1. Multi-objective optimization of 6-DOF deposition trajectories using NSGA-II

   • Juan C. Guacheta-Alba
   • Diego A. Nunez
   • Oscar F. Aviles

   Technical Paper 31 October 2023 Article: 610

   

2. Optimizing drilling parameters for minimizing delamination in polypropylene-date palm fiber bio-composite materials

   • Mahmoud M. A. Nassar
   • Khalid I. Alzebdeh
   • Sujan Piya

   Technical Paper 31 October 2023 Article: 609

   

3. Cylindricity error evaluation based on an improved artificial gorilla troop optimizer

   • Dong An
   • Chengbin Chang
   • Songhua Li

   Technical Paper 31 October 2023 Article: 608

   

4. Sound absorption performance of a labyrinthine metamaterial with arbitrary cross-sectional microperforations

   • Gildean do N. Almeida
   • Erasmo F. Vergara
   • Robson Z. Mikulski

   Technical Paper 30 October 2023 Article: 607

   

5. Examination of the theoretical model for flat-plate solar collectors and integration with solar radiation decomposition/transposition models

   • Leonardo Geovo
   • Crissiane A. Ancines
   • Andrés Z. Mendiburu

   Technical Paper 30 October 2023 Article: 606

   

6. Investigating ovality and wall-thinning behaviors in free-form bending of thin pipe bends with varying guider length and roller die diameter

   • P. Govindaraj
   • C. S. Arun

   Technical Paper 29 October 2023 Article: 605

   

7. Investigation on the tribological properties of different coatings of cutting tool with reciprocating friction test

   • Donghui Li
   • Tao Zhang
   • Guohe Li

   Technical Paper 29 October 2023 Article: 604

   

8. Effects of annular chamber on load and interior ballistic stabilization in gas ejection

   • Xiaolei Hu
   • Jiayi Guo

   Technical Paper 28 October 2023 Article: 603

   

9. Multi-stage mechanical behavior and damage mechanism of composite interference-fit joints subject to long-term low-temperature aging

   • Jian Li
   • Wei Guo
   • Yibiao Fan

   Technical Paper 27 October 2023 Article: 602

   

10. Evaluation of the application value of different parameter optimization methods in electrochemical machining from micro-morphology investigations

    • ManFu Wang
    • SiFan Wang
    • GuiBing Pang

    Technical Paper 26 October 2023 Article: 601

    

11. A novel multi-fidelity neural network for response prediction using rotor dynamics and model reduction

    • Debanshu S. Khamari
    • Suraj K. Behera

    Technical Paper 25 October 2023 Article: 600

    

12. Experimental and numerical investigation on rock breaking of conical pick assisted by abrasive water jet gridding pre-cutting method

    • Xin Zhou
    • Chuwen Guo
    • Fengchao Wang

    Technical Paper 25 October 2023 Article: 599

    

13. A new algorithm for obstacle avoidance and tracing applied to wall painting robots

    • Xian-Ming Liu

    Technical Paper 24 October 2023 Article: 598

    

14. Evaluation of the steady-state performance characteristics of a two-layered porous journal bearing under turbulent regimes

    • Subrata Barman
    • Sisir Kumar Guha
    • Shitendu Some

    Technical Paper 24 October 2023 Article: 597

    

15. Effect of tungsten carbide reinforcement phase on the abrasive wear performance of metal matrix composites deposited by laser cladding

    • Renato Camponogara Panziera
    • Milton Pereira
    • Flavio Guedin Neto

    Technical Paper 23 October 2023 Article: 596

    

16. Finite element modelling of transmission of TBL-induced vibrational energy through a stiffened double panel using CFD sensitivity study

    • Biplab Ranjan Adhikary
    • Ananya Majumdar
    • Partha Bhattacharya

    Technical Paper 20 October 2023 Article: 595

    

17. Optimal power split control strategy for plug-in biofuel-electric hybrid vehicle using improvised adaptive ECMS control algorithm

    • R. Vignesh
    • A. Harikrishnan
    • Rajan Malewar

    Technical Paper 20 October 2023 Article: 594

    

18. Modeling and optimization of steel end milling process: a review on empirical studies

    • Nathan Bezerra de Oliveira
    • Rogerio Santana Peruchi
    • Tarcisio Gonçalves de Brito

    Review 20 October 2023 Article: 593

    

19. Effect of straightness tolerance on unbalanced response of flexible shaft passing through critical speed

    • S. M. R. Mousavi
    • R. D. Firouz-Abadi
    • M. Roknabadi

    Technical Paper 19 October 2023 Article: 592

    

20. The time-mean aerodynamic force characteristics of two square cylinders arranged inline

    • Xiaobing Liu
    • Huimin Jiang
    • Qun Yang

    Technical Paper 19 October 2023 Article: 591

    

21. Dynamic response of embedded Timoshenko CNTs exposed to magnetic and thermal fields subjected to moving load based on doublet mechanics

    • Ramazan Özmen
    • Ismail Esen

    Technical Paper 18 October 2023 Article: 590

    

22. 1D-SCRN: a novel approach for industrial machinery performance degradation trend prediction

    • Gangjin Huang
    • Hongkun Li
    • Yuanliang Zhang

    Technical Paper 17 October 2023 Article: 589

    

23. Two-phase slug flow control using baffle in a vessel-type slug catcher: a CFD simulation study

    • Morteza Rezvandehi
    • Mohammad Reza Ansari
    • Hesam Moayedi

    Technical Paper 17 October 2023 Article: 588

    

24. Enhancing the machinability of Inconel 625 milling using cryogen and blend of biodegradable oils and application of advanced algorithms

    • Yogesh V. Deshpande
    • Siddhant Binani
    • P. S. Barve

    Technical Paper 17 October 2023 Article: 587

    

25. Laplace transform solution of the time-dependent annular Couette flow with dynamic wall slip

    • Ahmed E. K. Ali
    • A. F. Ghaleb
    • M. A. Helal

    Technical Paper Open access 17 October 2023 Article: 586

    

26. Investigating fracture behavior and energy absorption of flexible hybrid biocomposites with soft–hard rubber/biofiller layers and fabric impregnated with matrix under high-velocity impact

    • Ahmad Ghiaskar
    • Mohammad Damghani Nouri

    Technical Paper 16 October 2023 Article: 585

    

27. Group normalization-based 2D-convolutional neural network for intelligent bearing fault diagnosis

    • D. Gilbert Chandra
    • U. Srinivasulu Reddy
    • M. Umapathy

    Technical Paper 15 October 2023 Article: 584

    

28. Novel electrode for thermal additive centrifugal force-assisted abrasive flow machining

    • Anant Bhardwaj
    • Krovvidi Srinivas
    • Rajiv Chaudhary

    Technical Paper 14 October 2023 Article: 583

    

29. Study of radiation modelling impact on the extinction limits of methane diffusion flames diluted with N₂ and CO₂

    • Fredherico Rodrigues
    • Cristian Hoerlle
    • Fernando Pereira

    Technical Paper 14 October 2023 Article: 582

    

30. Performance prediction of different BCC lattice structures under static loading: an experimental approach

    • Sakshi Kokil-Shah
    • Anirban Sur
    • Sanjay K. Darvekar

    Technical Paper 13 October 2023 Article: 581

    

31. Rock-breaking performance and experimental study of split bit

    • Jialin Tian
    • Yuhang Wu
    • Zhe Deng

    Review 12 October 2023 Article: 580

    

32. Tribo-behavior of a spiral-grooved annular pocket hybrid tilted thrust pad bearing

    • Narendra Kumar
    • Satish C. Sharma

    Technical Paper 11 October 2023 Article: 579

    

33. Modeling the flutter phenomenon by CFD of rectangular profiles

    • Juliema Fronczak
    • Alexandre Miguel Silva Araújo
    • Patricia Habib Hallak

    Technical Paper 11 October 2023 Article: 578

    

34. Analyses of energy loss characteristics of a low-specific speed centrifugal pump as turbines (PATs) based on entropy generation analysis model

    • Tong Lin
    • Jianrong Zhang
    • Zuchao Zhu

    Technical Paper 11 October 2023 Article: 577

    

35. Improved signal processing for bearing fault diagnosis in noisy environments using signal denoising, time–frequency transform, and deep learning

    • Hind Hamdaoui
    • Looh Augustine Ngiejungbwen
    • Shixi Tang

    Technical Paper 09 October 2023 Article: 576

    

36. Fuzzy fractional-order adaptive robust feedback linearization control optimized by the multi-objective artificial hummingbird algorithm for a nonlinear ball–wheel system

    • S. Moghtader Arbatsofla
    • A. H. Mazinan
    • M. A. Nekoui

    Technical Paper 09 October 2023 Article: 575

    

37. Study on airflow and particle transport in In silico human respiratory tract

    • Bholu Kumar
    • Digamber Singh

    Technical Paper 09 October 2023 Article: 574

    

38. Effect of the air flows ratio on energy behavior and NO_x emissions from a top-lit updraft biomass cookstove

    • Duvan F. Muñoz
    • Jonatan Gutiérrez
    • Juan F. Pérez

    Technical Paper Open access 09 October 2023 Article: 573

    

39. Two-way fluid–structure interaction for longitudinal vibration of a loaded elastic rod within a multiphase fluid flow

    • Mehrnoosh Tarmigh
    • Morteza Behbahani-Nejad
    • Ebrahim Hajidavalloo

    Technical Paper 08 October 2023 Article: 572

    

40. Insight into the dynamic mixing of droplets and plugs in droplet micro-mixer with Cantor fractal structure

    • Qing Yu
    • Xueye Chen

    Technical Paper 08 October 2023 Article: 571

    

41. Effects of body-armor-like grinding wheel parameters on surface quality and material removal rate in high-shear and low-pressure grinding process

    • Bing Liu
    • Yebing Tian
    • Zhiqiang Gu

    Technical Paper 08 October 2023 Article: 570

    

42. Analysis of thermal comfort in a planetarium through CFD simulations

    • André Patrocinio de Castro
    • Manoel Antonio da Fonseca Costa Filho
    • Washington Batista de Lima

    Technical Paper 07 October 2023 Article: 569

    

43. Evaluation of physics-informed neural networks (PINN) in the solution of the Reynolds equation

    • Douglas Jhon Ramos
    • Barbara Zaparoli Cunha
    • Gregory Bregion Daniel

    Technical Paper 07 October 2023 Article: 568

    

44. Assessment of Johnson-Cook material constitutive parameters in finite element simulation of machining Al–SiC metal matrix composite

    • K. Gobivel
    • K. S. Vijaysekar

    Technical Paper 06 October 2023 Article: 567

    

45. Assessment of RANS-type turbulence models for CFD simulations of horizontal axis wind turbines at moderate Reynolds numbers

    • Daniel Garcia-Ribeiro
    • Vinícius Malatesta
    • Hernán D. Cerón-Muñoz

    Technical Paper 06 October 2023 Article: 566

    

46. Aerodynamic performance improvement of the centrifugal compressor employing the elastic deformation theory

    • Junbing Liu
    • Xiaoqiang Fan

    Technical Paper 06 October 2023 Article: 565

    

47. Trajectory optimization of the Brazilian multistage launch vehicle VLM-1

    • Guilherme da Silveira
    • Sandro da Silva Fernandes

    Technical Paper 06 October 2023 Article: 564

    

48. Design and research on virtual prototype of electro-hydraulic vibration cylinder controlled by closed-loop digital piston pump

    • Kaiping Zhao
    • Tao He
    • Gang Luo

    Technical Paper 05 October 2023 Article: 563

    

49. Compressive response and energy absorption of foam-filled aluminum honeycomb composite: experiments and simulation

    • Mohammad Fathi
    • Mahmood Sameezadeh
    • Majid Vaseghi

    Technical Paper 05 October 2023 Article: 562

    

50. A damage index proposal for shear-after-impact of laminated composite plates

    • Gabriel Sales Candido Souza
    • Marcelo Leite Ribeiro
    • Volnei Tita

    Technical Paper 04 October 2023 Article: 561