Volume 8, issue 1, December 2022
35 articles in this issue
-
-
Using human factors principles to redesign a 3D lab workflow during the COVID-19 pandemic
Authors (first, second and last of 8)
- Ethan P. Larsen
- Elizabeth Silvestro
- Flaura K. Winston
- Content type: Research
- Open Access
- Published: 12 November 2022
- Article: 34
-
Morphometric analysis of patient-specific 3D-printed acetabular cups: a comparative study of commercially available implants from 6 manufacturers
Authors (first, second and last of 6)
- Harry Hothi
- Johann Henckel
- Alister Hart
- Content type: Research
- Open Access
- Published: 07 November 2022
- Article: 33
-
3D printed model for triple negative inflammatory breast cancer
Authors
- Yu-Hui Huang
- Todd M. Tuttle
- Noelle Hoven
- Content type: Case Report
- Open Access
- Published: 03 November 2022
- Article: 32
This is part of 1 collection: -
Adapting a simple surgical manual tool to a 3D printed implantology protocol: the use of a universal screwdriver for fixation of custom-made laser sintered titanium subperiosteal implants
Authors
- Mustafa Ayna
- Aydin Gülses
- Content type: Methodology
- Open Access
- Published: 27 October 2022
- Article: 31
-
Three-dimensional bioprinting of mucoadhesive scaffolds for the treatment of oral mucosal lesions; an in vitro study
Authors
- Maryam Koopaie
- Duha Hayder Mohammad Ali Nassar
- Mahvash Shokrolahi
- Content type: Research
- Open Access
- Published: 28 September 2022
- Article: 30
-
Translational design for limited resource settings as demonstrated by Vent-Lock, a 3D-printed ventilator multiplexer
Authors (first, second and last of 20)
- Helen Xun
- Christopher Shallal
- Julie Caffrey
- Content type: Research
- Open Access
- Published: 14 September 2022
- Article: 29
This is part of 2 collections: -
Evaluating surface coatings to reduce bone cement adhesion to point of care 3D printed molds in the intraoperative setting
Authors (first, second and last of 5)
- Brian Beitler
- Gregory R. Roytman
- Daniel H. Wiznia
- Content type: Research
- Open Access
- Published: 12 August 2022
- Article: 28
This is part of 2 collections: -
3D-printed mouthpiece adapter for sampling exhaled breath in medical applications
Authors (first, second and last of 5)
- Y Lan Pham
- Jonathan Beauchamp
- Olaf Holz
- Content type: Methodology
- Open Access
- Published: 09 August 2022
- Article: 27
This is part of 2 collections: -
Correction: Accuracy of guide wire placement for femoral neck stabilization using 3D printed drill guides
Authors (first, second and last of 8)
- Gregory R. Roytman
- Alim F. Ramji
- Daniel H. Wiznia
- Content type: Correction
- Open Access
- Published: 09 August 2022
- Article: 26
-
Stereolithography (STL) measurement rubric for the evaluation of craniomaxillofacial STLs
Authors
- Henra Muller
- Annabel Fossey
- Content type: Research
- Open Access
- Published: 08 August 2022
- Article: 25
-
Mathematical surface function-based design and 3D printing of airway stents
Authors
- Bengi Yilmaz
- Bilge Yilmaz Kara
- Content type: Research
- Open Access
- Published: 06 August 2022
- Article: 24
This is part of 2 collections: -
Workflow to develop 3D designed personalized neonatal CPAP masks using iPhone structured light facial scanning
Authors (first, second and last of 7)
- Amika A. Kamath
- Marielle J. Kamath
- Mark E. Wylam
- Content type: Methodology
- Open Access
- Published: 01 August 2022
- Article: 23
-
3D printed integrated bolus/headrest for radiation therapy for malignancies involving the posterior scalp and neck
Authors (first, second and last of 6)
- Eric J. Hsu
- David Parsons
- Dat T. Vo
- Content type: Case Study
- Open Access
- Published: 18 July 2022
- Article: 22
-
From the ground up: understanding the developing infrastructure and resources of 3D printing facilities in hospital-based settings
Authors (first, second and last of 5)
- Kristy M. Shine
- Lauren Schlegel
- Robert Pugliese
- Content type: Research
- Open Access
- Published: 11 July 2022
- Article: 21
-
Evaluating the value of a 3D printed model for hands-on training of gynecological pelvic examination
Authors (first, second and last of 8)
- Matthias Kiesel
- Inga Beyers
- Joachim Diessner
- Content type: Research
- Open Access
- Published: 06 July 2022
- Article: 20
-
Accuracy of guide wire placement for femoral neck stabilization using 3D printed drill guides
Authors (first, second and last of 8)
- Gregory R. Roytman
- Alim F. Ramji
- Daniel H. Wiznia
- Content type: Research
- Open Access
- Published: 04 July 2022
- Article: 19
This is part of 2 collections: -
Algorithms used in medical image segmentation for 3D printing and how to understand and quantify their performance
Authors
- Magdalene Fogarasi
- James C. Coburn
- Beth Ripley
- Content type: Research
- Open Access
- Published: 24 June 2022
- Article: 18
-
3D printing for surgical planning of canine oral and maxillofacial surgeries
Authors (first, second and last of 4)
- Yu-Hui Huang
- Bonnie Lee
- Stephanie L. Goldschmidt
- Content type: Case Report
- Open Access
- Published: 09 June 2022
- Article: 17
This is part of 2 collections: -
3D printed models in pregnancy and its utility in improving psychological constructs: a case series
Authors
- John Joseph Coté
- Brayden Patric Coté
- Amy S. Badura-Brack
- Content type: Case Report
- Open Access
- Published: 09 June 2022
- Article: 16
-
Evaluating a novel 3D printed model for simulating Large Loop Excision of the Transformation Zone (LLETZ)
Authors (first, second and last of 8)
- Matthias Kiesel
- Inga Beyers
- Joachim Diessner
- Content type: Research
- Open Access
- Published: 08 June 2022
- Article: 15
-
Dimensional variability characterization of additively manufactured lattice coupons
Authors (first, second and last of 8)
- Kirstie Lane Snodderly
- Magdalene Fogarasi
- Matthew Di Prima
- Content type: Research
- Open Access
- Published: 07 May 2022
- Article: 14
-
A 3D printed model of the female pelvis for practical education of gynecological pelvic examination
Authors (first, second and last of 8)
- Matthias Kiesel
- Inga Beyers
- Christine Wulff
- Content type: Research
- Open Access
- Published: 05 May 2022
- Article: 13
-
Digital workflow for fabrication of bespoke facemask in burn rehabilitation with smartphone 3D scanner and desktop 3D printing: clinical case study
Authors (first, second and last of 6)
- Bushra Alhazmi
- Feras Alshomer
- Deepak M. Kalaskar
- Content type: Research
- Open Access
- Published: 04 May 2022
- Article: 12
-
Clinical 3D modeling to guide pediatric cardiothoracic surgery and intervention using 3D printed anatomic models, computer aided design and virtual reality
Authors (first, second and last of 8)
- Reena M. Ghosh
- Matthew A. Jolley
- Kevin K. Whitehead
- Content type: Research
- Open Access
- Published: 21 April 2022
- Article: 11
-
Comparison of fluid dynamics changes due to physical activity in 3D printed patient specific coronary phantoms with the Windkessel equivalent model of coronary flow
Authors (first, second and last of 4)
- Kelsey N. Sommer
- Mohammad Mahdi Shiraz Bhurwani
- Ciprian N. Ionita
- Content type: Research
- Open Access
- Published: 07 April 2022
- Article: 10
-
A robust, autonomous, volumetric quality assurance method for 3D printed porous scaffolds
Authors (first, second and last of 5)
- Nicholas Zhang
- Srujan Singh
- Warren L. Grayson
- Content type: Research
- Open Access
- Published: 06 April 2022
- Article: 9
-
Optical scan and 3D printing guided radiation therapy – an application and provincial experience in cutaneous nasal carcinoma
Authors (first, second and last of 6)
- Jui Chih Cheng
- Arbind Dubey
- Shrinivas Rathod
- Content type: Research
- Open Access
- Published: 29 March 2022
- Article: 8
-
Interpretation of regulatory factors for 3D printing at hospitals and medical centers, or at the point of care
Authors (first, second and last of 7)
- Brian G. Beitler
- Paul F. Abraham
- Daniel H. Wiznia
- Content type: Review
- Open Access
- Published: 01 February 2022
- Article: 7
-
The impact of regulation, reimbursement, and research on the value of 3D printing and other 3D procedures in medicine
Authors
- Frank J. Rybicki
- Content type: Editorial
- Open Access
- Published: 31 January 2022
- Article: 6
-
Clinical acceptance of advanced visualization methods: a comparison study of 3D-print, virtual reality glasses, and 3D-display
Authors (first, second and last of 4)
- Julian Louis Muff
- Tobias Heye
- Philipp Brantner
- Content type: Research
- Open Access
- Published: 30 January 2022
- Article: 5
-
Patient-specific 3D-printed helmet for post-craniectomy defect – a case report
Authors (first, second and last of 6)
- Sherby Suet-Ying Pang
- Evan Fang
- Christian Fang
- Content type: Case report
- Open Access
- Published: 28 January 2022
- Article: 4
-
3D printing of nanocomposite pills through desktop vat photopolymerization (stereolithography) for drug delivery reasons
Authors (first, second and last of 5)
- Peeyush Kumar Sharma
- Dinesh Choudhury
- Subham Banerjee
- Content type: Research
- Open Access
- Published: 17 January 2022
- Article: 3
This is part of 1 collection: -
A computational fluid dynamics assessment of 3D printed ventilator splitters and restrictors for differential multi-patient ventilation
Authors (first, second and last of 5)
- Daniel J. Duke
- Alexander L. Clarke
- Shaun D. Gregory
- Content type: Research
- Open Access
- Published: 05 January 2022
- Article: 2
-
Design, inverted vat photopolymerization 3D printing, and initial characterization of a miniature force sensor for localized in vivo tissue measurements
Authors
- Shashank S. Kumat
- Panos S. Shiakolas
- Content type: Research
- Open Access
- Published: 04 January 2022
- Article: 1
This is part of 1 collection: