1. The influence of a radial turbine volute on back-disk impingement cooling performance

   • Chao Ma
   • Kangbo Lu
   • Wenjiao Li

   Technical Paper 04 August 2020 Article: 446

   

2. Monitoring operational status of electromechanical systems using audiovisual information fusion

   • Han Yan
   • Yipeng Zhao
   • Tiejun Li

   Technical Paper 04 August 2020 Article: 445

   

3. Numerical simulation of wetland hydrodynamics and water quality

   • M. L. C. Barros
   • T. D. da Silva
   • P. C. C. Rosman

   Technical Paper 03 August 2020 Article: 444

   

4. Fault-tolerant control based on adaptive super-twisting nonsingular integral-type terminal sliding mode for a delta parallel robot

   • Mahmood Mazare
   • Mostafa Taghizadeh
   • Pegah Ghaf-Ghanbari

   Technical Paper 01 August 2020 Article: 443

   

5. Fatigue crack growth of Al 5083-H111 subjected to mixed-mode loading

   • Amir Reza Shahani
   • Iman Shakeri
   • Calvin David Rans

   Technical Paper 01 August 2020 Article: 442

   

6. Wake behavior analysis for two circular cylinders placed at several angles to the flow

   • Patrick Batista Habowski
   • Alexandre Vagtinski de Paula
   • Sergio Viçosa Möller

   Technical Paper 31 July 2020 Article: 441

   

7. Thermoeconomic evaluation of three proposals for the energy cogeneration unit powered by natural gas, biogas, or syngas

   • Rafael Magalhães de Melo Freire
   • Alex Álisson Bandeira Santos
   • Antônio Gabriel Souza Almeida

   Technical Paper 31 July 2020 Article: 440

   

8. MWCNT and COOH–MWCNT aqueous nanofluids: thermophysical and rheological characterization

   • Samuel Scarassatti Freitas
   • Vivaldo Silveira Jr
   • Alberto Ceinos Arce

   Technical Paper 31 July 2020 Article: 439

   

9. Computational modeling of viscoplastic polymeric material response during micro-indentation tests

   • Joan O’Connor
   • Bianca Bastos dos Santos
   • Daniel Alves Castello

   Technical Paper 30 July 2020 Article: 438

   

10. A new simple method for calculating notch root stress and strain of plane problems subjected to monotonic loading up to general yielding

    • Farzin Tavakkoli
    • Rahmatollah Ghajar

    Technical Paper 30 July 2020 Article: 437

    

11. The ratcheting behavior of carbon steel piping elbows under cyclic bending moment and temperature

    • S. J. Zakavi
    • Y. Aghaei

    Technical Paper 29 July 2020 Article: 436

    

12. Sensitivity study of momentum and turbulence models for subcooled boiling phenomena simulation

    • Brian de Lima Curtt
    • Francisco A. Braz Filho

    Technical Paper 28 July 2020 Article: 435

    

13. Low-speed friction riveting: a new method for joining polymer/metal hybrid structures for aerospace applications

    • N. Rajesh Jesudoss Hynes
    • N. J. Vignesh
    • P. Shenbaga Velu

    Technical Paper 27 July 2020 Article: 434

    

14. Wind farm layout optimization based on CFD simulations

    • Luís Eduardo Boni Cruz
    • Bruno Souza Carmo

    Technical Paper 27 July 2020 Article: 433

    

15. Multi-objective optimization of drilling EDM process parameters of LM13 Al alloy–10ZrB₂–5TiC hybrid composite using RSM

    • Arunbharathi Ramaswamy
    • Ashoka Varthanan Perumal

    Technical Paper 27 July 2020 Article: 432

    

16. Mechanical properties of hybrid polymer composites: a review

    • Agnivesh Kumar Sinha
    • Harendra Kumar Narang
    • Somnath Bhattacharya

    Review 27 July 2020 Article: 431

    

17. Analysis of viscosity function models used in friction stir welding

    • Y. C. Silva
    • F. J. V. Oliveira Júnior
    • C. C. Silva

    Technical Paper 26 July 2020 Article: 430

    

18. Parametric influences of fiber laser micro-machining for the generation of micro-channels on PMMA

    • A. Sen
    • B. Doloi
    • B. Bhattacharyya

    Technical Paper 25 July 2020 Article: 429

    

19. Transient response and rub-impact phenomenon of liquid lubricated non-contacting mechanical seals during external pressure fluctuation

    • Lushuai Xu
    • Jiuhui Wu
    • Xiaoyang Yuan

    Technical Paper 25 July 2020 Article: 428

    

20. Thermal error modeling of CNC milling machining spindle based on an adaptive chaos particle swarm optimization algorithm

    • Hai-tao Yue
    • Chen-guang Guo
    • Guang-bo Hao

    Technical Paper 25 July 2020 Article: 427

    

21. Analysis of the effect of modifying the thickness of a damaged and repaired plate by composite patch on the J-Integral; effect of bonding defects

    • N. Kaddouri
    • K. Madani
    • X. Feaugas

    Review 24 July 2020 Article: 426

    

22. Combined effects of pitch angle, rotational speed and site wind distribution in small HAWT performance

    • Turan Dias Oliveira
    • Luzia Aparecida Tofaneli
    • Alex Álisson Bandeira Santos

    Technical Paper 23 July 2020 Article: 425

    

23. Fatigue life prediction model of metallic materials considering crack propagation and closure effect

    • Que Wu
    • Xintian Liu
    • Xiaolan Wang

    Technical Paper 23 July 2020 Article: 424

    

24. Effect of traverse speed on microstructure and mechanical properties of friction-stir-welded third-generation Al–Li alloy

    • Sanjeev Kumar
    • Uttam Acharya
    • Subhash Chandra Saha

    Technical Paper 22 July 2020 Article: 423

    

25. Effect of the position of perpendicular pier groups in a sharp bend on flow and scour patterns: numerical simulation

    • Morteza Asadollahi
    • Mohammad Vaghefi
    • Maryam Akbari

    Technical Paper 22 July 2020 Article: 422

    

26. Dynamic characteristics of abrasive grains and machined surface features for variable axis diamond grinding of quartz glass

    • Xiaoxiao Chen
    • Heng Wang
    • Wenwu Zhang

    Technical Paper 21 July 2020 Article: 421

    

27. A comprehensive study for mechanical behavior of functionally graded porous nanobeams resting on elastic foundation

    • Shahzad Enayat
    • Mohammad Hashemian
    • Erfan Jaberzadeh

    Technical Paper 19 July 2020 Article: 420

    

28. Numerical and experimental analysis of fretting fatigue performance of the 1350-H19 aluminum alloy

    • Rodrigo L. Pereira
    • José I. M. Díaz
    • José A. Araújo

    Technical Paper 18 July 2020 Article: 419

    

29. Tracking control of an SMA-driven actuator with rate-dependent behavior using an inverse model of hysteresis

    • Saeid Shakiba
    • Aghil Yousefi-Koma
    • Moosa Ayati

    Technical Paper 18 July 2020 Article: 418

    

30. Blade planform improvement and airfoil shape optimization of helicopters in hover flight

    • Farid Shahmiri
    • Mahdi Ebrahimnejad Badihi

    Technical Paper 18 July 2020 Article: 417

    

31. Charging procedures: effects on high temperature sodium thermosyphon performance

    • Luis H. R. Cisterna
    • Gonçalo Vitto
    • Fernando H. Milanez

    Technical Paper 18 July 2020 Article: 416

    

32. Pumped hydro storage plants: a review

    • Mateus Ricardo Nogueira Vilanova
    • Alessandro Thiessen Flores
    • José Antônio Perrella Balestieri

    Review 18 July 2020 Article: 415

    

33. Fluid flow and heat transfer around single and tandem square cylinders subjected to shear flow

    • A. Sohankar
    • E. Rangraz
    • Md. Mahbub Alam

    Technical Paper 17 July 2020 Article: 414

    

34. A numerical study over the effect of curvature and adverse pressure gradient on development of flow inside gas transmission pipelines

    • Mitra Yadegari
    • Abdolamir Bak Khoshnevis

    Technical Paper 17 July 2020 Article: 413

    

35. Transverse velocity in rectangular channel bends: numerical study and development of a prediction formula

    • Meysam Bali
    • Morteza Kolahdoozan
    • Majid Jandaghi Alaee

    Technical Paper 16 July 2020 Article: 412

    

36. Predictive thermodynamic model of the performance of a stationary spark-ignition engine running on natural gas

    • Ricardo H. R. Gutiérrez
    • Ulisses A. Monteiro
    • Luiz A. Vaz

    Technical Paper 16 July 2020 Article: 411

    

37. Size-dependent analysis of a functionally graded piezoelectric micro-cylinder based on the strain gradient theory with the consideration of flexoelectric effect: plane strain problem

    • Ali Dini
    • Mahmoud Shariati
    • Mohammad Amin Nematollahi

    Technical Paper 15 July 2020 Article: 410

    

38. Viscoplastic effects on plane strain fracture of FCC and BCC single crystals

    • Eduardo Bittencourt
    • Eduardo Braun
    • Rafael Luis Moresco

    Technical Paper 15 July 2020 Article: 409

    

39. Evaluation of ethanol as additive for NO_x and PM reduction in CI engines fueled with diesel–biodiesel blends using a pump assembly

    • Vitor Pinheiro Ferreira
    • Ednildo Andrade Torres
    • Leonard Fernandes Silva

    Technical Paper 15 July 2020 Article: 408

    

40. Vibration and dynamic behavior of electrostatic size-dependent micro-plates

    • I. Karimipour
    • Y. Tadi Beni
    • H. Zeighampour

    Technical Paper 14 July 2020 Article: 407

    

41. A historical review of the theory of gravity-assists in the pre-spaceflight era

    • Rodolfo Batista Negri
    • Antônio Fernando Bertachini de Almeida Prado

    Review 14 July 2020 Article: 406

    

42. Separation of particles in spiral micro-channel using Dean’s flow fractionation

    • Puja Mitra
    • Samik Dutta
    • Abhiram Hens

    Technical Paper 13 July 2020 Article: 405

    

43. Combination of temperature and electrical conductivity on semiconductor graphite/epoxy composites

    • J. M. L. Reis
    • S. A. Martins
    • H. S. da Costa Mattos

    Technical Paper 13 July 2020 Article: 404

    

44. Improving waste incineration CHP plant efficiency by waste heat recovery for feedwater preheating process: energy, exergy, and economic (3E) analysis

    • Abdulrahman A. Alrobaian

    Technical Paper 09 July 2020 Article: 403

    

45. Simulation and experimental studies on process parameters, microstructure and mechanical properties of selective laser melting of stainless steel 316L

    • Xinzhou Zhang
    • Lan Chen
    • Naifei Ren

    Technical Paper 09 July 2020 Article: 402

    

46. Reactivity controlled compression ignition with triple injection fuel: ethanol–diesel–ethanol

    • Claudio Vidal Teixeira
    • Carlos Valois Maciel Braga
    • Sergio Leal Braga

    Technical Paper 08 July 2020 Article: 401

    

47. Review on logarithmic spiral bevel gear

    • Jianfeng Jiang
    • Qingsheng Luo
    • Minghao Li

    Review 08 July 2020 Article: 400

    

48. Ultrasonic vibration-assisted turning of Titanium alloy Ti–6Al–4V: numerical and experimental investigations

    • Rudranarayana Kandi
    • Susanta Kumar Sahoo
    • Ananda Kumar Sahoo

    Technical Paper 08 July 2020 Article: 399

    

49. A review of operational modal analysis techniques for in-service modal identification

    • Fahad Bin Zahid
    • Zhi Chao Ong
    • Shin Yee Khoo

    Review 07 July 2020 Article: 398

    

50. A rapid distortion theory-based airfoil turbulent inflow noise prediction method

    • Alexandre Martuscelli Faria
    • Joseph Youssif Saab Jr.
    • Marcos de Mattos Pimenta

    Technical Paper 07 July 2020 Article: 397