Cell-Based Microarrays pp 161-170 | Cite as
Rapid Prototyping of Thermoplastic Microfluidic Devices
Abstract
Microfluidic systems can be applied to develop unique tools for cell culture, low-cost diagnostics, and precision experimentation by leveraging microscale fluid flow. As the field has expanded and matured, there is a need for rapid prototyping that is both accessible to most research groups and can readily translate toward scalable commercial manufacturing. Here, we describe a protocol that incorporates rapid computer numerical control (CNC) milling of positive molds, casting of a negative high-durometer silicone mold, and hot embossing to produce microfluidic devices composed of virtually any thermoplastic material. The method bypasses the need for high-precision machining of the bonding surfaces by using a cast acrylic stock and only milling channels, thus expanding this protocol to any CNC platform This technique represents a versatile, high-fidelity prototyping method that enables fast turnaround of prototype devices in a standard laboratory setting, while offering scalability for commercial manufacturing.
Key words
Microfabrication Hot embossing Rapid prototyping Thermoplastics Mold fabrication MicrofluidicsNotes
Acknowledgment
This research was sponsored by the Wyss Institute for Biologically Inspired Engineering at Harvard University and the Defense Advanced Research Projects Agency under Cooperative Agreement W911NF-12-2-0036, FDA grant HHSF223201310079C, and NIH grants R01 EB020004-01 and 1UG3HL141797-01. The views and conclusions contained in this document are those of the authors and should not be interpreted as representing the official policies, either expressed or implied, of the Defense Advanced Research Projects Agency, Food and Drug Administration, or the U.S. Government.
Competing financial interests
D.E.I. is a founder and holds equity in Emulate Inc., and he chairs its scientific advisory board.
References
- 1.Bhatia SN, Ingber DE (2014) Microfluidic organs-on-chips. Nat Biotechnol 32:760–772CrossRefGoogle Scholar
- 2.Duncombe TA, Tentori AM, Herr AE (2015) Microfluidics: reframing biological enquiry. Nat Rev Mol Cell Biol 16:554–567CrossRefGoogle Scholar
- 3.Novak R, Zeng Y, Shuga J, Venugopalan G, Fletcher DA, Smith MT, Mathies RA (2011) Single-cell multiplex gene detection and sequencing with microfluidically generated agarose emulsions. Angew Chem Int Ed 50:390–395CrossRefGoogle Scholar
- 4.Rothbauer M, Wartmann D, Charwat V, Ertl P (2015) Recent advances and future applications of microfluidic live-cell microarrays. Biotechnol Adv 33:948–961CrossRefGoogle Scholar
- 5.Duffy DC, McDonald JC, Schueller OJA, Whitesides GM (1998) Rapid prototyping of microfluidic systems in poly(dimethylsiloxane). Anal Chem 70:4974–4984CrossRefGoogle Scholar
- 6.Guckenberger DJ, de Groot TE, Wan AMD, Beebe DJ, Young EWK (2015) Micromilling: a method for ultra-rapid prototyping of plastic microfluidic devices. Lab Chip 15:2364–2378CrossRefGoogle Scholar
- 7.Shiu PP, Knopf GK, Ostojic M, Nikumb S (2008) Rapid fabrication of tooling for microfluidic devices via laser micromachining and hot embossing. J Micromech Microeng 18:25012CrossRefGoogle Scholar
- 8.Xu J, Locascio L, Gaitan M, Lee CS (2000) Room-temperature imprinting method for plastic microchannel fabrication. Anal Chem 72:1930–1933CrossRefGoogle Scholar
- 9.Leech PW (2009) Hot embossing of cyclic olefin copolymers. J Micromech Microeng 19:55008CrossRefGoogle Scholar
- 10.Attia UM, Marson S, Alcock JR (2009) Micro-injection moulding of polymer microfluidic devices. Microfluid Nanofluid 7:1CrossRefGoogle Scholar
- 11.Ng SH, Wang ZF (2009) Hot roller embossing for microfluidics: process and challenges. Microsyst Technol 15:1149–1156CrossRefGoogle Scholar
- 12.Wu W, Manz A (2015) Rapid manufacture of modifiable 2.5-dimensional (2.5D) microstructures for capillary force-driven fluidic velocity control. RSC Adv 5:70737–70742CrossRefGoogle Scholar
- 13.Carlborg CF, Haraldsson T, Öberg K, Malkoch M, van der Wijngaart W (2011) Beyond PDMS: off-stoichiometry thiolene (OSTE) based soft lithography for rapid prototyping of microfluidic devices. Lab Chip 11:3136–3147CrossRefGoogle Scholar
- 14.Becker H, Gärtner C (2008) Polymer microfabrication technologies for microfluidic systems. Anal Bioanal Chem 390:89–111CrossRefGoogle Scholar
- 15.Sollier E, Murray C, Maoddi P, Carlo DD (2011) Rapid prototyping polymers for microfluidic devices and high pressure injections. Lab Chip 11:3752–3765CrossRefGoogle Scholar
- 16.Lin T-Y, Do T, Kwon P, Lillehoj PB (2017) 3D printed metal molds for hot embossing plastic microfluidic devices. Lab Chip 17:241–247CrossRefGoogle Scholar
- 17.Novak R, Ranu N, Mathies RA (2013) Rapid fabrication of nickel molds for prototyping embossed plastic microfluidic devices. Lab Chip 13:1468–1471CrossRefGoogle Scholar
- 18.Paredes J, Fink KD, Novak R, Liepmann D (2015) Self-anchoring nickel microelectrodes for rapid fabrication of functional thermoplastic microfluidic prototypes. Sens Actuators B Chem 216:263–270CrossRefGoogle Scholar
- 19.Mair DA, Geiger E, Pisano AP, Fréchet JMJ, Svec F (2006) Injection molded microfluidic chips featuring integrated interconnects. Lab Chip 6:1346–1354CrossRefGoogle Scholar
- 20.Ogilvie IRG, Sieben VJ, Floquet CFA, Zmijan R, Mowlem MC, Morgan H (2010) Reduction of surface roughness for optical quality microfluidic devices in PMMA and COC. J Micromech Microeng 20:65016CrossRefGoogle Scholar
- 21.Tsao C-W, DeVoe DL (2009) Bonding of thermoplastic polymer microfluidics. Microfluid Nanofluid 6:1–16CrossRefGoogle Scholar
- 22.Faustino V, Catarino SO, Lima R, Minas G (2016) Biomedical microfluidic devices by using low-cost fabrication techniques: a review. J Biomech 49:2280–2292CrossRefGoogle Scholar
- 23.Miserere S, Mottet G, Taniga V, Descroix S, Viovy J-L, Malaquin L (2012) Fabrication of thermoplastics chips through lamination based techniques. Lab Chip 12:1849–1856CrossRefGoogle Scholar