test, revisited and revised. J Mech Behav Biomed Mater 77:711–717. https://doi.org/10.1016/j.jmbbm.2017.08.021
Peterson DR, Bronzino JD (2008) Biomechanics: principles and applications. CRC Press, Boca Raton
Purslow PP (1983) Measurement of the fracture toughness of extensible connective tissues. J Mater Sci 18:3591–3598. https://doi.org/10.1007/BF00540731
Rectors T, Madrid MGV, General TS et al (2003) Biomechanics of soft tissue in cardiovascular systems. Springer, Wien
Roeder RK (2013) Mechanical characterization of biomaterials. Elsevier, Amsterdam
Romo A, Badel P, Duprey A et al (2014) In vitro analysis of localized aneurysm rupture. J Biomech 47:607–616. https://doi.org/10.1016/j.jbiomech.2013.12.012
Sacks MS (2000) Biaxial mechanical evaluation of planar biological materials. In: Cardiovascular soft tissue mechanics. Kluwer Academic Publishers, Dordrecht, pp 199–246
Sarkar S, Hillery C, Seifalian A, Hamilton G (2006) Critical parameter of burst pressure measurement in development of bypass grafts is highly dependent on methodology used. J Vasc Surg 44:846–852. https://doi.org/10.1016/j.jvs.2006.07.023
Sarvazyan A, Hall TJ, Urban W et al (2011) An overview of elastography-an emerging branch of medical imaging. Curr Med Imaging Rev 7:255–282. https://doi.org/10.2174/157340511798038684
Schindler HJ (2005) On quasi-non-destructive strength and toughness testing of elastic-plastic materials. Int J Solids Struct 42:717–725. https://doi.org/10.1016/j.ijsolstr.2004.06.029
Shah RG, Pierce MC, Silver FH (2017) Morphomechanics of dermis-A method for non-destructive testing of collagenous tissues. Skin Res Technol 23:399–406. https://doi.org/10.1111/srt.12349
Soffer L, Wang X, Zhang X et al (2009) Silk-based electrospun tubular scaffolds for tissue-engineered vascular grafts. J Biomater Sci Polym 19:653–664. https://doi.org/10.1163/156856208784089607.Silk-Based
Sokolis DP (2007) Passive mechanical properties and structure of the aorta: segmental analysis. Acta Physiol 190:277–289. https://doi.org/10.1111/j.1748-1716.2006.01661.x
Soletti L, Hong Y, Guan J et al (2011) A bi-layered elastomeric scaffold for tissue engineering of small-diameter vascular grafts. Acta Biomater 6:110–122. https://doi.org/10.1016/j.actbio.2009.06.026.A
Stemper BD, Yoganandan N, Stineman MR et al (2007) Mechanics of fresh, refrigerated, and frozen arterial tissue. J Surg Res 139:236–242. https://doi.org/10.1016/j.jss.2006.09.001
Stoiber M, Messner B, Grasl C et al (2015) A method for mechanical characterization of small blood vessels and vascular grafts. Exp Mech 55:1591–1595. https://doi.org/10.1007/s11340-015-0053-x
Sun W, Sacks MS, Scott MJ (2005) Effects of boundary conditions on the estimation of the planar biaxial mechanical properties of soft tissues. J Biomech Eng 127:709. https://doi.org/10.1115/1.1933931
Takmakov P, Ruda K, Phillips KS et al (2017) Rapid evaluation of the durability of cortical neural implants using accelerated aging with reactive oxygen species. J Neural Eng 12:1–29. https://doi.org/10.1088/1741-2560/12/2/026003.Rapid
Tanzi MC, Farè S (2017) Characterization of polymeric biomaterials. Woodhead Publishing, Cambridge
Theron JP, Knoetze JH, Sanderson RD et al (2010) Modification, crosslinking and reactive electrospinning of a thermoplastic medical polyurethane for vascular graft applications. Acta Biomater 6:2434–2447. https://doi.org/10.1016/j.actbio.2010.01.013
Thubrikar MJ, Labrosse M, Robicsek F et al (2001) Mechanical properties of abdominal aortic aneurysm wall. J Med Eng Technol 25:133–142. https://doi.org/10.1080/0309190011005780
Tian L, Henningsen J, Salick MR et al (2014) Stretch calculated from grip distance accurately approximates mid-specimen stretch in large elastic arteries in uniaxial tensile tests. J Mech Behav Biomed Mater 47:107–113. https://doi.org/10.1016/j.jmbbm.2015.03.016
Tonge TK, Murienne BJ, Coudrillier B et al (2013) Minimal preconditioning effects observed for inflation tests of planar tissues. J Biomech Eng 135:114502. https://doi.org/10.1115/1.4025105
Vaesken A, Heim F, Chakfe N (2014) Fiber heart valve prosthesis: influence of the fabric construction parameters on the valve fatigue performances. J Mech Behav Biomed Mater 40:69–74. https://doi.org/10.1016/j.jmbbm.2014.08.015
Valdez-Jasso D, Bia D, Zócalo Y et al (2011) Linear and nonlinear viscoelastic modeling of aorta and carotid pressure-area dynamics under in vivo and ex vivo conditions. Ann Biomed Eng 39:1438–1456. https://doi.org/10.1007/s10439-010-0236-7
van Haaften EE, Wissing TB, Rutten M et al (2018) Decoupling the effect of shear stress and stretch on tissue growth & remodeling in a vascular graft. Tissue Eng Part C Methods 24:ten.TEC.2018.0104. https://doi.org/10.1089/ten.TEC.2018.0104
VanBavel E, Siersma P, Spaan J a E (2003) Elasticity of passive blood vessels: a new concept. Am J Physiol Heart Circ Physiol 285:H1986–H2000. https://doi.org/10.1152/ajpheart.00248.2003
Virues Delgadillo JO, Delorme S, El-Ayoubi R et al (2010) Effect of freezing on the passive mechanical properties of arterial samples. J Biomed Sci Eng 03:645–652. https://doi.org/10.4236/jbise.2010.37088
Vorp DA, Severyn DA, Steed DL, Webster MW (1996) A device for the application of cyclic twist and extension on perfused vascular segments. Am J Phys 270:H787–H795
Waldman SD, Lee JM (2005) Effect of sample geometry on the apparent biaxial mechanical behaviour of planar connective tissues. Biomaterials 26:7504–7513. https://doi.org/10.1016/j.biomaterials.2005.05.056
Wan W, Dixon JB, Gleason RL (2012) Constitutive modeling of mouse carotid arteries using experimentally measured microstructural parameters. Biophys J 102:2916–2925. https://doi.org/10.1016/j.bpj.2012.04.035
Wang XT, Ker RF, Alexander RM (1995) Fatigue rupture of wallaby tail tendons. J Exp Biol 198:847–852. https://doi.org/10.1016/J.JBIOMECH.2007.05.005
Wang F, Mohammed A, Li C et al (2014) Degradable/non-degradable polymer composites for in-situ tissue engineering small diameter vascular prosthesis application. Biomed Mater Eng 24:2127–2133. https://doi.org/10.3233/BME-141023
Woodrum DA, Romano AJ, Lerman A et al (2006) Vascular wall elasticity measurement by magnetic resonance imaging. Magn Reson Med 56:593–600. https://doi.org/10.1002/mrm.20991
Yu X, Turcotte R, Seta F, Zhang Y (2018) Micromechanics of elastic lamellae: unravelling the role of structural inhomogeneity in multi-scale arterial mechanics. J R Soc Interface 15:20180492. https://doi.org/10.1098/rsif.2018.0492
Zou Y, Zhang Y (2011) The orthotropic viscoelastic behavior of aortic elastin. Biomech Model Mechanobiol 10:613–625. https://doi.org/10.1007/s10237-010-0260-4
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this entry
Cite this entry
Stoiber, M., Grasl, C., Moscato, F., Schima, H. (2020). Mechanical Testing of Vascular Grafts. In: Walpoth, B., Bergmeister, H., Bowlin, G., Kong, D., Rotmans, J., Zilla, P. (eds) Tissue-Engineered Vascular Grafts. Reference Series in Biomedical Engineering(). Springer, Cham. https://doi.org/10.1007/978-3-319-71530-8_3-1
Download citation
DOI: https://doi.org/10.1007/978-3-319-71530-8_3-1
Received:
Accepted:
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-71530-8
Online ISBN: 978-3-319-71530-8
eBook Packages: Springer Reference EngineeringReference Module Computer Science and Engineering