1. A study of the domed drawing displacement characteristics of a high-tension steel plate (SGAFC980)

   • Chun-Kyu Lee
   • Min Lee
   • Jae-Woong Yun

   Technical Paper 03 November 2021 Article: 520

   

2. Process damping model approach in milling operations

   • Sezan Orak
   • Erol Turkes
   • Sencer S. Karabeyoglu

   Technical Paper 01 November 2021 Article: 519

   

3. Application of H&S and UFS models for a parametric analysis of the exergoeconomic variables of an organic Rankine cycle-vapor-compression refrigeration system

   • Atilio B. Lourenço

   Technical Paper 01 November 2021 Article: 518

   

4. A critical plane criterion to multiaxial fatigue of metals containing small defects

   • F. C. Castro
   • E. N. Mamiya
   • C. Bemfica

   Technical Paper 01 November 2021 Article: 517

   

5. Numerical investigation of the effects of vortex generators on the Bell A821201 airfoil

   • Hao Chen

   Technical Paper 29 October 2021 Article: 516

   

6. Divergence and flutter instability of bending–torsional columns under different boundary conditions

   • Abdolreza Askarian

   Technical Paper 29 October 2021 Article: 515

   

7. The machined performance and recast layer properties of AISI H13 steel processed by powder mixed EDM process: an investigation and comparison in fine-finishing and semi-finishing processes

   • Van Tao Le

   Technical Paper 28 October 2021 Article: 514

   

8. Performance evaluation of standard second-order finite volume method for DNS solution of turbulent channel flow

   • Victor W. F. de Azevedo
   • Fabian Denner
   • Emilio E. Paladino

   Technical Paper 28 October 2021 Article: 513

   

9. The effect of thixotropy on dam-break flow: a numerical study by smoothed particle hydrodynamics

   • M. Vahabi

   Technical Paper 27 October 2021 Article: 512

   

10. Comparison between the machinability of different titanium alloys (Ti–6Al–4V and Ti–6Al–7Nb) employing the multi-objective optimization

    • Amanda Oliveira Mello
    • Robson Bruno Dutra Pereira
    • J. Paulo Davim

    Technical Paper 26 October 2021 Article: 511

    

11. Modelling of the flexoelectric effect on rotating nanobeams with geometrical imperfection

    • Nguyen Chi Tho
    • Nguyen Truong Thanh
    • Le Kha Hoa

    Technical Paper 23 October 2021 Article: 510

    

12. Moving boundary problem of ablation in a carbon-phenolic composite using finite element method

    • Carlos Eduardo Grossi Campos
    • Humberto Araujo Machado

    Review 23 October 2021 Article: 509

    

13. Numerical study of coupled flow in blocking pulsed jet impinging on a rotating wall

    • Li Zhang
    • Chuan Wang
    • Weidong Shi

    Technical Paper 22 October 2021 Article: 508

    

14. Reducing micro-sparks using reusable and low-cost pencil graphite cathode in electrochemical micromachining of SS304

    • Pradeep Natarajan
    • Shanmuga Sundaram Karibeeran
    • Pradeep Kumar Murugesan

    Technical Paper 21 October 2021 Article: 507

    

15. Correction to: Experimental investigation for fine finishing of the tapered mould cavity using a newly developed GWMRF process

    • Ankit Aggarwal
    • Anant Kumar Singh

    Correction 21 October 2021 Article: 506

    

16. Effect of the test conditions on tribological behavior of an Nb-stabilized AISI 430 stainless steel sheet

    • Valmir Dias Luiz
    • Paulo César de Matos Rodrigues

    Technical Paper 21 October 2021 Article: 505

    

17. A simplified model for fluid–structure interaction: a cylinder tethered by springs in a lid-driven cavity flow

    • Jonatas Emmanuel Borges
    • Marcos Antonio de Souza Lourenço
    • Christopher Micallef

    Technical Paper 18 October 2021 Article: 504

    

18. Exploring a locus of maximum metal transfer stability of the short-circuiting GMAW process based on the reignition voltage peaks

    • Guilherme Rezende Bessa Ferreira
    • Roberto Malheiros Moreira Filho
    • Moisés Luiz Lagares Jr.

    Technical Paper 17 October 2021 Article: 503

    

19. Numerical simulations and experiments of gas–liquid two-phase flow in an inducer

    • Baoling Cui
    • Yifan Li
    • Pei Wang

    Technical Paper 17 October 2021 Article: 502

    

20. The optimal aspect ratio of the T-shaped rectangular microchannel mixer to achieve excellent mixing and hydraulic comprehensive performance

    • Xuekuan Zhan
    • Dalei Jing

    Technical Paper 16 October 2021 Article: 501

    

21. The effect of environment pressure in carbon–phenolic composite ablation

    • Pedro Guilherme Silva Pesci
    • Homero de Paula e Silva
    • Humberto Araujo Machado

    Technical Paper 16 October 2021 Article: 500

    

22. A methodology to estimate the remaining residual life of components of processes subjected to corrosion using the extreme value theory combined with the first-order reliability method

    • I. P. Lemos
    • A. M. G. de Lima
    • W. C. D. Silva

    Technical Paper 15 October 2021 Article: 499

    

23. Static pressure behavior of gas–liquid flows along a Venturi

    • M. G. Costa
    • J. M. Leite
    • J. L. G. Oliveira

    Technical Paper 15 October 2021 Article: 498

    

24. The effect of heterogeneous surface charges on mixing in a combined electroosmotic/pressure-driven micromixer

    • A. Farahinia
    • J. Jamaati
    • Wenjun Zhang

    Technical Paper 13 October 2021 Article: 497

    

25. Numerical study for the influences of nozzle exit position, mixing, and diffuser section lengths on performance of CRMC ejector

    • S. K. Yadav
    • K. M. Pandey
    • V. Kumar

    Technical Paper 13 October 2021 Article: 496

    

26. Asset management strategies using reliability, availability, and maintainability (RAM) analysis

    • Maria Valentina Clavijo Mesa
    • Carmen Elena Patino-Rodriguez
    • Enrique López Droguett

    Technical Paper 12 October 2021 Article: 495

    

27. An intelligent hexapod robot for inspection of airframe components oriented by deep learning technique

    • Kelen C. Teixeira Vivaldini
    • Gustavo Franco Barbosa
    • David A. Guerra-Zubiaga

    Technical Paper 11 October 2021 Article: 494

    

28. Thermodynamical model of an atmospheric steam engine

    • Vítor Augusto Andreghetto Bortolin
    • Bernardo Luiz Harry Diniz Lemos
    • Julio Romano Meneghini

    Technical Paper 11 October 2021 Article: 493

    

29. Oscillation characterisation of downwardly propagating C₃H₈–air flame in a tube

    • C. E. Ebieto
    • O. E. Nyong
    • R. Woolley

    Technical Paper 11 October 2021 Article: 492

    

30. Threaded pin effects analysis on forces in FSW

    • Karen J. Quintana
    • Jose Luis L. Silveira

    Technical Paper 11 October 2021 Article: 491

    

31. Mode II fracture energy of laminated composites enhanced with micro-cork particles

    • A. Akhavan-Safar
    • M. Salamat-Talab
    • L. F. M. da Silva

    Technical Paper 10 October 2021 Article: 490

    

32. Pump-as-turbine for energy recovery in municipal water supply networks. A review

    • Davi Edson Sales e Souza
    • André Luiz Amarante Mesquita
    • Claudio José Cavalcante Blanco

    Review 10 October 2021 Article: 489

    

33. ReGear: an upper and lower limb simultaneous system for stroke rehabilitation

    • Lucas Antônio Oliveira Rodrigues
    • Vinicius Pompeu Moraes
    • Rogério Sales Gonçalves

    Technical Paper 09 October 2021 Article: 488

    

34. Stability assessment of L75 lox-ethanol rocket engine

    • Rogério Pirk
    • Carlos d’A. Souto
    • Günter Langel

    Technical Paper 09 October 2021 Article: 487

    

35. The influence and a direct judgement method of the flow state in supercritical CO₂ dry gas seal

    • Cong Zhang
    • Jin-bo Jiang
    • Ji-yun Li

    Technical Paper 09 October 2021 Article: 486

    

36. Failure mode prediction of resistance spot welded quenching and partitioning stainless steel

    • Taher Chebbi
    • Brahim Tlili
    • Moez Chafra

    Review Paper 08 October 2021 Article: 485

    

37. Phase-field modelling of size effect on strength and structural brittleness

    • Hugo Mouro Leão
    • Roque Luiz da Silva Pitangueira
    • Samuel Silva Penna

    Technical Paper 08 October 2021 Article: 484

    

38. Design for assistive technology oriented to design methodology: a systematic review on user-centered design and 3D printing approaches

    • A. V. F. Santos
    • Z. C. Silveira

    Review 05 October 2021 Article: 483

    

39. Evaluating the reliability of two mathematical models of the pneumatic suspension via two various theoretical approaches

    • Renqiang Jiao
    • Vanliem Nguyen
    • Vanquynh Le

    Technical Paper 04 October 2021 Article: 482

    

40. Investigation of nonlinear dynamic behavior of micro-beam reinforced with CNT containing SMA micro-wires considering size effect

    • Mohammad Reza Aghababaiyan
    • Mohsen Botshekanan Dehkordi
    • Ahmad Fallah

    Technical Paper 04 October 2021 Article: 481

    

41. The effect of surface integrity on contact performance of carburized gear

    • Shali Cheng
    • Ye Zhou
    • Houbin Feng

    Technical Paper 04 October 2021 Article: 480

    

42. Diffusive terms applied in smoothed particle hydrodynamics simulations of incompressible and isothermal Newtonian fluid flows

    • Carlos Alberto Dutra Fraga Filho
    • Fábio Pavan Piccoli

    Technical Paper 04 October 2021 Article: 479

    

43. Process performance optimization of μEDM aided with ultrasonic vibration and magnetic force

    • Gurpreet Singh
    • D. R. Prajapati

    Technical Paper 02 October 2021 Article: 478

    

44. Development of a new correction method based on the \({\varvec{\lambda}}\)-fraction method and Dafalias–Popov’s cyclic plasticity

    • Rahmatollah Ghajar
    • Farzin Tavakkoli

    Technical Paper 02 October 2021 Article: 477

    

45. Investigation of static and fatigue behavior of honeycomb sandwich structure: a computational approach

    • Amit Amulani
    • Hemant Pratap
    • Benedict Thomas

    Technical Paper 02 October 2021 Article: 476

    

46. A new data normalization approach applied to the electromechanical impedance method using adaptive neuro-fuzzy inference system

    • Fernando Augusto Freitas
    • Rosana Motta Jafelice
    • Julio Endress Ramos

    Technical Paper 02 October 2021 Article: 475