1. Effects of in-service strain on girth weld failure of an X80 pipeline

   • Chen Hongyuan
   • Gao Xiongxiong
   • Huo Chunyong

   Technical Paper 23 May 2024 Article: 383

   

2. Versatile 3D-printed fin-ray effect soft robotic fingers: lightweight optimization and performance analysis

   • Gidugu Lakshmi Srinivas
   • Arshad Javed
   • Lisa Marie Faller

   Technical Paper Open access 23 May 2024 Article: 382

   

3. Octorotor flight control system design with stochastic optimal tuning, deep learning and differential morphing

   • Oguz Kose

   Technical Paper 23 May 2024 Article: 381

   

4. Effects of clearances on dynamic response and nonlinear characteristics of the planar multibody mechanical system

   • Xiulong Chen
   • Hang Li
   • Tao Wang

   Technical Paper 23 May 2024 Article: 380

   

5. Experimental and numerical analysis of the fracture behavior of an epoxy-based marine coating under static tension and accelerated aging effect in NaCl solution

   • Y. Madani
   • K. Madani
   • B. Peraudeau

   Technical Paper 23 May 2024 Article: 379

   

6. Magneto hydrodynamic boundary layer flow of ternary hybrid nano-fluid (\({{\text{TiO}}}_{2}- {{\text{SiO}}}_{2, }- {{\text{Al}}}_{2}{{\text{O}}}_{3}/{{\text{H}}}_{2}{\text{O}}-{{\text{C}}}_{2}{{\text{H}}}_{6}{{\text{O}}}_{2}\)) a numerical and analytical Investigations

   • Mohamed Kezzar
   • Noureddine Nafir
   • Ismail Tabet

   Technical Paper 23 May 2024 Article: 378

   

7. Research on hydraulic optimization design method of water-jet propulsion pump considering hump index

   • Yun Long
   • YingYing Zheng
   • RongSheng Zhu

   Technical Paper 22 May 2024 Article: 377

   

8. Rigid fixation of the sternum: a comparative biomechanical study

   • Süleyman Nazif Orhan
   • Eda Alkan

   Technical Paper 22 May 2024 Article: 376

   

9. Automatic control and stability analysis of a novel stepper motor-driven orbitrol valve operated articulated steering mechanism

   • R. Sreeharsha
   • Niranjan Kumar
   • Ajit Kumar

   Technical Paper 21 May 2024 Article: 375

   

10. Rotation angle vibration suppression for variable-length flexible manipulator based on neural network identification with sliding-mode controller

    • Xiaopeng Li
    • Lai Wei
    • Sainan Zhou

    Technical Paper 21 May 2024 Article: 374

    

11. Parametric analysis of sloshing in concrete liquid storage tanks: a FE-SPH coupled approach with Box-Behnken design of experiments

    • Pouya Soltani
    • Hassan Mirzabozorg

    Technical Paper 21 May 2024 Article: 373

    

12. Comparative study of parabolic trough and linear Fresnel collectors from advanced exergy point of view

    • Mahdi Maghsoudizadeh
    • Mehran Ameri
    • Ebrahim Jahanshahi Javaran

    Technical Paper 21 May 2024 Article: 372

    

13. Computational study of reducing wind loads on solar-power plants using windbreaks

    • Ibrahim Hamed
    • Ahmed Farouk AbdelGawad
    • Reda Ragab

    Technical Paper 21 May 2024 Article: 371

    

14. Evaluating dynamic, fluid flow and performance parameters of piezoelectric based micro-blower: a two-dimensional axisymmetric numerical approach

    • K. Velmurugan
    • Adarsh Shrivastav
    • S. Karunanidhi

    Technical Paper 20 May 2024 Article: 370

    

15. ANN model of a triple-junction cell in concentrating photovoltaic system

    • C. Renno
    • A. Perone
    • O. Di Marino

    Technical Paper Open access 20 May 2024 Article: 369

    

16. Analytical and numerical solution of generalized static analysis of tall buildings: double-beam systems Timoshenko

    • Mao Cristian Pinto-Cruz

    Technical Paper 20 May 2024 Article: 368

    

17. Bearing condition monitoring via an unsupervised and enhanced stacked auto-encoder

    • Fan Xu
    • Zhenyu Hao
    • Yaling Deng

    Technical Paper 19 May 2024 Article: 367

    

18. Comparative study of static and dynamic characteristics of non-pneumatic tires with gradient honeycomb structure

    • Jian Yang
    • Hai-feng Zhou
    • Guo-lin Wang

    Technical Paper 19 May 2024 Article: 366

    

19. Dynamic response characteristics of axially moving plates subjected to moving load

    • Mingjun Song
    • Guo Yao
    • Yongheng Yu

    Technical Paper 19 May 2024 Article: 365

    

20. Energy absorption characteristics of a double-filled sinusoidal corrugated filled tube under axial impact

    • Xiaolin Deng
    • Fumo Yang

    Technical Paper 17 May 2024 Article: 364

    

21. Design of a large stroke compliant gripping mechanism for constant-force applications

    • Ching-Wei Lo
    • Yuan Chang
    • Jyh-Jone Lee

    Technical Paper 17 May 2024 Article: 363

    

22. Design and performance optimization of texture arrangement scheme for foil face gas seal with super-elliptical hole texture

    • Yuan Chen
    • Junjie Zhang
    • Bingqing Wang

    Technical Paper 17 May 2024 Article: 362

    

23. Metaheuristics applied to the thermographic detection of multicentric breast tumor

    • Jan P. A. S. Rocha
    • Felipe S. Loureiro
    • Helio J. C. Barbosa

    Technical Paper 17 May 2024 Article: 361

    

24. Intra-element versus inter-element crack propagation: the numerical extensometer approach

    • David Leonardo Nascimento de Figueiredo Amorim
    • Ricardo Picón
    • Julio Flórez-López

    Technical Paper 15 May 2024 Article: 360

    

25. Performance of end-capped multi-segmented conical tubes filled with foam under axial and oblique loads as an energy absorber

    • Mohammad Javad Rezvani
    • Hamidreza Souzangarzadeh

    Technical Paper 14 May 2024 Article: 359

    

26. Energy efficient walking: combining height variation of the center of mass and curved feet

    • Caroline C. D. Silva
    • Marco R. O. A. Maximo
    • Luiz C. S. Góes

    Technical Paper 13 May 2024 Article: 358

    

27. An inverse method of fundamental solutions for the identification of 2D elastic properties of anisotropic solids

    • M. R. Hematiyan
    • A. Khosravifard
    • Y. C. Shiah

    Technical Paper 13 May 2024 Article: 357

    

28. Investigations on microstructure, crystallographic texture evolution, residual stress and mechanical properties of additive manufactured nickel-based superalloy for aerospace applications: role of industrial ageing heat treatment

    • Praveenkumar Vijayakumar
    • S. Raja
    • G. L. Balaji

    Technical Paper 13 May 2024 Article: 356

    

29. Thermal error reduction in CNC lathe with epoxy granite bed using thermo-structural optimization

    • Venkata Ramana Mula
    • Thyla Pudukarai Ramaswamy
    • Mahendrakumar Nataraj

    Technical Paper 12 May 2024 Article: 355

    

30. Performance evaluation of absorption cooling system for air conditioning-based novel trigeneration system using solar energy

    • Shobhit Mishra
    • Raj Kumar Singh

    Technical Paper 12 May 2024 Article: 354

    

31. Exergy and exergoeconomic comparative analysis of three NH₃–NaSCN absorption refrigeration cycles driven by solar collector

    • Reyhaneh Rabiei
    • Mehdi Borji Bodaghi
    • Admin Kazemi

    Technical Paper 11 May 2024 Article: 353

    

32. Convolutional neural network for leak location in buried pipes of underground water supply

    • Otávio D. Z. Boaventura
    • Matheus S. Proença
    • Amarildo T. Paschoalini

    Technical Paper 10 May 2024 Article: 352

    

33. 4E feasibility analysis of a low-emissions multi-generation system operating at different hierarchical levels in geothermal cascade

    • Víctor M. Ambriz-Díaz
    • Oscar Chavéz
    • F. A. Godínez

    Technical Paper 10 May 2024 Article: 351

    

34. Evaluating the impact resistance of double-layered aluminum alloy plates with diverse shapes against blunt rigid projectiles

    • Tiechun Zhang
    • Zhongshan Wang
    • Yunfei Deng

    Technical Paper 10 May 2024 Article: 350

    

35. Experimental and numerical investigation to determine the optimal blank-holder force in deep drawing process based on forming force for SS304L and St14 sheets

    • Aliakbar Asgharpour
    • Hamid Gorji
    • Seyed Ehsan Delpazir

    Technical Paper 09 May 2024 Article: 349

    

36. Lattice numerical modeling of the effects of synthetic gas flow rate and pre-existing cleat dimensions on the crack propagation and cavity growth in UCG process

    • Mohammadreza Shahbazi
    • Mehdi Najafi
    • Abolfazl Abdollahipour

    Technical Paper 09 May 2024 Article: 348

    

37. Analysis of the performance of carbon fiber patches on improving the failure strength of a damaged and repaired plate

    • N. H. Sebaibi
    • R. Mhamdia
    • R. D. S. G. Campilho

    Technical Paper 09 May 2024 Article: 347

    

38. Research on performance failure caused by gas blocking in multiphase mixed-transport pump under non-uniform inflow conditions

    • Hui Quan
    • Zhisheng Wang
    • Houde Su

    Technical Paper 09 May 2024 Article: 346

    

39. The modeling and analysis of vibration response with airdrop vehicle in landing process

    • Chenxi Zhang
    • Youqun Zhao
    • Danyang Li

    Technical Paper 08 May 2024 Article: 345

    

40. Experimental study of flat-collared hemispherical shells under shock loading

    • P. K. Sharma
    • B. P. Patel
    • P. K. Thakur

    Technical Paper 08 May 2024 Article: 344

    

41. Influence of zinc ethyl silicate primer with different fluoride concentrations on FCAW overlayer weld

    • Leonardo Schiavo de Rezende
    • Lorena Arco Verde
    • Cláudio Turani Vaz

    Technical Paper 08 May 2024 Article: 343

    

42. Multifunctional silicon carbide/cement-based composites for porous aerostatic bearings

    • Heitor Camargo Melo
    • Júlio Cesar dos Santos
    • Túlio Hallak Panzera

    Technical Paper 07 May 2024 Article: 342

    

43. Studying the effect of design microscale factors on the thermoelastic response of carbon nanotube-reinforced metal nanocomposites using the finite element micromechanics method

    • M. Ahmadi
    • R. Ansari
    • M. K. Hassanzadeh-Aghdam

    Technical Paper 07 May 2024 Article: 341

    

44. Experimental investigation of crest-to-crest wave spring and new lattice structure with enhanced load bearing capacity

    • M. Venkata Subramanian
    • D. Singh
    • P. K. Karsh

    Technical Paper 06 May 2024 Article: 340

    

45. A state-of-the-art review on metal additive manufacturing: milestones, trends, challenges and perspectives

    • Pushkal Badoniya
    • Manu Srivastava
    • Sandeep Rathee

    Review Paper 06 May 2024 Article: 339

    

46. Mechanical analysis of a PEEK titanium alloy macro-composite hip stem by finite element method

    • Ali Tekin Guner
    • Sait Kocak
    • Cemal Meran

    Technical Paper 06 May 2024 Article: 338

    

47. Motor fault classification using hybrid short-time Fourier transform and wavelet transform with vibration signal and convolutional neural network

    • Leandro Ventricci
    • Ronny Francis Ribeiro Junior
    • Guilherme Ferreira Gomes

    Technical Paper 06 May 2024 Article: 337

    

48. An investigation of dynamic characteristics in rotor-bearing system with combined bearing and coupling defects

    • Ganesh L. Suryawanshi
    • Sachin K. Patil
    • Ramchandra G. Desavale

    Technical Paper 06 May 2024 Article: 336

    

49. Study on dynamic characteristics of centrifugal pump with the development of cavitation under low temperature conditions

    • Linhua Zhang
    • Bingxin Ge
    • Jingting Liu

    Technical Paper 05 May 2024 Article: 335

    

50. Evaluation of the energy absorbing capacity of the two combinations of TPMS structure subjected to different compressive strain rates

    • Ali Imran Ansari
    • Nazir Ahmad Sheikh
    • Navin Kumar

    Technical Paper 05 May 2024 Article: 334