Abstract
Controlling the mechanical integrity of metal/ceramic interfaces is important for a wide range of technological applications. Achievement of such control requires a number of key elements, including establishing appropriate experimental protocols for quantifying mechanical response of metal/ceramic interfacial regions under well-defined loading conditions, understanding how interfacial compositional and structural characteristics impact such interfacial mechanical response, and elucidating unit interface physics and predicting interfacial mechanical response via development of multiscale physics-based models. Achieving this combined testing, understanding, and modeling will ultimately lead to effective control of mechanical integrity of metal/ceramic interfaces and true interfacial engineering through targeted modification of the interfacial composition and structure.
Major breakthroughs in the improvement of interfacial mechanical integrity can be enabled by understanding and controlling key physical factors, including interfacial architectural and chemical features governing the mechanical response of metal/ceramic interfacial regions (MCIRs), thus leading to unprecedented interfacial mechanical performance that meets/exceeds the demands of future applications. Guided by a multiscale integrated computational materials engineering (ICME) framework, the mechanical integrity of MCIRs can be substantially improved by a variety of architectural and chemical enhancements/refinements. Recent research efforts by the authors aim to provide a fundamental, physics-based understanding of the failure mechanisms of MCIRs by constructing a novel, multiscale, computation-guided, and experiment-validated ICME framework. Interfacial refinements to be explored within this framework include addition of alloying impurities as well as geometrical features such as multilayered and stepped interfacial architectures. The findings can then be consolidated into a high fidelity, experiment-validated, micro- and mesoscale modeling tool to significantly accelerate the discovery-design-implementation cycle of advanced MCIRs. In this chapter, we summarize some preliminary results on shear failure and instability of various metal/ceramic interfacial regions, outline the theoretical background of this research thrust, and identify challenges and opportunities in this area.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
F. Akasheh, H.M. Zbib, J.P. Hirth, R.G. Hoagland, A. Misra, Dislocation dynamics analysis of dislocation intersections in nanoscale metallic multilayered composites. J. Appl. Phys. 101, 084314 (2007). https://doi.org/10.1063/1.2721093
ASTM International, ASTM D2095 Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod, Annu. B. ASTM Stand. 15 (2002), pp. 1–3. https://doi.org/10.1520/D2095-96R15.2
ASTM International, ASTM D1002-05: Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading ( Metal-To-Metal), Standards (2005), pp. 1–5. https://doi.org/10.1520/D1002-10.on
ASTM International, ASTM D3165-07 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies (2007), p. 4. https://doi.org/10.1520/D3165-07
ASTM International, ASTM D897 Standard Test Method for Tensile Properties of Adhesive Bonds (ASTM International, West Conshohocken, 2012), pp. 24–26. https://doi.org/10.1520/D0897-08R16
ASTM International, Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by (ASTM International, 2013). https://doi.org/10.1520/D3528-96R08.2
ASTM International, ASTM D4541-17: Standard Test Method for Pull-off Strength of Coatings Using Portable Adhesion Testers (ASTM international, 2014), pp. 1–16. https://doi.org/10.1520/D4541-09E01
ASTM International, ASTM C1624-05: Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing (ASTM international, 2015)
M. Benoit, N. Tarrat, J. Morillo, Density functional theory investigations of titanium γ -surfaces and stacking faults. Model. Simul. Mater. Sci. Eng. 21, 015009 (2013). https://doi.org/10.1088/0965-0393/21/1/015009
I.J. Beyerlein, J. Wang, R. Zhang, Interface-dependent nucleation in nanostructured layered composites. APL Mater. 1 (2013a). https://doi.org/10.1063/1.4820424
I.J. Beyerlein, J. Wang, R. Zhang, Mapping dislocation nucleation behavior from bimetal interfaces. Acta Mater. 61, 7488–7499 (2013b). https://doi.org/10.1016/j.actamat.2013.08.061
D. Bhattacharyya, N.A.A. Mara, P. Dickerson, R.G.G. Hoagland, A. Misra, Compressive flow behavior of Al–TiN multilayers at nanometer scale layer thickness. Acta Mater. 59, 3804–3816 (2011). https://doi.org/10.1016/j.actamat.2011.02.036
S.D. Brown, Adherence failure and measurement: Some troubling questions. J. Adhes. Sci. Technol. 8, 687–711 (1994). https://doi.org/10.1163/156856194X00438
S.D. Brown, Adherence failure and measurement: Some troubling questions, in Adhesion Measurement of Films and Coatings, ed. by K. L. Mittal, 1st edn. (VSP, Utrecht, 1995), pp. 15–39
S.J. Bull, Can the scratch adhesion test ever be quantitative? Adhes. Meas. Film. Coatings 2, 107 (2001)
O. Casals, S. Forest, Finite element crystal plasticity analysis of spherical indentation in bulk single crystals and coatings. Comput. Mater. Sci. 45, 774–782 (2009). https://doi.org/10.1016/j.commatsci.2008.09.030
H.Y. Chen, C.J. Tsai, F.H. Lu, The Young’s modulus of chromium nitride films. Surf. Coatings Technol. 184, 69–73 (2004). https://doi.org/10.1016/j.surfcoat.2003.10.064
K. Chen, W.J. Meng, J.A. Eastman, Interface development in cu-based structures transient liquid phase (TLP) bonded with thin Al foil intermediate layers. Metall. Mater. Trans. A. 45, 3892–3906 (2014a). https://doi.org/10.1007/s11661-014-2339-5
K. Chen, Y. Mu, W.J. Meng, A new experimental approach for evaluating the mechanical integrity of interfaces between hard coatings and substrates. MRS Commun. 4, 19–23 (2014b). https://doi.org/10.1557/mrc.2014.3
Y. Chen, S. Shao, X.-Y. Liu, S.K. Yadav, N. Li, N. Mara, J. Wang, Misfit dislocation patterns of mg-Nb interfaces. Acta Mater. 126, 552–563 (2017). https://doi.org/10.1016/j.actamat.2016.12.041
B.D. Cullity, S.R. Stock, Elements of X-Ray Diffraction, 3rd edn. (Prentice-Hall, New York, 2001)
R. Darolia, Thermal barrier coatings technology: critical review, progress update, remaining challenges and prospects. Int. Mater. Rev. 58, 315–348 (2013)
J.A. El-Awady, S. Bulent Biner, N.M. Ghoniem, A self-consistent boundary element, parametric dislocation dynamics formulation of plastic flow in finite volumes. J. Mech. Phys. Solids 56, 2019–2035 (2008). https://doi.org/10.1016/j.jmps.2007.11.002
A.G. Evans, D.R. Clarke, C.G. Levi, The influence of oxides on the performance of advanced gas turbines. J. Eur. Ceram. Soc. 28, 1405–1419 (2008). https://doi.org/10.1016/j.jeurceramsoc.2007.12.023
N.M. Ghoniem, X. Han, Dislocation motion in anisotropic multilayer materials. Philos. Mag. 85, 2809–2830 (2005). https://doi.org/10.1080/14786430500155338
N. Ghoniem, S.-H. Tong, L. Sun, Parametric dislocation dynamics: a thermodynamics-based approach to investigations of mesoscopic plastic deformation. Phys. Rev. B 61, 913–927 (2000). https://doi.org/10.1103/PhysRevB.61.913
N.M. Ghoniem, J. Huang, Z. Wang, Affine covariant-contravariant vector forms for the elastic field of parametric dislocations in isotropic crystals. Philos. Mag. Lett. 82, 55–63 (2002). https://doi.org/10.1080/09500830110103216
S. Groh, E.B. Marin, M.F. Horstemeyer, H.M. Zbib, Multiscale modeling of the plasticity in an aluminum single crystal. Int. J. Plast. 25, 1456–1473 (2009). https://doi.org/10.1016/j.ijplas.2008.11.003
V. Gupta, A.S. Argon, D.M. Parks, J.A. Cornie, Measurement of interface strength by a laser spallation technique. J. Mech. Phys. Solids 40, 141–180 (1992). https://doi.org/10.1016/0022-5096(92)90296-E
V. Gupta, J. Yuan, A. Pronin, Recent developments in the laser spallation technique to measure the interface strength and its relationship to interface toughness with applications to metal/ceramic, ceramic/ceramic and ceramic/polymer interfaces. J. Adhes. Sci. Technol. 8, 713–747 (1994). https://doi.org/10.1163/156856194X00447
V. Gupta, V. Kireev, J. Tian, H. Yoshida, H. Akahoshi, Glass-modified stress waves for adhesion measurement of ultra thin films for device applications. J. Mech. Phys. Solids 51, 1395–1412 (2003). https://doi.org/10.1016/S0022-5096(03)00057-7
X. Han, N.M. Ghoniem, Stress field and interaction forces of dislocations in anisotropic multilayer thin films. Philos. Mag. 85, 1205–1225 (2005). https://doi.org/10.1080/14786430412331331907
C.H. Henager, R.J. Kurtz, R.G. Hoagland, Interactions of dislocations with disconnections in fcc metallic nanolayered materials. Philos. Mag. 84, 2277–2303 (2004). https://doi.org/10.1080/14786430410001678235
J.P. Hirth, J. Lothe, Theory of Dislocations, 2nd edn. (Krieger Publishing Company, Malabar, 1982)
J.P. Hirth, R. Pond, Steps, dislocations and disconnections as interface defects relating to structure and phase transformations. Acta Mater. 44, 4749–4763 (1996). http://www.sciencedirect.com/science/article/pii/S1359645496001322 . Accessed 29 Nov 2012
J.P.P. Hirth, R.C.C. Pond, J. Lothe, Disconnections in tilt walls. Acta Mater. 54, 4237–4245 (2006). https://doi.org/10.1016/j.actamat.2006.05.017
H. Holleck, Material selection for hard coatings. J. Vac. Sci. Technol. A Vac. Surf. Film 4, 2661–2669 (1986). https://doi.org/10.1116/1.573700
K. Holmberg, A. Matthews, Coatings Tribology – Properties, Mechanisms, Techniques and Applications in Surface Engineering, 2nd edn. (Elsevier Science, Amsterdam, 2009)
M.A. Hopcroft, W.D. Nix, T.W. Kenny, What is the Young’s modulus of silicon? J. Microelectromech. Syst. 19, 229–238 (2010). https://doi.org/10.1109/JMEMS.2009.2039697
T. Itoh (ed.), Ion Beam Assisted Film Growth (Elsevier, Amsterdam, 1989)
J.C. Jiang, W.J. Meng, A.G. Evans, C.V. Cooper, Structure and mechanics of W-DLC coated spur gears. Surf. Coatings Technol. 176, 50–56 (2003). https://doi.org/10.1016/S0257-8972(03)00445-6
Y.M. Kim, B.J. Lee, Modified embedded-atom method interatomic potentials for the Ti-C and Ti-N binary systems. Acta Mater. 56, 3481–3489 (2008a). https://doi.org/10.1016/j.actamat.2008.03.027
Y.-M. Kim, B.-J. Lee, Modified embedded-atom method interatomic potentials for the Ti–C and Ti–N binary systems. Acta Mater. 56, 3481–3489 (2008b). https://doi.org/10.1016/j.actamat.2008.03.027
C. Kittel, Introduction to solid state physics. Solid State Phys., 703 (2005). https://doi.org/10.1119/1.1974177
M.N. Kotzalas, G.L. Doll, Tribological advancements for reliable wind turbine performance. Philos. Trans. R. Soc. A Math. Phys. Eng. Sci. 368, 4829–4850 (2010). https://doi.org/10.1098/rsta.2010.0194
C. Kral, W. Lengauer, D. Rafaja, P. Ettmayer, Critical review on the elastic properties of transition metal carbides, nitrides and carbonitrides. J. Alloys Compd. 265, 215–233 (1998). https://doi.org/10.1016/S0925-8388(97)00297-1
P. Kutilek, J. Miksovsky, The procedure of evaluating the practical adhesion strength of new biocompatible nano-and micro-thin films in accordance with international standards. Acta Bioeng. Biomech. 13, 87–94 (2011)
R.A. Lebensohn, C.N. Tomé, A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: Application to zirconium alloys. Acta Metall. Mater. 41, 2611–2624 (1993). https://doi.org/10.1016/0956-7151(93)90130-K
R.A. Lebensohn, C.N. Tomé, A self-consistent viscoplastic model: Prediction of rolling textures of anisotropic polycrystals. Mater. Sci. Eng. A 175, 71–82 (1994). https://doi.org/10.1016/0921-5093(94)91047-2
N. Li, H. Wang, A. Misra, J. Wang, In situ nanoindentation study of plastic co-deformation in Al-TiN nanocomposites. Sci. Rep. 4, 6633 (2014). https://doi.org/10.1038/srep06633
J. Lin, W.D. Sproul, J.J. Moore, Microstructure and properties of nanostructured thick CrN coatings. Mater. Lett. 89, 55–58 (2012). https://doi.org/10.1016/j.matlet.2012.08.060
Z. Lin, X. Peng, T. Fu, Y. Zhao, C. Feng, C. Huang, Z. Wang, Atomic structures and electronic properties of interfaces between aluminum and carbides/nitrides: A first-principles study. Phys. E Low-Dimensional Syst. Nanostruct. 89, 15–20 (2017). https://doi.org/10.1016/j.physe.2017.01.025
K. Lukaszkowicz, A. Kriz, J. Sondor, Structure and adhesion of thin coatings deposited by PVD technology on the X6CrNiMoTi17-12-2 and X40CrMoV5-1 steel substrates. Arch. Mater. Sci. Eng. 51, 40–47 (2011)
H. Lyu, A. Ruimi, H.M. Zbib, A dislocation-based model for deformation and size effect in multi-phase steels. Int. J. Plast. 72, 44–59 (2015). https://doi.org/10.1016/j.ijplas.2015.05.005
H. Lyu, N. Taheri-Nassaj, H.M. Zbib, A multiscale gradient-dependent plasticity model for size effects. Philos. Mag. 96, 1883–1908 (2016). https://doi.org/10.1080/14786435.2016.1180437
H. Lyu, M. Hamid, A. Ruimi, H.M. Zbib, Stress/strain gradient plasticity model for size effects in heterogeneous nano-microstructures. Int. J. Plast. (2017). https://doi.org/10.1016/j.ijplas.2017.05.009
E.B. Marin, On the Formulation of a Crystal Plasticity Model (Livermore, 2006). http://prod.sandia.gov/techlib/access-control.cgi/2006/064170.pdf
P.H. Mayrhofer, G. Tischler, C. Mitterer, Microstructure and mechanical/thermal properties of Cr-N coatings deposited by reactive unbalanced magnetron sputtering. Surf. Coatings Technol. 142–144, 78–84 (2001). https://doi.org/10.1016/S0257-8972(01)01090-8
W.J. Meng, T.J. Curtis, Inductively coupled plasma assisted physical vapor deposition of titanium nitride coatings. J. Electron. Mater. 26, 1297–1302 (1997)
W.J. Meng, G.L. Eesley, Growth and mechanical anisotropy of TiN thin films. Thin Solid Films 271, 108–116 (1995). https://doi.org/10.1016/0040-6090(95)06875-9
W.J. Meng, T.J. Curtis, L.E. Rehn, P.M. Baldo, Temperature dependence of inductively coupled plasma assisted growth of TiN thin films. Surf. Coatings Technol. 120–121, 206–212 (1999). https://doi.org/10.1016/S0257-8972(99)00457-0
W.J. Meng, E.I. Meletis, L.E. Rehn, P.M. Baldo, Inductively coupled plasma assisted deposition and mechanical properties of metal-free and Ti-containing hydrocarbon coatings. J. Appl. Phys. 87, 2840–2848 (2000). https://doi.org/10.1063/1.372266
C. Mercer, A.G. Evans, N. Yao, S. Allameh, C.V. Cooper, Material removal on lubricated steel gears with W-DLC-coated surfaces. Surf. Coatings Technol. 173, 122–129 (2003). https://doi.org/10.1016/S0257-8972(03)00467-5
M.A. Meyers, K.K. Chawla, Mechanical Behavior of Materials (Cambridge University Press, 2007)
R.E. Miller, L. Shilkrot, W.A. Curtin, A coupled atomistics and discrete dislocation plasticity simulation of nanoindentation into single crystal thin films. Acta Mater. 52, 271–284 (2004). https://doi.org/10.1016/j.actamat.2003.09.011
Y. Mu, J.W. Hutchinson, W.J. Meng, Micro-pillar measurements of plasticity in confined cu thin films. Extrem. Mech. Lett. 1, 62–69 (2014). https://doi.org/10.1016/j.eml.2014.12.001
F.R.N. Nabarro, Dislocations in a simple cubic lattice. Proc. Phys. Soc. 59, 256–272 (1947). https://doi.org/10.1088/0959-5309/59/2/309
J.F. Nye, Physical Properties of Crystals: Their Representation by Tensors and Matrices (Oxford University Press, New York, 2000)
W. Oliver, G. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement-sensing indentation systems. J. Mater. Res. 7, 1564–1583 (1992). https://doi.org/10.1557/JMR.1992.1564
R. Peierls, The size of a dislocation. Proc. Phys. Soc. 52, 34–37 (1940). https://doi.org/10.1088/0959-5309/52/1/305
A.J. Perry, J.A. Sue, P.J. Martin, Practical measurement of the residual stress in coatings. Surf. Coatings Technol. 81, 17–28 (1996). https://doi.org/10.1016/0257-8972(95)02531-6
I. Salehinia, S. Shao, J. Wang, H.M.M. Zbib, Plastic deformation of metal/ceramic Nanolayered composites. JOM 66, 2078–2085 (2014). https://doi.org/10.1007/s11837-014-1132-7
I. Salehinia, S. Shao, J. Wang, H.M. Zbib, Interface structure and the inception of plasticity in Nb/NbC nanolayered composites. Acta Mater. 86 (2015). https://doi.org/10.1016/j.actamat.2014.12.026
C. Sant, M. Ben Daia, P. Aubert, S. Labdi, P. Houdy, Interface effect on tribological properties of titanium–titanium nitride nanolaminated structures. Surf. Coatings Technol. 127, 167–173 (2000). https://doi.org/10.1016/S0257-8972(00)00663-0
S. Shao, J. Wang, Relaxation, structure, and properties of semicoherent interfaces. JOM 68, 242–252 (2016). https://doi.org/10.1007/s11837-015-1691-2
S. Shao, J. Wang, A. Misra, R.G. Hoagland, Spiral patterns of dislocations at nodes in (111) semi-coherent FCC interfaces. Sci. Rep. 3 (2013). https://doi.org/10.1038/srep02448
S. Shao, J. Wang, A. Misra, Energy minimization mechanisms of semi-coherent interfaces. J. Appl. Phys. 116, 023508 (2014). https://doi.org/10.1063/1.4889927
S. Shao, J. Wang, I.J. Beyerlein, A. Misra, Glide dislocation nucleation from dislocation nodes at semi-coherent {111} cu–Ni interfaces. Acta Mater. 98, 206–220 (2015). https://doi.org/10.1016/j.actamat.2015.07.044
S. Shao, A. Misra, H. Huang, J. Wang, Micro-scale modeling of interface-dominated mechanical behavior. J. Mater. Sci. (2017). https://doi.org/10.1007/s10853-017-1662-9
S. Shao, F. Akasheh, J. Wang, Y. Liu, Alternative misfit dislocations pattern in semi-coherent FCC {100} interfaces. Acta Mater. 144, 177–186 (2018). https://doi.org/10.1016/j.actamat.2017.10.052
S.A. Skirlo, M.J. Demkowicz, Viscoelasticity of stepped interfaces. Appl. Phys. Lett. 103, 171908 (2013). https://doi.org/10.1063/1.4827103
J.R. Smith, T. Hong, D.J. Srolovitz, Metal-ceramic adhesion and the Harris functional. Phys. Rev. Lett. 72, 4021–4024 (1994). https://doi.org/10.1103/PhysRevLett.72.4021
M.E. Straumanis, L.S. Yu, Lattice parameters, densities, expansion coefficients and perfection of structure of cu and of cu–in α phase. Acta Crystallogr. Sect. A. 25, 676–682 (1969). https://doi.org/10.1107/S0567739469001549
J.A. Sue, A.J. Perry, J. Vetter, Young’s modulus and stress of CrN deposited by cathodic vacuum arc evaporation. Surf. Coatings Technol. 68–69, 126–130 (1994). https://doi.org/10.1016/0257-8972(94)90149-X
T. Sun, X. Wu, R. Wang, W. Li, Q. Liu, First-principles study on the adhesive properties of Al/TiC interfaces: Revisited. Comput. Mater. Sci. 126, 108–120 (2017). https://doi.org/10.1016/j.commatsci.2016.09.024
K.H. Thulasi Raman, M.S.R.N. Kiran, U. Ramamurty, G. Mohan Rao, Structural and mechanical properties of room temperature sputter deposited CrN coatings. Mater. Res. Bull. 47, 4463–4466 (2012). https://doi.org/10.1016/j.materresbull.2012.09.051
L. Toth, Transition Metal Carbides and Nitrides (Elsevier Science, 1971)
M.D. Uchic, D.M. Dimiduk, J.N. Florando, W.D. Nix, Sample dimensions influence strength and crystal plasticity. Science 305, 986–989 (2004). https://doi.org/10.1126/science.1098993
M.D. Uchic, P.A. Shade, D.M. Dimiduk, Plasticity of micrometer-scale single crystals in compression. Annu. Rev. Mater. Res. 39, 361–386 (2009). https://doi.org/10.1146/annurev-matsci-082908-145422
L.J. Vandeperre, F. Giuliani, S.J. Lloyd, W.J. Clegg, The hardness of silicon and germanium. Acta Mater. 55, 6307–6315 (2007). https://doi.org/10.1016/j.actamat.2007.07.036
C.A. Volkert, A.M. Minor, Focused ion beam microscopy and micromachining. MRS Bull. 32, 389–399 (2007). https://doi.org/10.1557/mrs2007.62
J. L. Vossen, W. Kern (eds.), Thin Film Processes II (Academic Press, Boston, 1991)
J. Wang, A. Misra, An overview of interface-dominated deformation mechanisms in metallic multilayers. Curr. Opin. Solid State Mater. Sci. 15, 20–28 (2011). https://doi.org/10.1016/j.cossms.2010.09.002
J. Wang, A. Misra, Strain hardening in nanolayered thin films. Curr. Opin. Solid State Mater. Sci. 18, 19–28 (2014). https://doi.org/10.1016/j.cossms.2013.10.003
J. Wang, R.G. Hoagland, J.P. Hirth, A. Misra, Atomistic simulations of the shear strength and sliding mechanisms of copper–niobium interfaces. Acta Mater. 56, 3109–3119 (2008). https://doi.org/10.1016/j.actamat.2008.03.003
H. Wang, P.D. Wu, C.N. Tomé, Y. Huang, A finite strain elastic-viscoplastic self-consistent model for polycrystalline materials. J. Mech. Phys. Solids 58, 594–612 (2010). https://doi.org/10.1016/j.jmps.2010.01.004
J. Wang, C. Zhou, I.J.I.J. Beyerlein, S. Shao, Modeling interface-dominated mechanical behavior of nanolayered crystalline composites. JOM 66, 102–113 (2014). https://doi.org/10.1007/s11837-013-0808-8
J. Wang, Q. Zhou, S. Shao, A. Misra, Strength and plasticity of nanolaminated materials. Mater. Res. Lett. 5 (2017). https://doi.org/10.1080/21663831.2016.1225321
S.K.K. Yadav, S. Shao, J. Wang, X.-Y.X.-Y. Liu, Structural modifications due to interface chemistry at metal-nitride interfaces. Sci. Rep. 5, 17380 (2015). https://doi.org/10.1038/srep17380
W. Yang, G. Ayoub, I. Salehinia, B. Mansoor, H. Zbib, Deformation mechanisms in Ti/TiN multilayer under compressive loading. Acta Mater. 122, 99–108 (2017). https://doi.org/10.1016/j.actamat.2016.09.039
H.M. Zbib, T. Diaz de la Rubia, A multiscale model of plasticity. Int. J. Plast. 18, 1133–1163 (2002). https://doi.org/10.1016/S0749-6419(01)00044-4
H.M. Zbib, M. Rhee, J.P. Hirth, On plastic deformation and the dynamics of 3D dislocations. Int. J. Mech. Sci. 40, 113–127 (1998). https://doi.org/10.1016/S0020-7403(97)00043-X
J.M. Zhang, Y. Zhang, K.W. Xu, V. Ji, Representation surfaces of Young’s modulus and Poisson’s ratio for BCC transition metals. Phys. B Condens. Matter 390, 106–111 (2007). https://doi.org/10.1016/j.physb.2006.08.008
Z.G. Zhang, O. Rapaud, N. Bonasso, D. Mercs, C. Dong, C. Coddet, Control of microstructures and properties of dc magnetron sputtering deposited chromium nitride films. Vacuum 82, 501–509 (2008). https://doi.org/10.1016/j.vacuum.2007.08.009
R.F. Zhang, T.C. Germann, J. Wang, X.-Y. Liu, I.J. Beyerlein, Role of interface structure on the plastic response of cu/Nb nanolaminates under shock compression: Non-equilibrium molecular dynamics simulations. Scr. Mater. 68, 114–117 (2013). https://doi.org/10.1016/j.scriptamat.2012.09.022
R.F. Zhang, I.J. Beyerlein, S.J. Zheng, S.H. Zhang, A. Stukowski, T.C. Germann, Manipulating dislocation nucleation and shear resistance of bimetal interfaces by atomic steps. Acta Mater. 113, 194–205 (2016). https://doi.org/10.1016/j.actamat.2016.05.015
X. Zhang, B. Zhang, Y. Mu, S. Shao, C.D.C.D. Wick, B.R. Ramachandran, W.J. Meng, Mechanical failure of metal/ceramic interfacial regions under shear loading. Acta Mater. 138, 224–236 (2017). https://doi.org/10.1016/j.actamat.2017.07.053
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this entry
Cite this entry
Meng, W.J., Shao, S. (2019). Experimentation and Modeling of Mechanical Integrity and Instability at Metal/Ceramic Interfaces. In: Voyiadjis, G. (eds) Handbook of Nonlocal Continuum Mechanics for Materials and Structures. Springer, Cham. https://doi.org/10.1007/978-3-319-58729-5_50
Download citation
DOI: https://doi.org/10.1007/978-3-319-58729-5_50
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-58727-1
Online ISBN: 978-3-319-58729-5
eBook Packages: EngineeringReference Module Computer Science and Engineering