1. The status and perspectives of nanostructured materials and fabrication processes for wearable piezoresistive sensors | William Chiappim et al. |
2. Optimization of MEMS capacitive accelerometer | Mourad Benmessaoud, Mekkakia Maaza Nasreddine |
3. Carbon nanotubes: a review on properties, synthesis methods and applications in micro and nanotechnology | Rizwan Shoukat, Muhammad Imran Khan |
4. Assessing the electricity energy efficiency of university campus exterior lighting system and proposing energy-saving strategies for carbon emission reduction | Alper Kerem |
5. Design, development and performance analysis of FSPV system for powering sustainable energy based mini micro-grid | Sagnik Bhattacharya, Anik Goswami, Pradip Kumar Sadhu |
6. Material selection for optimum design of MEMS pressure sensors | Zahid Mehmood, Ibraheem Haneef, Florin Udrea |
7. Design principles and considerations for the ‘ideal’ silicon piezoresistive pressure sensor: a focused review | S. Santosh Kumar, B. D. Pant |
8. Compact elliptic ring 2 × 2 and 4 × 4 MIMO-UWB antenna at 60 GHz for 5G mobile communications applications | Sarah A. Alassawi, Wael A. E. Ali, Nour Ismail, Mohamed R. M. Rizk |
9. Research development of silicon MEMS gyroscopes: a review | Guo Zhanshe, Cheng Fucheng, Li Boyu, Cao Le, Lu Chao, Song Ke |
10. Temperature sensor integrated curl resonator chipless RFID tag for high capacity data identification applications | Hend A. Malhat, Esraa A. El-Refaay, Saber H. Zainud-Deen |
11. Fabrication process for FEP piezoelectrets based on photolithographically structured thermoforming templates | D. Flachs, F. Emmerich, C. Thielemann |
12. Microgripper design and evaluation for automated µ-wire assembly: a survey | H. Llewellyn-Evans, C. A. Griffiths, A. Fahmy |
13. A scientist’s guide to research: strategy, execution and publications | Bharat Bhushan |
14. A novel approach to construct self-assembled 3D MEMS arrays | Sapida Akhundzada et al. |
15. A review on piezoelectric energy harvesting | E. L. Pradeesh, S. Udhayakumar, M. G. Vasundhara, G. K. Kalavathi |
16. Injection moulding of micropillar arrays: a comparison of poly(methyl methacrylate) and cyclic olefin copolymer | Bin Guan, Jing-Hong Pai, Mark Cherrill, Billy Michalatos, Craig Priest |
17. Modified PDMS packaging of sensory e-textile circuit microsystems for improved robustness with washing | Olivia Ojuroye, Russel Torah, Steve Beeby |
18. An overview of additive manufacturing (3D printing) for microfabrication | Bharat Bhushan, Matt Caspers |
19. Realization of high-efficiency and high-output characteristics of magnetic power generators using single-phase angle transformation and three-phase six-wire winding | Ching-Chuan Lin, Chang-Ren Chen |
20. Lab-on-a-chip: a component view | Y. C. Lim, A. Z. Kouzani, W. Duan |
21. Piezoelectric elements subjected to low frequency excitation. Empirical determination of stress and frequency influence on piezoelectric parameters | Ernest Bernat-Maso, Luis E. Mercedes |
22. Design and modeling of a multiband electrically coupled loop antenna for biomedical applications | Abdullah Muhammad Mahfouz, Ali Ahmed Younis Ibraheem, Osama M. Haraz |
23. Energy harvester based on low cost piezoelectric membrane for road traffic application | Ernest Bernat-Maso, Borja Martínez, Luis Mercedes, Virginia Mendizábal |
24. An analytical method to design annular microfilaments with uniform temperature | Ferenc Bíró, András Deák, István Bársony, Nikolay Samotev, Csaba Dücső |
25. Piezoelectric micropumps: state of the art review | Hamid Asadi Dereshgi, Huseyin Dal, Mustafa Zahid Yildiz |