Volume 9, issue 1, December 2023
35 articles in this issue
-
-
Clinical situations for which 3D Printing is considered an appropriate representation or extension of data contained in a medical imaging examination: vascular conditions
Authors (first, second and last of 14)
- Joonhyuk Lee
- Seetharam C. Chadalavada
- David H. Ballard
- Content type: Guideline
- Open Access
- Published: 30 November 2023
- Article: 34
-
Clinical situations for which 3D printing is considered an appropriate representation or extension of data contained in a medical imaging examination: neurosurgical and otolaryngologic conditions
Authors (first, second and last of 7)
- Arafat Ali
- Jonathan M. Morris
- David H Ballard
- Content type: Guideline
- Open Access
- Published: 27 November 2023
- Article: 33
-
Characterization of mechanical stiffness using additive manufacturing and finite element analysis: potential tool for bone health assessment
Authors (first, second and last of 4)
- Sriharsha Marupudi
- Qian Cao
- Nicholas Petrick
- Content type: Research
- Open Access
- Published: 18 November 2023
- Article: 32
-
Correction: Navigating the intersection of 3D printing, software regulation and quality control for point-of-care manufacturing of personalized anatomical models
Authors
- Naomi C. Paxton
- Content type: Correction
- Open Access
- Published: 17 November 2023
- Article: 31
-
Assessment of Staphylococcus Aureus growth on biocompatible 3D printed materials
Authors (first, second and last of 6)
- Nicole Senderovich
- Sharan Shah
- Nicole Wake
- Content type: Research
- Open Access
- Published: 02 November 2023
- Article: 30
-
Development of a 3D-printed, patient-specific stereotactic system for bihemispheric deep brain stimulation
Authors (first, second and last of 7)
- Patrick Knorr
- Dirk Winkler
- Ronny Grunert
- Content type: Case Report
- Open Access
- Published: 13 October 2023
- Article: 29
-
3D-printing of the elbow in complex posttraumatic elbow-stiffness for preoperative planning, surgery-simulation and postoperative control
Authors (first, second and last of 8)
- Ronny Grunert
- Dirk Winkler
- Maria Elze
- Content type: Case Report
- Open Access
- Published: 06 October 2023
- Article: 28
-
Medical 3D printing with polyjet technology: effect of material type and printing orientation on printability, surface structure and cytotoxicity
Authors (first, second and last of 13)
- Karl H. Schneider
- Gunpreet Oberoi
- Francesco Moscato
- Content type: Research
- Open Access
- Published: 28 September 2023
- Article: 27
-
Hybrid modeling techniques for 3D printed deep inferior epigastric perforator flap models
Authors (first, second and last of 6)
- Nicholas M. Jacobson
- Erik Carerra
- Christodoulous Kaoutzanis
- Content type: Research
- Open Access
- Published: 12 September 2023
- Article: 26
-
Technical improvements in preparing 3D printed anatomical models for comminuted fracture preoperative planning
Authors (first, second and last of 6)
- Naomi C. Paxton
- Brandon G. Wilkinson
- Paul D. Dalton
- Content type: Research
- Open Access
- Published: 11 September 2023
- Article: 25
-
Use of patient-specific guides and 3D model in scapula osteotomy for symptomatic malunion
Authors (first, second and last of 6)
- Stefano Cattaneo
- Marco Domenicucci
- Giuseppe Milano
- Content type: Case Report
- Open Access
- Published: 06 September 2023
- Article: 24
-
Correction to: Design, printing optimization, and material testing of a 3D-printed nasal osteotomy task trainer
Authors (first, second and last of 9)
- Lauren Schlegel
- Eric Malani
- Robert Pugliese
- Content type: Correction
- Open Access
- Published: 21 August 2023
- Article: 23
-
Development of an individual helmet orthosis for infants based on a 3D scan
Authors (first, second and last of 6)
- Fabian Kropla
- Martin Hoffmann
- Ronny Grunert
- Content type: Case Study
- Open Access
- Published: 16 August 2023
- Article: 22
-
Generative AI for medical 3D printing: a comparison of ChatGPT outputs to reference standard education
Authors (first, second and last of 10)
- Aakanksha Sriwastwa
- Prashanth Ravi
- Rajul Gupta
- Content type: Editorial
- Open Access
- Published: 01 August 2023
- Article: 21
-
Design, printing optimization, and material testing of a 3D-printed nasal osteotomy task trainer
Authors (first, second and last of 9)
- Lauren Schlegel
- Eric Malani
- Robert Pugliese
- Content type: Methodology
- Open Access
- Published: 13 July 2023
- Article: 20
-
Development of 3D printed patient-specific skull implants based on 3d surface scans
Authors (first, second and last of 6)
- Fabian Kropla
- Dirk Winkler
- Ronny Grunert
- Content type: Case Report
- Open Access
- Published: 30 June 2023
- Article: 19
-
Elbow hemiarthroplasty with a 3D-printed prosthesis for distal humeral bone defects after tumor excision: a case report
Authors (first, second and last of 4)
- Yingkang Zhu
- Shuo Gong
- Lei Zhou
- Content type: Case Report
- Open Access
- Published: 14 June 2023
- Article: 18
-
Design and Development of a Novel 3-D Printed External Fixation Device for Fracture Stabilization
Authors
- Nathan Wm. Skelley
- Content type: Research
- Open Access
- Published: 14 June 2023
- Article: 17
-
Deformable titanium for acetabular revision surgery: a proof of concept
Authors (first, second and last of 7)
- J. Magré
- K. Willemsen
- H. Weinans
- Content type: Research
- Open Access
- Published: 09 June 2023
- Article: 16
-
3D Printed Orthopaedic External Fixation Devices: A Systematic Review
Authors (first, second and last of 4)
- Hunter A. O’Connor
- Luke W. Adams
- Nathan Wm. Skelley
- Content type: Research
- Open Access
- Published: 07 June 2023
- Article: 15
-
Perspectives on medical 3D printing at the point-of-care from the new European 3D Printing Special Interest Group
Authors (first, second and last of 8)
- Giovanni Biglino
- Carina Hopfner
- Arnau Valls Esteve
- Content type: Research
- Open Access
- Published: 05 May 2023
- Article: 14
-
3D printing exposure and perception in radiology residency: survey results of radiology chief residents
Authors (first, second and last of 8)
- David Chen
- Aravinda Ganapathy
- David H. Ballard
- Content type: Research
- Open Access
- Published: 27 April 2023
- Article: 13
-
3D-printing a cost-effective model for mastoidectomy training
Authors (first, second and last of 9)
- Andreas Frithioff
- Kenneth Weiss
- Steven Arild Wuyts Andersen
- Content type: Research
- Open Access
- Published: 17 April 2023
- Article: 12
-
Guiding prosthetic femoral version using 3D-printed patient-specific instrumentation (PSI): a pilot study
Authors (first, second and last of 4)
- Maria Moralidou
- Johann Henckel
- Alister Hart
- Content type: Research
- Open Access
- Published: 14 April 2023
- Article: 11
-
Utilizing 3D printing to assist pre-procedure planning of transjugular intrahepatic portosystemic shunt (TIPS) procedures: a pilot study
Authors (first, second and last of 8)
- Lucas Richards
- Shiv Dalla
- Aaron Rohr
- Content type: Research
- Open Access
- Published: 13 April 2023
- Article: 10
-
Navigating the intersection of 3D printing, software regulation and quality control for point-of-care manufacturing of personalized anatomical models
Authors
- Naomi C. Paxton
- Content type: Research
- Open Access
- Published: 07 April 2023
- Article: 9
-
Radiological Society of North America (RSNA) 3D Printing Special Interest Group (SIG) clinical situations for which 3D printing is considered an appropriate representation or extension of data contained in a medical imaging examination: breast conditions
Authors (first, second and last of 15)
- Elsa M. Arribas
- Tatiana Kelil
- RSNA Special Interest 3D Printing Breast Conditions Voting Group
- Content type: Research
- Open Access
- Published: 23 March 2023
- Article: 8
-
Local design and manufacturing of patient-specific implant using Anatomage Medical Design Studio software: proof of concept - Botswana’s 1st case report
Authors (first, second and last of 8)
- Shathani Nkhwa
- Thapelo Montshiwa
- Maikutlo Kebaetse
- Content type: Research
- Open Access
- Published: 23 March 2023
- Article: 7
-
Individualized medicine using 3D printing technology in gynecology: a scoping review
Authors (first, second and last of 5)
- Carly M. Cooke
- Teresa E. Flaxman
- Sukhbir S. Singh
- Content type: Research
- Open Access
- Published: 17 March 2023
- Article: 6
-
Customizable document control solution for 3D printing at the point-of-care
Authors
- Maxwell Lohss
- Elliott Hammersley
- Anish Ghodadra
- Content type: Research
- Open Access
- Published: 17 March 2023
- Article: 5
-
Use of 3-dimensional printing at the point-of-care to manage a complex wound in hemifacial necrotizing fasciitis: a case report
Authors (first, second and last of 9)
- Sarah C. Nyirjesy
- Ryan T. Judd
- Kyle K. VanKoevering
- Content type: Case Report
- Open Access
- Published: 23 February 2023
- Article: 4
-
Development and evaluation of a facile mesh-to-surface tool for customised wheelchair cushions
Authors (first, second and last of 4)
- Susan Nace
- John Tiernan
- Donal Holland
- Content type: Research
- Open Access
- Published: 13 February 2023
- Article: 3
-
Comparative effectiveness of virtual reality (VR) vs 3D printed models of congenital heart disease in resident and nurse practitioner educational experience
Authors (first, second and last of 5)
- Jonathan Awori
- Seth D. Friedman
- Sujatha Buddhe
- Content type: Research
- Open Access
- Published: 11 February 2023
- Article: 2
-
Advanced Image Segmentation and Modeling – A Review of the 2021–2022 Thematic Series
Authors
- Prashanth Ravi
- Content type: Review
- Open Access
- Published: 24 January 2023
- Article: 1