Abstract
The polymerase chain reaction (PCR) has rapidly become the most valuable tool in the clinical diagnostic arsenal for determining specific diseases or detecting infectious agents. Primers, short pieces of DNA complementary to the DNA sequence of interest, are mixed with nucleotides, a small amount of template DNA from the sample of interest, and Taq DNA polymerase enzyme in the appropriate buffer. Using temperature cycling, a short piece of DNA (50-1000 bp in length), defined by the primers chosen, is rapidly amplified from the few initial template molecules added to the mixture. The amplification product is then analyzed using an electrophoretic separation. The entire process, shown in Fig. 1, includes the “sample preparation” which typically involves isolating the appropriate cells, from which the DNA is extracted prior to PCR amplification. To utilize this sequence most efficiently there should be a continuous flow from sample collection to diagnosis. This would eliminate both delays due to the transfer of material between each step and the need for intervention before the next step could begin. In the ideal world, this diagnosis would be immediate—the real goal is to decrease the time to as short as possible. Towards this end, the integration of the steps detailed in Fig. 1 into a single platform is of obvious and critical importance (see Note 1).
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Woolley, A. T. and Mathies, R. A. (1994) Ultra-high-speed DNA fragment separations using microfabricated capillary array electrophoresis chips. Proc. Natl. Acad. Sci. USA 91, 11,348–11,352.
Freemantle, M. (1999) Downsizing chemistry. C & E News 77, 27–36.
Wilding, P., Shoffner, M. A., and Kricka, L. J. (1994) PCR in a silicon microstructure. Clin. Chem. 40, 1815–1818.
Woolley, A. T., Hadley, D., Landre, P., deMello, A. J., Mathies, R. A., and Northrup, M. A. (1996) Functional integration of PCR amplification and capillary electrophoresis in a microfabricated DNA analysis device. Anal. Chem. 68, 4081–4086.
Kopp, M. T., deMello, A. J., and Manz, A. (1998) Chemical amplification: continuousflow PCR on a chip. Science 280, 1046–1048.
Wittwer, C. T., Reed, G. B., and Ririe, K. M. (1994) Rapid cycle DNA amplification, in The Polymerase Chain Reaction (Mullis, K. B., Ferré, F., and Gibbs R. A., eds.), Birkhauser, Boston, pp. 175–181.
Friedman, N. A. and Meldrum, D. R. (1998) Capillary tube resistive thermal cycling. Anal. Chem. 70, 2997–3002.
Oda, R. P., Strausbauch, M. A., Huhmer, A. F. R., Borson, N., Jurrens, S. R., Craighead, J., et al. (1998) Infrared-mediated thermocycling for ultrafast polymerase chain reaction amplification of DNA. Anal. Chem. 70, 4361–4368.
Shoffner, M. A., Cheng, J., Hvichia, G. E., Kricka, J. J., and Wilding, P. (1996) Chip PCR. I. Surface passivation of microfabricated silicon-glass chips for PCR. Nucleic Acids Res. 24, 375–379.
Xie, W., Yang, R., Xu, J., Zhang, L., Xing, W., and Cheng, J. (2001) Microchip-based capillary electrophoresis systems, in Capillary Electrophoresis of Nucleic Acids, Vol. 1 (Mitchelson, K. R., and Cheng, J., eds.), Humana Press, Totowa, NJ, pp. 67–83.
Ibrahim, M. S., Lofts, R. S., Jahrling, P. B., Henchal, E. A., Weedn, V.W., Northrup, M. A., and Belgrader, P. (1998) Real-time microchip PCR for detecting single-base differences in viral and human DNA. Anal. Chem. 70, 2013–2017.
Kalinina, O., Lebedeva, I., Brown, J., and Silver, J. (1997) Nanoliter scale PCR with TaqMan detection. Nucleic Acids Res. 25, 1999–2004.
Oda, R. P, Strausbauch, M. A., Hühmer, A. F. R., Borson, N., Jurrens, S. R., Craighead, J., et al. (1998) Infrared-mediated thermocycling for ultrafast polymerase chain reaction amplification of DNA. Anal. Chem. 70, 4361–4368.
Waters, L. C., Jacobson, S. C., Kroutchinina, N., Khandurina, J., Foote, R. S., and Ramsey, J. M. (1998) Multiple sample PCR amplification and electrophoretic analysis on a microchip. Anal. Chem. 70, 5172–5176.
Harrison, D. J., Fluri, K., Chiem, N., Tang, T., and Fan, Z. (1996) Micromachining chemical and biochemical analysis and reaction systems on glass substrates. Sensors and Actuators B. 33, 105–109.
Tarigan, H. J., Neill, P., Kenmore, C. K., and Bornhop, D. J. (1996) Capillary-scale refractive index detection by interferometric backscatter. Anal. Chem. 68, 1762–1770.
Khandurina, J., Jacobson, S. C., Waters, L. C., Foote, R. S., Ramsey, J. M. (1999) Microfabricated porous membrane structure for sample concentration and electrophoretic analysis. Anal. Chem. 71, 1815–1819.
Schmalzing, D., Adourian, A., Koutny, L., Ziaugra, L., Matsudaira, P., and Ehrlich, D. (1998) DNA sequencing on microfabricated electrophoretic devices. Anal Chem. 70, 2303–2310.
Hofgaertner, W., Hühmer, A. F. R., Landers J. P., and Kant, J. (1999) Rapid diagnosis of HSV-induced encephalitis: Electrophoresis of PCR products on microchips. Clin. Chem. 45, 2132–2140.
Munro, N. J., Snow, K., Kant, J., and Landers, J. P. (1999) Molecular diagnostics on microfabricated electrophoretic devices: Translating slab gel-based T-and B-cell lymphomoproliferative disorder assays from the capillary to the microchip. Clin. Chem. 45, 1906–1917.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2001 Humana Press Inc.
About this protocol
Cite this protocol
Ferrance, J.P., Giordano, B., Landers, J.P. (2001). Toward Effective PCR-Based Amplification of DNA on Microfabricated Chips. In: Mitchelson, K.R., Cheng, J. (eds) Capillary Electrophoresis of Nucleic Acids. Methods in Molecular Biology™, vol 163. Humana Press. https://doi.org/10.1385/1-59259-116-7:191
Download citation
DOI: https://doi.org/10.1385/1-59259-116-7:191
Publisher Name: Humana Press
Print ISBN: 978-0-89603-765-6
Online ISBN: 978-1-59259-116-9
eBook Packages: Springer Protocols