1. Investigation and optimization of energy absorption performance of axially joined metal and composite foam-filled hybrid tubes

   • Dursun Meriç
   • Hasan Gedikli

   Technical Paper 02 May 2024 Article: 327

   

2. Visco-mechanical characterization of Molluscs (sea shell) biomimetics designs structures

   • Ali Imran Ansari
   • Nazir Ahmad Sheikh
   • Navin Kumar

   Technical Paper 01 May 2024 Article: 326

   

3. Laser micromachining on PMMA: an efficient fabrication of microchannels for sustainable microfluidic devices

   • Guruprasad Srikantaprasad
   • Nithin Tom Mathew
   • Sreekanth Vasudev Nagar

   Technical Paper 01 May 2024 Article: 325

   

4. Progress in automobile body processing technology: multi-material and lightweight strategies for saving energy and reducing emissions

   • Peixing Li
   • Zhongxiao Yan
   • Yimeng Yang

   Review Paper 01 May 2024 Article: 324

   

5. Nonlinear modeling for bearing fault diagnosis in non-stationary operating conditions

   • Mohammad Samavatian
   • Mehdi Behzad
   • Hamid Mehdigholi

   Technical Paper 30 April 2024 Article: 323

   

6. Surface roughness investigation for a novel magnetorheological finishing of cylindrical blind hole surfaces using a single magnetic tool

   • Ankit Aggarwal
   • Sunil Kumar Paswan
   • Anant Kumar Singh

   Technical Paper 29 April 2024 Article: 322

   

7. Influence of residual strength on progressive collapse of GFRP composite panels under transverse loading

   • A. R. Nazari
   • F. Taheri
   • M. Khanzadeh-Moradllo

   Technical Paper 29 April 2024 Article: 321

   

8. Control of a slender rotary system subjected to dry friction and rub

   • Adriano Domeny dos Santos
   • Agenor de Toledo Fleury

   Technical Paper 29 April 2024 Article: 320

   

9. Predictive modelling and optimization for machinability indicators in cleaner milling of PH13-8Mo using sustainable cutting environments

   • Hakan Yurtkuran
   • Mustafa Günay

   Technical Paper 29 April 2024 Article: 319

   

10. Experimental and numerical impact behavior of fully carbon fiber sandwiches for different core types

    • Ilyas Bozkurt
    • Mete Onur Kaman
    • Mustafa Albayrak

    Technical Paper 28 April 2024 Article: 318

    

11. Analysis of non-Darcy fluid flow in and around porous medium by the effects of its properties on body wake parameters

    • Mojtaba Rezapour
    • A. B. Khoshnevis
    • Mahdi Deymi-Dashtebayaz

    Technical Paper 28 April 2024 Article: 317

    

12. Dynamic and stability comparison analysis of the high-speed turbocharger rotor system with and without thrust bearing via machine learning schemes

    • Rajasekhara Reddy Mutra
    • J. Srinivas
    • Zahrah Yahya

    Technical Paper 28 April 2024 Article: 316

    

13. Energy absorption characteristics of corrugated hexagonal gradient hierarchical tube

    • Cuiping Huang
    • Xiaolin Deng

    Review Paper 27 April 2024 Article: 315

    

14. Thermal characteristics analysis of machine tool spindle with adjustable bearing preload

    • Jianping Li
    • Tao Xu
    • Shoujing Zhang

    Technical Paper 27 April 2024 Article: 314

    

15. The parameters optimization of robotic polishing with force controlled for mold steel based on Taguchi method

    • Jun Li
    • Weilong Huang
    • Mingyang Zhao

    Technical Paper 27 April 2024 Article: 313

    

16. Improvement in performance during micromachining of borosilicate glass with temperature-stirring-assisted ECDM

    • Dil Bahar
    • Akshay Dvivedi
    • Pradeep Kumar

    Technical Paper 27 April 2024 Article: 312

    

17. On damage location techniques and future prospects for industrial applications utilizing the electromechanical impedance method: a systematic review

    • Paulo Elias Carneiro Pereira
    • Stanley Washington Ferreira de Rezende
    • Roberto Mendes Finzi Neto

    Review Paper 27 April 2024 Article: 311

    

18. Design and simulation of a new type of composite flexible-spoke non-pneumatic tire

    • Shanqian Ni
    • Hongxun Fu
    • Jinyan Zhang

    Technical Paper 27 April 2024 Article: 310

    

19. Dynamic model of a joint of the manipulator and LQG control optimized with GA and PSO metaheuristics

    • Josias Batista
    • Darielson Souza
    • Clauson Rios

    Technical Paper 26 April 2024 Article: 309

    

20. Low-pressure gasoline direct injection system development and emissions analysis for a reciprocating two-stroke engine

    • E. Gutiérrez
    • D. Sala
    • J. Delpeuch

    Technical Paper Open access 25 April 2024 Article: 308

    

21. Application of a shunt damping circuit in a structure with an electromagnetically coupled beam: free vibration and frequency response

    • Willian Minnemann Kuhnert
    • Tarcísio M. P. Silva
    • Paulo J. Paupitz Gonçalves

    Technical Paper 25 April 2024 Article: 307

    

22. The effect of process parameters on the residual stress in friction surface cladding

    • K. Naserinejad
    • A. Masoumi
    • M. Mosavi Mashhadi

    Technical Paper 24 April 2024 Article: 306

    

23. Experimental investigation of drumet-cut twisted tape inserts on performance enhancement of heat exchanger tube in turbulent flow

    • Shivesh Kumar
    • Laljee Prasad

    Technical Paper 24 April 2024 Article: 305

    

24. Evaluation of the stresses on the knee meniscus tissue under various loading conditions and correlation with resulting meniscal tears observed clinically: a finite element study

    • Rajdeep Shankar Pawar
    • Sunil Kumar Yadav
    • Dinesh Kalyanasundaram

    Technical Paper 24 April 2024 Article: 304

    

25. Experimental investigation of a hybrid solar dryer for vegetable drying with and without phase change material

    • Debashree Debadatta Behera
    • Ramesh Chandra Mohanty
    • Ardhendu Mouli Mohanty

    Technical Paper 24 April 2024 Article: 303

    

26. Mitigating pressure fluctuations in a faulty axial piston pump using rearrangement of pistons

    • Rishabh Gupta
    • Neeraj Sonkar
    • Pavan Kumar Kankar

    Technical Paper 23 April 2024 Article: 302

    

27. A comprehensive review on CFD simulations of left ventricle hemodynamics: numerical methods, experimental validation techniques, and emerging trends

    • Priyanshu Soni
    • Sumit Kumar
    • Om Shankar

    Review Paper 22 April 2024 Article: 301

    

28. Effect of different internal impingement structures and cratered film cooling holes on overall cooling effectiveness

    • Yuhui Shen
    • Wenzhuang Wang
    • Chao Zhang

    Technical Paper 21 April 2024 Article: 300

    

29. Thermal and emission performance of CH₄ and H₂–CH₄ thermophotovoltaic micro-power generators

    • Hosein Faramarzpour

    Technical Paper 20 April 2024 Article: 299

    

30. Geometric modification of Billroth-II gastric resection with computational fluid dynamics (CFD) method: assessment of anastomotic leak and duodenogastric reflux risks

    • Yavuz Pirhan
    • Levent Uğur
    • Burak Kurşun

    Technical Paper 17 April 2024 Article: 298

    

31. Maskless electrochemical surface texturing for cylindrical components: new developments

    • Leonardo Conde Dias
    • Gabriel Guilherme Bacca Ferri
    • Henara Lillian Costa

    Technical Paper 17 April 2024 Article: 297

    

32. Design and optimization of clamp–shear–grab integrated attachment

    • Jing Zhao
    • Xudong Wang
    • Xin Wang

    Technical Paper 16 April 2024 Article: 296

    

33. Trajectory analysis of circulating tumor cells through contorted deterministic lateral displacement array for unruptured trapping: a simulation study

    • Rituraj Bhattacharjee
    • R. Kumar

    Technical Paper Open access 13 April 2024 Article: 295

    

34. Robust control scheme for electrohydraulic servo systems using extended sliding mode observer

    • Wanshun Zang
    • Gang Shen
    • Xiao Chen

    Technical Paper 12 April 2024 Article: 294

    

35. The Klann mechanism: kinematic analysis and force balancing

    • Jaime Gallardo-Alvarado

    Technical Paper 12 April 2024 Article: 293

    

36. Modeling and performance evaluation of mecanum wheel platform with reduced vibration and a robust path planning

    • Pankaj Singh Yadav
    • J. C. Mohanta
    • MD. Faiyaz Ahmed

    Technical Paper 11 April 2024 Article: 292

    

37. The study of the stacking sequence parameters on critical speed of hybrid composite rotor with experimental and numerical analysis

    • Mohammad Mahdi Nazari
    • Abbas Rahi
    • Roohollah Sarfaraz Khabbaz

    Technical Paper 11 April 2024 Article: 291

    

38. Vibration-based anomaly pattern mining for remaining useful life (RUL) prediction in bearings

    • Pooja Kamat
    • Satish Kumar
    • Rekha Sugandhi

    Technical Paper 10 April 2024 Article: 290

    

39. Turbulent flow across a clearing-forest transition: a large eddy simulation study

    • Luis Aramis dos Reis Pinheiro
    • Rafael Castilho Faria Mendes
    • Antonio Cesar Pinho Brasil Junior

    Technical Paper 09 April 2024 Article: 289

    

40. Numerical and experimental investigation of a cooling technique of a turbocharger radial turbine

    • Younes Ziad
    • Smail Khalfallah
    • Houssem Habbouche

    Technical Paper 08 April 2024 Article: 288

    

41. Feed optimization based on force modelling and TLBO algorithm in milling Al 7075

    • Ogutu Isaya Elly
    • Yin Yang

    Technical Paper Open access 08 April 2024 Article: 287

    

42. Structural design and characteristic analysis of three-oil port axial piston pump

    • Junpeng Feng
    • Jun Wang
    • Kongshuo Chu

    Technical Paper 07 April 2024 Article: 286

    

43. Investigation of the translaminar fracture behavior of the fiber-reinforced composites stitched perpendicular to their plane

    • Ahmet Murat Asan
    • Mete Onur Kaman
    • Kadir Turan

    Technical Paper 06 April 2024 Article: 285

    

44. An experimental study on the interaction effects between a rectangular supersonic jet and a flat wall at different wall lengths

    • T. V. S. Manikanta
    • B. T. N. Sridhar

    Technical Paper 06 April 2024 Article: 284

    

45. A high-performance computing applied to composition reservoir simulation using distributed memory and 3D hybrid unstructured grids

    • Ivens da Costa Menezes Lima
    • Anthonio Nunes Moreira-Netto
    • Francisco Marcondes

    Technical Paper 06 April 2024 Article: 283

    

46. Experimental and large-eddy simulation study of swirling air jet: Application for the improvement of the spatial temperature homogeneity

    • A. Bennia
    • M. A. Hameed Khan
    • H. Fellouah

    Review Paper 06 April 2024 Article: 282

    

47. A note on stress intensity factors evaluation by J-Integrals in the Dual Boundary Element Method

    • Beatriz Borges Faria Fonseca
    • Rodrigo Guerra Peixoto

    Technical Paper 06 April 2024 Article: 281

    

48. A two-dimensional boundary layer model for combustion chamber simulation

    • Erykson M. S. Costa
    • Marcio T. Mendonca
    • Cesar A. V. Salvador

    Technical Paper 05 April 2024 Article: 280

    

49. Evaluation of the helicoidal surface theory for the noise prediction of small UAS propellers

    • M. H. M. Martins
    • L. A. Bonomo
    • J. A. Cordioli

    Technical Paper 05 April 2024 Article: 279

    

50. Characterisation of the lightning strike damage mechanics onto composite materials and discussion on its numerical modelling techniques: review

    • Akshay Sontakkey
    • Mangesh Kotambkar
    • Kiran Kaware

    Review Paper 05 April 2024 Article: 278