1. Frequency analysis and shock response studies in bidirectional functionally graded microbeam with thermal effects

   • Uttam Kumar Kar
   • J. Srinivas

   Technical Paper 02 July 2022 Article: 311

   

2. Thermo-hydrodynamic analysis of multistep texture effect on the performance of journal bearings through acoustic and tribological characteristics

   • M. Muchammad
   • M. Tauviqirrahman
   • J. Jamari

   Technical Paper 01 July 2022 Article: 310

   

3. An analysis of the surface roughness of Ti–15Mo alloy machined with uncoated cemented tungsten carbide cutting inserts with different geometries

   • D. Paris
   • J. C. C. Rubio
   • C. E. H. Ventura

   Technical Paper 01 July 2022 Article: 309

   

4. Prediction of single crystal instability in channel-die compression using Rice's criterion

   • Khalid Zhani
   • Michel Darrieulat
   • Ahmed Chenaoui

   Review 30 June 2022 Article: 308

   

5. Parameter optimization in the friction stir welding of polycarbonate using cylindrical and conical tool pins

   • Leonardo Viana Dias
   • Aderci de Freitas Filho
   • Cláudio Turani Vaz

   Technical Paper 30 June 2022 Article: 307

   

6. Study of bolt loosening under vibration conditions considering high-temperature creep

   • Liange He
   • Zhou Yuan
   • Tianhua Li

   Technical Paper 29 June 2022 Article: 306

   

7. Numerical analysis on the effect of blade roughness on cavitating flow characteristics in centrifugal pumps

   • Basel Al Bishtawi
   • Gianfranco Scribano
   • Manh-Vu Tran

   Technical Paper 28 June 2022 Article: 305

   

8. A dynamic modelling method for an electro-hydraulic proportional valve combining multi-systems and moving meshes

   • Xian-ju Yuan
   • Hong-tao Ling
   • Ri-cheng Zhao

   Technical Paper 27 June 2022 Article: 304

   

9. FRF prediction modeling and joint parameter identification of motorized spindle-tool handle

   • Wei Luo
   • Bo Lu
   • Yixuan Song

   Technical Paper 27 June 2022 Article: 303

   

10. Physical system analysis related to observability, controllability and stability using its equations of generalized motion and canonical equations both in dissipative forms

    • Cem Civelek
    • Roland Süsse

    Technical Paper 27 June 2022 Article: 302

    

11. Influence of cutting force on temperature, microcracks and chip morphology during rotary ultrasonic bone drilling: An in-vitro study

    • Raj Agarwal
    • Ravinder Pal Singh
    • Jaskaran Singh

    Technical Paper 26 June 2022 Article: 301

    

12. Experimental and numerical investigation of flexural behavior of non-uniform thin-walled beams under three-point loading

    • S. Chahardoli

    Technical Paper 26 June 2022 Article: 300

    

13. Intramedullary pin fixation in 3D printed canine femur bone model for preoperative surgical planning

    • Rupinder Singh
    • Abhishek Kumar
    • Kamaljit Singh Boparai

    Technical Paper 25 June 2022 Article: 299

    

14. Influencing the residual stresses in tubes drawn with a floating plug by changing tool parameters

    • Jabbar Gattmah
    • Fahrettin Ozturk
    • Sadettin Orhan

    Technical Paper 25 June 2022 Article: 298

    

15. Experimental thermodynamic analysis of automotive turbochargers using fluid film bearings with different groove shapes

    • Luiz Henrique Jorge Machado
    • Oscar R. Sandoval
    • Marco Tulio C. Faria

    Technical Paper 25 June 2022 Article: 297

    

16. Taylor bubble flow distribution in multi cross-branched microchannels: a numerical investigation

    • Aswin Jagadeesh Ammanath
    • Sangram Kumar Samal
    • Manoj Kumar Moharana

    Technical Paper 24 June 2022 Article: 296

    

17. Simulation analysis on mechanical properties of water-lubricated damping bearing of underwater vehicle

    • Ting Liu
    • Zhenglin Liu

    Technical Paper 24 June 2022 Article: 295

    

18. Local averaged stratified sampling method

    • Fernando Valentini
    • Olavo M. Silva
    • Eduardo Lenz Cardoso

    Technical Paper 23 June 2022 Article: 294

    

19. A low-cost methodology for quality inspection of metal additive manufactured parts

    • Daniel de Moraes Coelho
    • Luiz Eduardo dos Santos Paes
    • Louriel Oliveira Vilarinho

    Technical Paper 23 June 2022 Article: 293

    

20. Study on the influence of operational conditions on weld bead morphology produced through TIG process with longitudinal wire oscillation

    • Tiago Vieira da Cunha
    • Felipe José dos Santos
    • Anna Louise Voigt

    Technical Paper 23 June 2022 Article: 292

    

21. Design considerations and stress analysis of helical gear drives with unequal and offset face widths

    • Alfonso Fuentes-Aznar
    • Zhen Chen

    Technical Paper 22 June 2022 Article: 291

    

22. Residual stresses in weld bead of low carbon steel plates welded by GMAW using L_CR waves

    • Igor Felipe Grzybowski
    • Renan Rakoski Zientarski
    • Auteliano Antunes dos Santos Junior

    Technical Paper 22 June 2022 Article: 290

    

23. Study of the dynamic performance of rolling non-pneumatic tires using finite element method

    • Huiyun Li
    • Haichao Zhou
    • Ting Xu

    Technical Paper 22 June 2022 Article: 289

    

24. Adaptive velocity region-based path planning system for autonomous vehicle under multiple obstacles with various velocities

    • Zhixian Liu
    • Xiaofang Yuan

    Technical Paper 21 June 2022 Article: 288

    

25. Sintered silicon carbide grinding surface roughness prediction based on deep learning and neural network

    • Jie Yang
    • Liqiang Zhang
    • Long Qian

    Technical Paper 21 June 2022 Article: 287

    

26. Influence of the single-screw extruder nozzle diameter on pellet-based filaments for additive manufacturing

    • Leone Bertozo Silva
    • Renan Oscar de Oliveira
    • Kun Fu

    Technical Paper 20 June 2022 Article: 286

    

27. Shape effects on airfoils induced by riveting

    • José Augusto Nunes Figueira
    • Luís Gonzaga Trabasso
    • Paulo Afonso de Oliveira Soviero

    Technical Paper 20 June 2022 Article: 285

    

28. Finite element modeling for biomechanical validation of three-dimensional digital surgical planning in periacetabular osteotomy

    • Marcus V. S. Ferraz
    • Flávia S. Bastos
    • Sara D. Vecchio

    Technical Paper 18 June 2022 Article: 284

    

29. Progressive damage analysis of functionally graded dental implants due to pre-tightening loads using extended finite element method

    • Ali Mohammadi Anari
    • Ehsan Selahi

    Technical Paper 18 June 2022 Article: 283

    

30. Research on rotational speed affecting the expansion performance of wave rotor

    • Peiqi Liu
    • Mingyu Feng
    • Dapeng Hu

    Technical Paper 17 June 2022 Article: 282

    

31. Deep drawing of a thin hemispherical cup using a novel die without a blank holder: experimental and numerical investigations

    • Ehsan Akafzadeh
    • Mehdi Salmani-Tehrani
    • Mehrdad Shayan

    Technical Paper 17 June 2022 Article: 281

    

32. DEM simulation of the transport of mine concrete by a screw feeder

    • Lianjun Chen
    • Zhenjiao Sun
    • Gang Pan

    Technical Paper 17 June 2022 Article: 280

    

33. Anti-cavitation leading-edge profile design of centrifugal pump impeller blade based on genetic algorithm and decision tree

    • Fangfang Zhang
    • Ran Tao
    • Ruofu Xiao

    Technical Paper 15 June 2022 Article: 279

    

34. Strategy of smooth motion planning of multi-axes space manipulator avoiding dynamic singularity in Cartesian space

    • Abhishek Shrivastava
    • Vijay Kumar Dalla

    Technical Paper 14 June 2022 Article: 278

    

35. An improvement on the Florence analytical equation for predicting the ballistic limit velocity of ceramic–aluminum targets and its development to ceramic–aluminum–polyurea panels

    • S. Jafari
    • A. Alavi Nia

    Technical Paper 13 June 2022 Article: 277

    

36. Semi-supervised multitask deep convolutional generative adversarial network for unbalanced fault diagnosis of rolling bearing

    • Changchang Che
    • Huawei Wang
    • Xiaomei Ni

    Technical Paper 10 June 2022 Article: 276

    

37. Developing the viscoelastic model and model-based fuzzy controller for the MRE isolator for the wide frequency range vibration isolation

    • Katari Kiran
    • Umanath R. Poojary
    • K. V. Gangadharan

    Technical Paper Open access 10 June 2022 Article: 275

    

38. Experimental and numerical investigation of the vibro-acoustic behavior of fiber metal laminate

    • Arul Raj Vaiduriyam
    • Lenin Babu Mailan Chinnapandi

    Technical Paper 09 June 2022 Article: 274

    

39. Multi-objective optimization strategy for plastic forming parameters of variable wall thickness special-shaped plate members

    • Ya Cui
    • Wenlong Xu
    • Hongyuan Hao

    Technical Paper 09 June 2022 Article: 273

    

40. Analysis of high frequency and transient characteristics of the flow past a circular cylinder

    • Lei Sun
    • Yong Huang
    • Xiaobo Guo

    Technical Paper 08 June 2022 Article: 272

    

41. Equation of the cross-sectional profile of a groove produced by helical milling with a ball-end mill

    • Ahmet Dogrusadik

    Technical Paper 08 June 2022 Article: 271

    

42. Effects on machinability of cryogenic treatment applied to carbide tools in the milling of Ti6AI4V with optimization via the Taguchi method and grey relational analysis

    • Ergün EKİCİ
    • Gültekin UZUN

    Technical Paper 08 June 2022 Article: 270

    

43. The Wtfergram: an effective approach for selecting the optimal demodulation band based on the maximum weighted time–frequency energy ratio

    • Baoyu Huang
    • Yongxiang Zhang
    • Hao Chen

    Technical Paper 08 June 2022 Article: 269

    

44. Erosion model for abrasive water jet machining of composite materials

    • Ajit Dhanawade
    • Seema Wazarkar
    • Shailendra Kumar

    Technical Paper 06 June 2022 Article: 268

    

45. Experimental investigation and finite element modeling for improved shearing cutting performance using optimized bio-inspired shearing tool

    • Huixin Wang
    • Yunhai Ma
    • Qinghua Wang

    Technical Paper 06 June 2022 Article: 267

    

46. Study on energy absorption characteristics of aluminum foam composite anti-collision rod

    • Chenghu Guo
    • Jun Mao
    • Miao Xie

    Review 06 June 2022 Article: 266

    

47. Effect of wood filler on the mechanical and thermal behavior of polypropylene/short glass/short carbon fiber-reinforced hybrid composites

    • H. V. Divya
    • T. P. Jeevan
    • B. M. Rudresh

    Technical Paper 06 June 2022 Article: 265

    

48. Experimental and CFD-based study of the interaction of lobed multi-jet diffusers in unbalanced positions

    • Mohamed Braikia
    • Hassan Naji
    • Abderrezzaq Maammar

    Technical Paper 06 June 2022 Article: 264

    

49. Study on the numerical simulation of the sheet bulging compared by rubber and variable performance elastomer

    • Rui Zhang
    • Zhong-jin Wang

    Technical Paper 06 June 2022 Article: 263

    

50. Remaining useful life prognostics based on stochastic degradation modeling: turbofan engine as case study

    • Zahra Esfahani
    • Karim Salahshoor
    • Amir Hooshang Mazinan

    Technical Paper 04 June 2022 Article: 262