1. A review of surface roughness measurements based on laser speckle method

   • Mei-qi Shao
   • Dong Xu
   • Quan Yang

   Review 03 April 2023 Pages: 1897 - 1915

   

2. Chemical patterning enhanced by increasing quenching temperature in a medium-Mn steel

   • Chao Zhang
   • Zhi-ping Xiong
   • Xing-wang Cheng

   Short Communication 14 February 2023 Pages: 1916 - 1920

   

3. Effect of Al₂O₃/SiO₂ ratio on morphology of complex calcium ferrite

   • Dai-wei Yang
   • Wei Wang
   • Peng-fei Chen

   Original Paper 11 January 2023 Pages: 1921 - 1928

   

4. An experimental study on RH vacuum chamber with a weir

   • Qing He
   • Tong-lu Yao
   • Long-fei Li

   Original Paper 29 June 2023 Pages: 1929 - 1938

   

5. Characteristics of SEN clogging and adhesive behavior of oxide inclusion during continuous casting of Ti-stabilized ultra-pure ferritic stainless steels

   • Xue-feng Bai
   • Yan-hui Sun
   • Hui-bin Wu

   Original Paper 03 November 2022 Pages: 1939 - 1951

   

6. Effect of Ca and Ti contents on characteristics of inclusions in Fe–Si–Cr–Mn–Al–Ti–Ca–O melts

   • Ren-sheng Li
   • Meng-chuan Li
   • Wan-lin Wang

   Original Paper 09 January 2023 Pages: 1952 - 1962

   

7. In-situ observation and analysis of solidified structure evolution of S50C steel in soaking furnace

   • Kai Liu
   • Shu-sen Cheng
   • Olena Volkova

   Original Paper 08 April 2023 Pages: 1963 - 1973

   

8. Drawing–upsetting–extrusion–clinching of high-strength steel and aluminum alloy

   • Ling-feng Luo
   • Shang-yu Huang
   • Bing Ou

   Original Paper 02 March 2023 Pages: 1974 - 1986

   

9. Evolution of inclusion and microstructure in Ti–Zr deoxidized steel during hot compression

   • Yong-kun Yang
   • Jia-yu Zhu
   • Dong-ping Zhan

   Original Paper 09 January 2023 Pages: 1987 - 1999

   

10. Formation and evolution of primary carbides in high-carbon martensitic stainless steel

    • Chang Sun
    • Jing Li
    • Shou-hui Li

    Original Paper 08 November 2022 Pages: 2000 - 2009

    

11. Deformation characterization method of typical double-walled turbine blade structure during casting process

    • Yi-wei Dong
    • Peng-fei Shao
    • Zhi-yong Tan

    Original Paper 10 February 2023 Pages: 2010 - 2020

    

12. Enhanced slag resistance and mechanical properties of magnesia castables with strontium carbonate addition

    • Hao Liu
    • Yu-xuan Zhu
    • Xi-tang Wang

    Original Paper 25 January 2023 Pages: 2021 - 2030

    

13. The influence of adding niobium and vanadium on hydrogen diffusion in 22MnB5 hot stamping steel

    • Peng-wei Zhou
    • Zhi-yi Yan
    • Wei Li

    Original Paper 24 March 2023 Pages: 2031 - 2042

    

14. Detrimental effect of arsenic on hot ductility of copper-bearing steel

    • Wen-bin Xin
    • Yu-yu Liang
    • Yin-ju Jiang

    Original Paper 17 May 2023 Pages: 2043 - 2054

    

15. Microstructure evolution and performance improvement of powder metallurgy stainless steel with P addition

    • Qian Qin
    • Dao-qing Zhang
    • Zhi-meng Guo

    Original Paper 15 May 2023 Pages: 2055 - 2066

    

16. pH-dependent corrosion initiation behavior induced by inclusions of low alloy steel in simulated marine environments

    • Heng Ma
    • Zhong-xue Wang
    • Zhong-yu Cui

    Original Paper 07 December 2022 Pages: 2067 - 2079

    

17. Effect of trace boron on corrosion resistance of rust layer of high-strength low-alloy steel in 3.5 wt.% NaCl solution

    • Yan-hui Hou
    • Ze-kun Xu
    • Guang-qiang Li

    Original Paper 05 January 2023 Pages: 2080 - 2090

    

18. Effect of microstructure variation on corrosion properties of as-cast 0Cr23Ni13 stainless steel at high strain rate of hot compression

    • Jun-chen Li
    • Meng-yuan Ye
    • Xing-run Chen

    Original Paper 22 March 2023 Pages: 2091 - 2100

    

19. Effect of rare earth content on microstructure and corrosion resistance of hot-dip Zn–5Al alloy coated steel wire for bridge cables

    • Xiao-xiong Zhu
    • Yi-fu Shen
    • Guo-hao Xiao

    Original Paper 14 March 2023 Pages: 2101 - 2110