1. Performance analysis of Al₂O₃–R718 nanorefrigerant turbulent flow through a flooded chiller tube: a numerical investigation

   • Vipin Nair
   • A. D. Parekh
   • P. R. Tailor

   Technical Paper 04 June 2020 Article: 350

   

2. Experimental and finite element investigation of high-speed bone drilling: evaluation of force and temperature

   • Mohsen Sarparast
   • Majid Ghoreishi
   • Vahid Tahmasbi

   Technical Paper 04 June 2020 Article: 349

   

3. Investigation of the effect of surface crack on low-velocity impact response in hybrid laminated composite plates

   • Aydın Güneş
   • Ömer Sinan Şahin

   Technical Paper 04 June 2020 Article: 348

   

4. Flash point, kinematic viscosity and refractive index: variations and correlations of biodiesel–diesel blends

   • Dario Alviso
   • Emir Saab
   • Silvia Daniela Romano

   Technical Paper 01 June 2020 Article: 347

   

5. A framework for three-dimensional finite element analysis of unidirectional and cross-ply composite layups through localized microstructures under hygromechanical conditions

   • Deepak Jain
   • Sandeep Vats
   • Abhijit Mukherjee

   Technical Paper 28 May 2020 Article: 346

   

6. Experimental investigation about composite bearing strength

   • Francisco K. Arakaki
   • Alfredo Rocha de Faria

   Technical Paper 28 May 2020 Article: 345

   

7. Modelling and optimizing performance parameters in the wire-electro discharge machining of Al5083/B₄C composite by multi-objective response surface methodology

   • Ram Singh
   • Syed Abou Iltaf Hussain
   • Ram Naresh Rai

   Technical Paper 27 May 2020 Article: 344

   

8. The effect of punch speed on frictional contact mechanics of finite-thickness graded layer resting on the rigid foundation

   • Mehmet N. Balci

   Technical Paper 27 May 2020 Article: 343

   

9. Robust project of resonant shunt circuit for passive vibration control of composite structures

   • L. P. Ribeiro
   • A. M. G. de Lima
   • V. A. C. Silva

   Technical Paper 27 May 2020 Article: 342

   

10. Study on hole quality and surface quality of micro-drilling nickel-based single-crystal superalloy

    • Yunguang Zhou
    • Hongyang Li
    • Guoqiang Yin

    Technical Paper 27 May 2020 Article: 341

    

11. Limitations of simplified models to predict soot formation in laminar flames

    • L. Zimmer
    • F. Pereira

    Technical Paper 26 May 2020 Article: 340

    

12. On the tuning of static pull-in instability and nonlinear vibrations of functionally graded micro-resonators with three different configurations

    • Sayed Mohammad Javad Mousavi
    • Peyman Sharifi
    • Hossein Mohammadi

    Technical Paper 26 May 2020 Article: 339

    

13. Measurement method of tooth friction force for helical gears by laser displacement sensor

    • Hanjun Jiang
    • Xiaojie Sun
    • Fuhao Liu

    Technical Paper 25 May 2020 Article: 338

    

14. Influence of secondary damage on flight cycles and inspection interval for an aircraft wing panel

    • Amit Kumar Srivastava
    • P. K. Arora
    • Sharad Chandra Srivastava

    Technical Paper 25 May 2020 Article: 337

    

15. Dynamic milling stability prediction of thin-walled components based on VPC and VSS combined method

    • Li Zhang
    • Bo Hao
    • Mingqiang Dong

    Technical Paper 25 May 2020 Article: 336

    

16. Supersonic antigravity aerodynamic atomization dusting nozzle based on the Laval nozzle and probe jet

    • Tian Zhang
    • Deji Jing
    • Xi Chen

    Technical Paper 25 May 2020 Article: 335

    

17. Combining classical and component-based TPA for equivalent load identification

    • Fabio Xavier de Melo
    • Leopoldo Pisanelli Rodrigues de Oliveira

    Technical Paper 25 May 2020 Article: 334

    

18. Nonlinear dynamic characteristics analysis of planar flexible rotating beams with clearance joint

    • Zhiqun Chen
    • Linfang Qian

    Technical Paper 25 May 2020 Article: 333

    

19. A semi-analytical boundary method in investigation of dynamic parameters of functionally graded storage tank

    • Majid Khayat
    • Abdolhossein Baghlani
    • Seyed Mehdi Dehghan

    Technical Paper 25 May 2020 Article: 332

    

20. Evaluation of performance and emission characteristics of a diesel engine using split injection

    • Ankit Kesharwani
    • Rajesh Gupta

    Technical Paper 24 May 2020 Article: 331

    

21. Integration of quality characteristics models as a software-based graphical interface for machining of AA6351 aluminum alloy using abrasive water jet process

    • Dinesh Singh
    • Rajkamal S. Shukla

    Technical Paper 24 May 2020 Article: 330

    

22. Improving the precision of discrete numerical solutions using the generalized integral transform technique

    • Isabela F. Pinheiro
    • Ricardo D. Santos
    • Leonardo S. de B. Alves

    Technical Paper 24 May 2020 Article: 329

    

23. An efficient three-node triangular Mindlin–Reissner flat shell element

    • Hosein Sangtarash
    • Hamed Ghohani Arab
    • Mohammad R. Ghasemi

    Technical Paper 24 May 2020 Article: 328

    

24. On the dynamics of flame images identified through computer vision and modal methods

    • Danilo S. Chui
    • Gustavo C. Silva Neto
    • Agenor T. Fleury

    Technical Paper 23 May 2020 Article: 327

    

25. Low wind speed aerodynamics of asymmetric blade H-Darrieus wind turbine-its desired blade pitch for performance improvement in the built environment

    • Hussain Mahamed Sahed Mostafa Mazarbhuiya
    • Agnimitra Biswas
    • Kaushal Kumar Sharma

    Technical Paper 23 May 2020 Article: 326

    

26. Overall evaluation of the surface integrity in two-dimensional ultrasonic surface rolling 7050 Al alloy

    • Jianxin Zheng
    • Lixin Zhu
    • Yuanchao Ren

    Technical Paper 23 May 2020 Article: 325

    

27. Energy, exergy, and exergoeconomic evaluations of a micro-trigeneration system

    • Adriano da Silva Marques
    • Monica Carvalho
    • Carlos Antônio Cabral dos Santos

    Technical Paper 23 May 2020 Article: 324

    

28. On the effects of thermodynamic assumptions and thermoeconomic approaches for optimization and cost allocation in a gas turbine cogeneration system

    • Leonardo Rodrigues de Araújo
    • Alexandre Persuhn Morawski
    • José Joaquim Conceição Soares Santos

    Technical Paper 22 May 2020 Article: 323

    

29. Experimental research on the acoustic transmission characteristics of refractory materials

    • Changming Liu
    • Aqib
    • Yanan Wang

    Technical Paper 21 May 2020 Article: 322

    

30. A study of the influence of high-speed press bottom dead-center displacement and fluctuation on motor core products

    • Chun-Kyu Lee
    • Seung-Soo Kim
    • Jae-Woong Yun

    Technical Paper 21 May 2020 Article: 321

    

31. Numerical characterization of transient two-phase flow of nozzle under the impact of diesel fuel temperature and injector backpressure

    • Hadi Taghavifar

    Technical Paper 21 May 2020 Article: 320

    

32. Performance evaluation of novel developed biodegradable metal working fluid during turning of AISI 420 material

    • Madan Mohan Reddy Nune
    • Phaneendra Kiran Chaganti

    Technical Paper 21 May 2020 Article: 319

    

33. Experimental investigation of impact loading effects on rectangular flat panels of fiber self-compacting cementations composite with expanded steel sheet

    • H. Hatami
    • A. Dalvand
    • A. Seyedi Chegeni

    Technical Paper 21 May 2020 Article: 318

    

34. Combined influence of size effect and temperature in microscale deformation of 6063 aluminum gear

    • N. Srinivasan
    • D. Rajenthirakumar
    • G. Niranjan

    Technical Paper 20 May 2020 Article: 317

    

35. Cavitation resistance of tungsten carbide applied on AISI 1020 steel by HVOF and remelted with CO₂ laser

    • Antonio Guilherme Ronzani
    • Anderson Geraldo Marenda Pukasiewicz
    • Ana Claudia Costa de Oliveira

    Technical Paper 20 May 2020 Article: 316

    

36. Experimental investigation of heat transfer and pressure drop in a minichannel heat sink using Al₂O₃ and TiO₂–water nanofluids

    • Farhad Sadegh Moghanlou
    • Saeed Noorzadeh
    • Esmaeil Esmaeilzadeh

    Technical Paper 20 May 2020 Article: 315

    

37. Nonlinear dynamic analysis of temperature-dependent functionally graded magnetostrictive sandwich nanobeams using different beam theories

    • A. H. Ghorbanpour-Arani
    • M. Abdollahian
    • A. Ghorbanpour Arani

    Technical Paper 19 May 2020 Article: 314

    

38. Computational analysis of vortex rope in a hydroturbine of Tucuruí dam

    • Giordane J. Antunes Junior
    • Adry K. F. Lima
    • Erb F. Lins

    Technical Paper 19 May 2020 Article: 313

    

39. Experimental investigation and statistical modeling of air-assisted EDM of Al–SiC composite with an improvised tool

    • Nishant K. Singh
    • Yashvir Singh
    • Abhishek Sharma

    Technical Paper 18 May 2020 Article: 312

    

40. Research on sound field characteristics of full-ceramic angular contact ball bearing

    • Haipeng Yan
    • Yuhou Wu
    • Ke Zhang

    Technical Paper 18 May 2020 Article: 311

    

41. Experimental and numerical investigation of impact resistance of aluminum–copper cladded sheets using an energy-based damage model

    • M. R. Saeedi
    • M. R. Morovvati
    • B. Mollaei-Dariani

    Technical Paper 16 May 2020 Article: 310

    

42. Design of Bezier profile horns by using optimization for high amplification

    • Praveen Kumar Rai
    • Vinod Yadava
    • Rabindra Kumar Patel

    Technical Paper 16 May 2020 Article: 309

    

43. Development of ANN modelling for estimation of weld strength and integrated optimization for GTAW of Inconel 825 sheets used in aero engine components

    • Bishub Choudhury
    • M. Chandrasekaran
    • D. Devarasiddappa

    Technical Paper 15 May 2020 Article: 308

    

44. Practicability of metallic hybrid systems in enhancing the energy absorption capacity: expansion and buckling mechanisms

    • B. Paygozar
    • M. A. Saeimi Sadigh

    Technical Paper 15 May 2020 Article: 307

    

45. Thermal, acoustic, and dielectric behavior of epoxy-based hybrid composites using short hair fiber

    • Bishnu Prasad Nanda
    • Alok Satapathy

    Technical Paper 15 May 2020 Article: 306

    

46. SGFEM: a numerical investigation of the two-scale simulation of 3D elastic fracture

    • K. F. Santos
    • F. B. Barros

    Technical Paper 15 May 2020 Article: 305

    

47. Active vibration control of rotating laminated composite truncated conical shells through magnetostrictive layers based on first-order shear deformation theory

    • Shahin Mohammadrezazadeh
    • Ali Asghar Jafari

    Technical Paper 15 May 2020 Article: 304

    

48. Shakedown analysis of porous materials via mixed meshless methods

    • Carlos C. de La Plata Ruiz
    • Jose Luis Silveira

    Technical Paper 15 May 2020 Article: 303

    

49. Material removal analysis of hybrid EDM-assisted centrifugal abrasive flow machining process for performance enhancement

    • Parvesh Ali
    • R. S. Walia
    • Ranganath Muttanna Singari

    Technical Paper 15 May 2020 Article: 302

    

50. Trajectory tracking of an uncertain wheeled mobile robotic manipulator with a hybrid control approach

    • Hamid Reza Shafei
    • Mohsen Bahrami
    • Heidar Ali Talebi

    Technical Paper 15 May 2020 Article: 301