Volume 7, issue 1, December 2021
37 articles in this issue
-
-
An open-access and inexpensive 3D printed otoscope for low-resource settings and health crises
Authors
- Matteo Capobussi
- Lorenzo Moja
- Content type: Technical Note
- Open Access
- Published: 17 November 2021
- Article: 36
This is part of 1 collection: -
3D printed customised external cranial plate in a patient with syndrome of trephined: ‘a case report’
Authors (first, second and last of 14)
- Mee H.
- Greasley S.
- Helmy A.
- Content type: Case report
- Open Access
- Published: 12 November 2021
- Article: 35
-
A workflow to generate patient-specific three-dimensional augmented reality models from medical imaging data and example applications in urologic oncology
Authors (first, second and last of 7)
- Nicole Wake
- Andrew B. Rosenkrantz
- Hersh Chandarana
- Content type: Technical Note
- Open Access
- Published: 28 October 2021
- Article: 34
-
Design and 3D-printing of MRI-compatible cradle for imaging mouse tumors
Authors (first, second and last of 5)
- Deborah L. Donohoe
- Katherine Dennert
- Alexander J. Sherman
- Content type: Research
- Open Access
- Published: 19 October 2021
- Article: 33
-
Use of patient specific 3D printed neurovascular phantoms to simulate mechanical thrombectomy
Authors (first, second and last of 9)
- Kelsey N. Sommer
- Mohammad Mahdi Shiraz Bhurwani
- Ciprian N. Ionita
- Content type: Research
- Open Access
- Published: 27 September 2021
- Article: 32
-
3D printed composite model of pelvic osteochondroma and nerve roots
Authors
- Olivia Fox
- Andrew Kanawati
- Content type: Case report
- Open Access
- Published: 25 September 2021
- Article: 31
-
3-D generated anatomic custom talar cement spacers: case reports, technical tips and literature review
Authors (first, second and last of 6)
- Kimberly K. Broughton
- Bonnie Chien
- John Y. Kwon
- Content type: Case report
- Open Access
- Published: 17 September 2021
- Article: 30
-
Does vaporized hydrogen peroxide sterilization affect the geometrical properties of anatomic models and guides 3D printed from computed tomography images?
Authors (first, second and last of 4)
- Mauricio Toro
- Aura Cardona
- Laura Buitrago
- Content type: Research
- Open Access
- Published: 14 September 2021
- Article: 29
-
Compliant vascular models 3D printed with the Stratasys J750: a direct characterization of model distensibility using intravascular ultrasound
Authors (first, second and last of 9)
- Adam J. Sparks
- Cody M. Smith
- Adnan H. Siddiqui
- Content type: Research
- Open Access
- Published: 03 September 2021
- Article: 28
-
Point-of-care 3D printing: a low-cost approach to teaching carotid artery stenting
Authors (first, second and last of 4)
- Pieter De Backer
- Charlotte Allaeys
- Roel Beelen
- Content type: Research
- Open Access
- Published: 02 September 2021
- Article: 27
-
3D models improve understanding of congenital heart disease
Authors (first, second and last of 7)
- Jonathan Awori
- Seth D. Friedman
- Sujatha Buddhe
- Content type: Research
- Open Access
- Published: 02 September 2021
- Article: 26
-
Design and 3D printing of variant pediatric heart models for training based on a single patient scan
Authors (first, second and last of 8)
- Carina Hopfner
- Andre Jakob
- Nikolaus A. Haas
- Content type: Technical Note
- Open Access
- Published: 31 August 2021
- Article: 25
-
Methods of 3D printing models of pituitary tumors
Authors (first, second and last of 14)
- Daniel Gillett
- Waiel Bashari
- Mark Gurnell
- Content type: Research
- Open Access
- Published: 31 August 2021
- Article: 24
This is part of 2 collections: -
A focused simulation-based optimization of print time and material usage with respect to orientation, layer height and support settings for multi-pathological anatomical models in inverted vat photopolymerization 3D printing
Authors
- Prashanth Ravi
- Victoria C. P. Chen
- Content type: Research
- Open Access
- Published: 26 August 2021
- Article: 23
This is part of 2 collections: -
Innovative design of 3D-printed nasopharyngeal pediatric swab for COVID-19 detection
Authors (first, second and last of 8)
- Ameerah Alazemi
- Ghadeer AbdulHussain
- Salman Al-Sabah
- Content type: Technical Note
- Open Access
- Published: 20 August 2021
- Article: 22
-
Needle penetration test - qualifying examination of 3D printable silicones for vascular models in surgical practice
Authors (first, second and last of 5)
- Thore von Steuben
- Christoph Salewski
- Sebastian Spintzyk
- Content type: Research
- Open Access
- Published: 13 August 2021
- Article: 21
-
Reusability of autoclaved 3D printed polypropylene compared to a glass filled polypropylene composite
Authors
- Kristin M. Fischer
- Andrew P. Howell
- Content type: Research
- Open Access
- Published: 09 August 2021
- Article: 20
-
Correction to: Applications of 3D printing in breast cancer management
Authors (first, second and last of 8)
- Arpine Galstyan
- Michael J. Bunker
- Tatiana Kelil
- Content type: Correction
- Open Access
- Published: 07 July 2021
- Article: 19
-
Computer-assisted subcapital correction osteotomy in slipped capital femoral epiphysis using individualized drill templates
Authors (first, second and last of 6)
- Sima Zakani
- Christopher Chapman
- David R. Wilson
- Content type: Research
- Open Access
- Published: 06 July 2021
- Article: 18
-
A review and guide to creating patient specific 3D printed anatomical models from MRI for benign gynecologic surgery
Authors (first, second and last of 5)
- Teresa E. Flaxman
- Carly M. Cooke
- Sukhbir S. Singh
- Content type: Review
- Open Access
- Published: 05 July 2021
- Article: 17
-
Sterilization and sanitizing of 3D-printed personal protective equipment using polypropylene and a Single Wall design
Authors (first, second and last of 10)
- Karstan Luchini
- Shelly N. B. Sloan
- Bradley A. Creamer
- Content type: Research
- Open Access
- Published: 11 June 2021
- Article: 16
-
Introducing 3D printed models of the upper urinary tract for high-fidelity simulation of retrograde intrarenal surgery
Authors (first, second and last of 7)
- Luca Orecchia
- Diego Manfrin
- Roberto Miano
- Content type: Research
- Open Access
- Published: 07 June 2021
- Article: 15
-
The key role of 3D printing and the new medical sterilizable threads in the development of the translaryngeal Tracheostomy Needle Introducer
Authors (first, second and last of 5)
- Alessandro Terrani
- Enrico Bassi
- Giuseppe Foti
- Content type: Technical Note
- Open Access
- Published: 12 May 2021
- Article: 14
-
3D-printed saw guides for lower arm osteotomy, a comparison between a synthetic CT and CT-based workflow
Authors (first, second and last of 11)
- Koen Willemsen
- Mirte H. M. Ketel
- Ralph J. B. Sakkers
- Content type: Research
- Open Access
- Published: 29 April 2021
- Article: 13
-
Multi-color and Multi-Material 3D Printing of Knee Joint models
Authors
- Oliver Grimaldo Ruiz
- Yasin Dhaher
- Content type: Research
- Open Access
- Published: 29 April 2021
- Article: 12
-
Point-of-care manufacturing: a single university hospital’s initial experience
Authors (first, second and last of 22)
- Jose Antonio Calvo-Haro
- Javier Pascau
- Rubén Perez-Mañanes
- Content type: Research
- Open Access
- Published: 22 April 2021
- Article: 11
-
Systematic review of three-dimensional printing for simulation training of interventional radiology trainees
Authors (first, second and last of 5)
- Chase Tenewitz
- Rebecca T. Le
- Travis E. Meyer
- Content type: Research
- Open Access
- Published: 21 April 2021
- Article: 10
-
3D printing in neurosurgery education: a review
Authors
- Grace M. Thiong’o
- Mark Bernstein
- James M. Drake
- Content type: Review
- Open Access
- Published: 23 March 2021
- Article: 9
-
A guideline for 3D printing terminology in biomedical research utilizing ISO/ASTM standards
Authors (first, second and last of 6)
- Amy E. Alexander
- Nicole Wake
- Kenneth C. Wang
- Content type: Review
- Open Access
- Published: 22 March 2021
- Article: 8
-
Application of 3D printing and distributed manufacturing during the first-wave of COVID-19 pandemic. Our experience at a third-level university hospital
Authors (first, second and last of 10)
- Rubén Perez-Mañanes
- Sonia GarcÃa-de San José
- José Antonio Calvo-Haro
- Content type: Case study
- Open Access
- Published: 08 March 2021
- Article: 7
-
Applications of 3D printing in breast cancer management
Authors (first, second and last of 8)
- Arpine Galstyan
- Michael J. Bunker
- Tatiana Kelil
- Content type: Review
- Open Access
- Published: 09 February 2021
- Article: 6
-
Correction to: Urgent need hybrid production - what COVID-19 can teach us about dislocated production through 3d-printing and the maker scene
Authors
- Sascha Hartig
- Sven Duda
- Lennart Hildebrandt
- Content type: Correction
- Open Access
- Published: 08 February 2021
- Article: 5
-
Cranioplasty with three-dimensional customised mould for polymethylmethacrylate implant: a series of 16 consecutive patients with cost-effectiveness consideration
Authors (first, second and last of 7)
- Erasmo Barros da Silva Júnior
- Afonso Henrique de Aragão
- Ricardo Ramina
- Content type: Technical Note
- Open Access
- Published: 06 February 2021
- Article: 4
-
Precision of computed tomography and cartilage-reproducing image reconstruction method in generating digital model for potential use in 3D printing of patient-specific radial head prosthesis: a human cadaver study
Authors (first, second and last of 6)
- Suriya Luenam
- Theeraset Bantuchai
- Chedtha Puncreobutr
- Content type: Research
- Open Access
- Published: 28 January 2021
- Article: 3
-
Use of tracheobronchial tree 3-dimensional printed model: does it improve trainees’ understanding of segmentation anatomy? A prospective study
Authors (first, second and last of 5)
- Christian O’Brien
- Carolina A. Souza
- Timothy Wood
- Content type: Research
- Open Access
- Published: 06 January 2021
- Article: 2
-
Comparing cost and print time estimates for six commercially-available 3D printers obtained through slicing software for clinically relevant anatomical models
Authors
- Joshua V. Chen
- Alan B. C. Dang
- Alexis Dang
- Content type: Research
- Open Access
- Published: 06 January 2021
- Article: 1