1. Synthesis of TiN and TiO₂ thin films by cathodic cage plasma deposition: a brief review

   • L. H. P. Abreu
   • M. Naeem
   • Javed Iqbal

   Review 03 September 2020 Article: 496

   

2. Nano-oscillators based on a C₆₀ fullerene inside open carbon nanocones: a molecular dynamics study

   • S. Ajori
   • F. Sadeghi
   • R. Ansari

   Technical Paper 03 September 2020 Article: 495

   

3. Study of effects of ignition improvers on ethanol compression ignition in the rapid compression machine

   • Fernando Zegarra Sánchez
   • Ana Rosa Fonseca de Aguiar Martins
   • Renata Nohra Chaar Pradelle

   Technical Paper 02 September 2020 Article: 494

   

4. Multi-fidelity crashworthiness optimization of a bus bumper system under frontal impact

   • Erdem Acar
   • Burak Yilmaz
   • Murat Altin

   Technical Paper 31 August 2020 Article: 493

   

5. Numerical simulation of the ferro-nanofluid flow in a porous ribbed microchannel heat sink: investigation of the first and second laws of thermodynamics with single-phase and two-phase approaches

   • Quyen Nguyen
   • Shahab Naghdi Sedeh
   • Arash Karimipour

   Technical Paper 28 August 2020 Article: 492

   

6. Comparison of the convergence rates between Fourier pseudo-spectral and finite volume method using Taylor-Green vortex problem

   • A. A. Nascimento
   • F. P. Mariano
   • A. Silveira-Neto

   Technical Paper 25 August 2020 Article: 491

   

7. Anisotropic water diffusion in mechanical joints of fiber-reinforced composite panels: numerical study

   • Edmunds Zīle
   • Andrey Aniskevich
   • Daiva Zeleniakiene

   Technical Paper 25 August 2020 Article: 490

   

8. Deformation characteristics of adaptive hydrostatic thrust bearing under extreme working conditions

   • Xiaodong Yu
   • Fakun Wang
   • Junfeng Wang

   Technical Paper 24 August 2020 Article: 489

   

9. Damped vibration analysis of cracked Timoshenko beams with restrained end conditions

   • Yasar Pala
   • Semih Beycimen
   • Caglar Kahya

   Technical Paper 24 August 2020 Article: 488

   

10. Investigation of MEMS as accelerometer sensor in an Implantable Centrifugal Blood Pump prototype

    • S. Silva Neto
    • J. R. C. Sousa Sobrinho
    • M. A. Souza

    Technical Paper 24 August 2020 Article: 487

    

11. Design sensitivity and optimization of powertrain mount system design parameters for rigid body modes and kinetic energy distributions

    • Polat Şendur
    • Birkan Tunç

    Technical Paper 24 August 2020 Article: 486

    

12. Impact of twisting tapes with various pitch lengths on the exergy and entropy performances of line heaters

    • Ali Sulaiman Alsagri

    Technical Paper 20 August 2020 Article: 485

    

13. Performance analysis of light shelves in providing visual and thermal comfort and energy savings in residential buildings

    • Amir Ebrahimi-Moghadam
    • Paria Ildarabadi
    • Faramarz Fadaee

    Technical Paper 20 August 2020 Article: 484

    

14. Numerical analysis of aluminum alloy fused coating process

    • Guangxi Zhao
    • Jun Du
    • Ruwei Geng

    Technical Paper 19 August 2020 Article: 483

    

15. Numerical study of flow boiling flow patterns and pressure drop of R134a in small tubes under high flight acceleration

    • Yu Xu
    • Zihang Zhu
    • Xinyue Xiong

    Technical Paper 19 August 2020 Article: 482

    

16. Hybrid fused filament fabrication for manufacturing of Al microfilm reinforced PLA structures

    • Ranvijay Kumar
    • Jasgurpreet Singh Chohan
    • Narinder Singh

    Technical Paper 19 August 2020 Article: 481

    

17. A study on wire and arc additive manufacturing of low-carbon steel components: process stability, microstructural and mechanical properties

    • Van Thao Le
    • Dinh Si Mai
    • Quang Huy Hoang

    Technical Paper 19 August 2020 Article: 480

    

18. A new Wasserstein distance- and cumulative sum-dependent health indicator and its application in prediction of remaining useful life of bearing

    • Jiancheng Yin
    • Minqiang Xu
    • Yuantao Yang

    Technical Paper 18 August 2020 Article: 479

    

19. Data-driven identification of rotating machines using ARMA deterministic parameter evolution in the angle/time domain

    • Andreyson Bicudo Jambersi
    • Samuel da Silva
    • Jérôme Antoni

    Technical Paper 17 August 2020 Article: 478

    

20. Multi-objective optimization of a 2-stage spur gearbox using NSGA-II and decision-making methods

    • Edmund S. Maputi
    • Rajesh Arora

    Technical Paper 17 August 2020 Article: 477

    

21. \({\mathscr {H}}\)-matrix acoustics BEM for vocal tract configuration optimization using genetic algorithms

    • Álvaro Campos Ferreira
    • Gino Bertollucci Colherinhas
    • Marcus Vinicius Girão de Morais

    Technical Paper 17 August 2020 Article: 476

    

22. Estimating Lyapunov spectrum on shape-memory alloy oscillators considering cloned dynamics and tangent map methods

    • Daniel M. Barreto Netto
    • Alex Brandão
    • Marcelo A. Savi

    Technical Paper 17 August 2020 Article: 475

    

23. Bearing fault identification based on convolutional neural network by different input modes

    • Tian Han
    • ZhiXin Tian
    • Andy C. C. Tan

    Technical Paper 15 August 2020 Article: 474

    

24. Predicting tensile properties of monolayer white graphene involving edge effect

    • H. F. Guo
    • Z. Q. Zhao
    • J. W. Yan

    Technical Paper 14 August 2020 Article: 473

    

25. Dynamic modeling of cables with external forces applied to the terminal load

    • Sebastião C. P. Gomes
    • Vanessa S. Oliveira
    • Guilherme M. Menezes

    Technical Paper 14 August 2020 Article: 472

    

26. Optimal response of half car vehicle model with sky-hook damper using LQR with look ahead preview control

    • L. V. V. Gopala Rao
    • S. Narayanan

    Technical Paper 14 August 2020 Article: 471

    

27. Two-degree-of-freedom flow-induced vibration suppression of a circular cylinder via externally forced rotational oscillations: comparison of active open-loop and closed-loop control systems

    • Amir Hossein Rabiee

    Technical Paper 14 August 2020 Article: 470

    

28. Nanoscale characterization of Titanium-based coatings plastic properties by dimensional analysis, FEA and Infimum resultant error criterion

    • E. Bazzaz
    • A. Darvizeh
    • M. Yarmohammad Tooski

    Technical Paper 14 August 2020 Article: 469

    

29. Differences between plate theory and lumped element model in electrostatic analysis of one-sided and two-sided CMUTs with circular microplates

    • Milad Saadatmand
    • Junghwan Kook

    Technical Paper 12 August 2020 Article: 468

    

30. A three-dimensional heat transfer modelling and experimental study on friction stir welding of dissimilar steels

    • Pardeep Pankaj
    • Avinish Tiwari
    • Sukhomay Pal

    Technical Paper 12 August 2020 Article: 467

    

31. Diffusion-bonded pulsating heat pipes: fabrication study and new channel proposal

    • L. Betancur-Arboleda
    • P. Hulse
    • M. Mantelli

    Technical Paper 11 August 2020 Article: 466

    

32. Predicting the effect of adherend dimensions on the strength of adhesively bonded joints using M5P and M5 classifiers

    • Yaşar Ayaz

    Technical Paper 11 August 2020 Article: 465

    

33. Controlling self-excited vibration using positive position feedback with time-delay

    • Akash Sarkar
    • Joy Mondal
    • S. Chatterjee

    Technical Paper 11 August 2020 Article: 464

    

34. Effect of combined multi-cell columns and exterior stiffeners on energy absorption parameters of thin-walled tubes under axial load

    • Ali Akhavan Attar
    • S. A. Rasouli
    • S. Chahardoli

    Technical Paper 11 August 2020 Article: 463

    

35. Contributions to the adaptive Monte Carlo method

    • José Eduardo Silveira Leal
    • Joyce Antunes da Silva
    • Rosenda Valdés Arencibia

    Technical Paper 11 August 2020 Article: 462

    

36. Research nonlinear vibrations of a dual-rotor system with nonlinear restoring forces

    • Jun Liu
    • Chang Wang
    • Zhiwei Luo

    Technical Paper 11 August 2020 Article: 461

    

37. In-plane and out-of-plane compressive mechanical properties of Nomex honeycombs and their prediction

    • Suchao Xie
    • Zhejun Feng
    • Wen Ma

    Technical Paper 10 August 2020 Article: 460

    

38. Integration design and parameter optimization for a novel in-wheel motor with dynamic vibration absorbers

    • Qiang Wang
    • Rui Li
    • Zongfeng Liu

    Technical Paper 10 August 2020 Article: 459

    

39. Numerical investigation of internal flow characteristics in a mixed-flow pump with eccentric impeller

    • Wei Li
    • Leilei Ji
    • Elemam Mahmouda

    Technical Paper 10 August 2020 Article: 458

    

40. Multi-material topology optimization of compliant mechanisms using regularized projected gradient approach

    • Pooya Rostami
    • Javad Marzbanrad

    Technical Paper 10 August 2020 Article: 457

    

41. Thermal error modeling of CNC milling machine tool spindle system in load machining: based on optimal specific cutting energy

    • Hai-tao Yue
    • Chen-guang Guo
    • Guang-bo Hao

    Technical Paper 09 August 2020 Article: 456

    

42. Experimental and numerical assessment of impact resistance of FMLs including one rubber layer

    • Hamid Khajeh Arzani
    • Abdulreza Kabiri Ataabadi
    • Yoosof Chaparian

    Technical Paper 09 August 2020 Article: 455

    

43. Design method of one-DOF bio-inspired mechanism based on layered constraint conditions

    • Ziqiang Zhang
    • Jinnong Liao
    • Haiyuan Li

    Technical Paper 08 August 2020 Article: 454

    

44. Formulating the optimum parameters of modified hanger system in the cable-arch bridge to restrain force fluctuation and overstressing problems

    • S. Farahmand-Tabar
    • M. Barghian

    Technical Paper 07 August 2020 Article: 453

    

45. Flow past composite cylindrical shell of porous layer with a liquid core: magnetic effect

    • Krishna Prasad Madasu
    • Tina Bucha

    Technical Paper 07 August 2020 Article: 452

    

46. Effect of intralaminar hybridization on mode I fracture toughness of natural fiber-reinforced composites

    • A. L. Pereira
    • M. D. Banea
    • A. B. Pereira

    Technical Paper 07 August 2020 Article: 451

    

47. Fracture analysis and tensile properties of perfect and defective carbon nanotubes functionalized with carbene using molecular dynamics simulations

    • S. Ajori
    • S. H. Boroushak
    • R. Ansari

    Technical Paper 06 August 2020 Article: 450

    

48. Effect of transverse arc oscillation on morphology, dilution and microstructural aspects of weld beads produced with short-circuiting transfer in GMAW

    • Mauricio Lara
    • Víctor Vergara Díaz
    • Tiago Vieira Da Cunha

    Technical Paper 05 August 2020 Article: 449

    

49. Simulation of different shapes and arrangements of holes over the leading edge of airfoil by blowing to prevent ice accretion

    • Yasser Barzanouni
    • Mofid Gorji-Bandpy
    • Hassan Basirat Tabrizi

    Technical Paper 05 August 2020 Article: 448

    

50. Mathematical modelling of the solar-driven steam reforming of methanol for a solar thermochemical micro-fluidized bed reformer: thermal performance and thermochemical conversion

    • Vitória da Fonseca Dias
    • Jornandes Dias da Silva

    Technical Paper 05 August 2020 Article: 447