Volume 5, issue 1, December 2019

17 articles in this issue

Creating patient-specific anatomical models for 3D printing and AR/VR: a supplement for the 2018 Radiological Society of North America (RSNA) hands-on course

Authors (first, second and last of 7)
- Nicole Wake
- Amy E. Alexander
- Jane Matsumoto
- Content type: Technical Note
- Open Access
- Published: 30 December 2019
- Article: 17
This is part of 1 collection:
Early career research in 3D Printing in Medicine
3D printed PLA Army-Navy retractors when used as linear retractors yield clinically acceptable tolerances

Authors (first, second and last of 4)
- Joshua V. Chen
- Alexis B. C. Dang
- Alan B. C. Dang
- Content type: Research
- Open Access
- Published: 21 November 2019
- Article: 16
Comparative analysis of current 3D printed acetabular titanium implants

Authors (first, second and last of 6)
- Lorenzo Dall’Ava
- Harry Hothi
- Alister Hart
- Content type: Research
- Open Access
- Published: 06 November 2019
- Article: 15
Publisher Correction to: 3D Printing in Medicine, volume 5

Authors
- 3D Printing in Medicine
- Content type: Publisher Correction
- Open Access
- Published: 20 August 2019
- Article: 14
Comparative assessment of anatomical details of thoracic limb bones of a horse to that of models produced via scanning and 3D printing

Authors (first, second and last of 4)
- Daniela de Alcântara Leite dos Reis
- Beatriz Laura Rojas Gouveia
- Antônio Chaves de Assis Neto
- Content type: Research
- Open Access
- Published: 02 August 2019
- Article: 13
Customized tracheal design using 3D printing of a polymer hydrogel: influence of UV laser cross-linking on mechanical properties

Authors (first, second and last of 10)
- Ana Filipa Cristovão
- David Sousa
- Isabel Ferreira
- Content type: Research
- Open Access
- Published: 02 August 2019
- Article: 12
Advanced 3D printed model of middle cerebral artery aneurysms for neurosurgery simulation

Authors (first, second and last of 5)
- Ruth G. Nagassa
- Paul G. McMenamin
- Jeffrey V. Rosenfeld
- Content type: Research
- Open Access
- Published: 01 August 2019
- Article: 11
Novel design and development of a 3D-printed conformal superficial brachytherapy device for the treatment of non-melanoma skin cancer and keloids

Authors (first, second and last of 7)
- Jennifer Chmura
- Arthur Erdman
- Clara Ferreira
- Content type: Research
- Open Access
- Published: 22 July 2019
- Article: 10
This is part of 1 collection:
Early career research in 3D Printing in Medicine
A digital workflow for modeling of custom dental implants

Authors
- Andrejus Surovas
- Content type: Technical Note
- Open Access
- Published: 06 June 2019
- Article: 9
MRI-driven design of customised 3D printed gynaecological brachytherapy applicators with curved needle channels

Authors (first, second and last of 4)
- Rianne C. Laan
- Remi A. Nout
- Nick J. van de Berg
- Content type: Research
- Open Access
- Published: 16 May 2019
- Article: 8
Assessment of body-powered 3D printed partial finger prostheses: a case study

Authors
- Keaton J. Young
- James E. Pierce
- Jorge M. Zuniga
- Content type: Case study
- Open Access
- Published: 02 May 2019
- Article: 7
Methods for verification of 3D printed anatomic model accuracy using cardiac models as an example

Authors (first, second and last of 8)
- Mohammad Odeh
- Dmitry Levin
- Beth Ripley
- Content type: Research
- Open Access
- Published: 29 March 2019
- Article: 6
This is part of 1 collection:
Early career research in 3D Printing in Medicine
Analysis of biomechanical behavior of 3D printed mandibular graft with porous scaffold structure designed by topological optimization

Authors (first, second and last of 6)
- Jiajie Hu
- Joanne H. Wang
- Dale A. Baur
- Content type: Research
- Open Access
- Published: 14 March 2019
- Article: 5
Patient-specific 3D printed and augmented reality kidney and prostate cancer models: impact on patient education

Authors (first, second and last of 9)
- Nicole Wake
- Andrew B. Rosenkrantz
- Hersh Chandarana
- Content type: Research
- Open Access
- Published: 19 February 2019
- Article: 4
This is part of 1 collection:
Early career research in 3D Printing in Medicine
Dose calibration of Gafchromic EBT3 film for Ir-192 brachytherapy source using 3D-printed PLA and ABS plastics

Authors (first, second and last of 6)
- Courtney Oare
- Christopher Wilke
- Clara Ferreira
- Content type: Research
- Open Access
- Published: 06 February 2019
- Article: 3
This is part of 1 collection:
Early career research in 3D Printing in Medicine
Low cost additive manufacturing of microneedle masters

Authors
- Ashley R. Johnson
- Adam T. Procopio
- Content type: Research
- Open Access
- Published: 04 February 2019
- Article: 2
Utility of virtual monoenergetic images from spectral detector computed tomography in improving image segmentation for purposes of 3D printing and modeling

Authors (first, second and last of 6)
- Elias Kikano
- Nils Grosse Hokamp
- Amit Gupta
- Content type: Research
- Open Access
- Published: 18 January 2019
- Article: 1
This is part of 1 collection:
Early career research in 3D Printing in Medicine

Volume 5, issue 1, December 2019

Creating patient-specific anatomical models for 3D printing and AR/VR: a supplement for the 2018 Radiological Society of North America (RSNA) hands-on course

3D printed PLA Army-Navy retractors when used as linear retractors yield clinically acceptable tolerances

Comparative analysis of current 3D printed acetabular titanium implants

Publisher Correction to: 3D Printing in Medicine, volume 5

Comparative assessment of anatomical details of thoracic limb bones of a horse to that of models produced via scanning and 3D printing

Customized tracheal design using 3D printing of a polymer hydrogel: influence of UV laser cross-linking on mechanical properties

Advanced 3D printed model of middle cerebral artery aneurysms for neurosurgery simulation

Novel design and development of a 3D-printed conformal superficial brachytherapy device for the treatment of non-melanoma skin cancer and keloids

A digital workflow for modeling of custom dental implants

MRI-driven design of customised 3D printed gynaecological brachytherapy applicators with curved needle channels

Assessment of body-powered 3D printed partial finger prostheses: a case study

Methods for verification of 3D printed anatomic model accuracy using cardiac models as an example

Analysis of biomechanical behavior of 3D printed mandibular graft with porous scaffold structure designed by topological optimization

Patient-specific 3D printed and augmented reality kidney and prostate cancer models: impact on patient education

Dose calibration of Gafchromic EBT3 film for Ir-192 brachytherapy source using 3D-printed PLA and ABS plastics

Low cost additive manufacturing of microneedle masters

Utility of virtual monoenergetic images from spectral detector computed tomography in improving image segmentation for purposes of 3D printing and modeling

For authors

Explore

Navigation

Volume 5, issue 1, December 2019

Authors (first, second and last of 7)

Authors (first, second and last of 4)

Authors (first, second and last of 6)

Authors

Authors (first, second and last of 4)

Authors (first, second and last of 10)

Authors (first, second and last of 5)

Authors (first, second and last of 7)

Authors

Authors (first, second and last of 4)

Authors

Authors (first, second and last of 8)

Authors (first, second and last of 6)

Authors (first, second and last of 9)

Authors (first, second and last of 6)

Authors

Authors (first, second and last of 6)

For authors

Explore

Search

Navigation