1. Static loads evaluation in a flexible aircraft using high-fidelity fluid–structure iteration tool (E2-FSI): extended version

   • Angelo A. Verri
   • Flávio L. S. Bussamra
   • Leonardo C. de Oliveira

   Technical Paper 04 January 2020 Article: 79

   

2. Experimental studies of Regulated Metal Deposition (RMD™) on ASTM A387 (11) steel: study of parametric influence and welding performance optimization

   • Dinbandhu
   • Vishalkumar Prajapati
   • Kumar Abhishek

   Technical Paper 02 January 2020 Article: 78

   

3. Hydraulic servo system of bilateral rolling shears for thick and wide plate

   • Jun Wang
   • Qingxue Huang
   • Qisong Qi

   Technical Paper 02 January 2020 Article: 77

   

4. Integrated agile observation satellite scheduling problem considering different memory environments: a case study

   • Yonghao Du
   • Lining Xing
   • Teng Ren

   Technical Paper 02 January 2020 Article: 76

   

5. Preliminary studies on additive manufacturing of over 95% dense 3Y zirconia parts via digital imaging projection

   • Letícia Bueno do Amaral
   • Jorge Luis Faneco Paschoa
   • Carlos Alberto Fortulan

   Technical Paper 02 January 2020 Article: 75

   

6. Closed-form solution for direct and inverse kinematic models of a parallel manipulator for robotic orbital welding

   • Eduardo José Lima II
   • Henrique Augusto de Matos Souza
   • Frederico Allevato Ramalho Filho

   Technical Paper 02 January 2020 Article: 74

   

7. Optimization of backpropagation neural network-based models in EDM process using particle swarm optimization and simulated annealing algorithms

   • Ali Saffaran
   • Masoud Azadi Moghaddam
   • Farhad Kolahan

   Technical Paper 02 January 2020 Article: 73

   

8. The influence of volume variation in a homogeneous prechamber ignition system in combustion characteristics and exhaust emissions

   • Miguel Humberto Barrientos Sandoval
   • Carlos Eduardo Castilla Alvarez
   • Ramon Molina Valle

   Technical Paper 02 January 2020 Article: 72

   

9. Comparing the weldability of AA6013-T4 aluminium alloy on DP600 dual-phase steel with laser welding and resistance spot welding

   • Isabela Atílio
   • Vágner Braga
   • Milton Sergio Fernandes de Lima

   Technical Paper 01 January 2020 Article: 71

   

10. Correction to: Outcomes of double stratification in Darcy–Forchheimer MHD flow of viscoelastic nanofluid

    • T. Hayat
    • F. Shah
    • A. Alsaedi

    Correction 24 December 2019 Article: 70

11. Effect of grease on bearing vibration performance caused by short-time high-temperature exposure

    • Can Wu
    • Ruifeng Xiong
    • Xinling Li

    Technical Paper 23 December 2019 Article: 69

    

12. Creep analysis in thick composite cylinder considering large strain

    • Gagandeep Singh Kohli
    • Tejeet Singh
    • Harwinder Singh

    Technical Paper 21 December 2019 Article: 68

    

13. Analysis of fatigue-related aspects of FCAW and GMAW butt-welded joints in a structural steel

    • Marcos Saalfeld da Silva
    • Daniel Souza
    • Louriel Oliveira Vilarinho

    Technical Paper 21 December 2019 Article: 67

    

14. Thermo-mechanical behavior of a functionally graded hollow cylinder with an elliptic hole

    • Javad Jafari Fesharaki
    • Mehran Roghani

    Technical Paper 21 December 2019 Article: 66

    

15. Experimental research on the influence of dielectrics on short electric arc machining of GH4169

    • Xiaokang Chen
    • Jianping Zhou
    • Guoyu Hu

    Technical Paper 21 December 2019 Article: 65

    

16. Reactivity-controlled compression ignition (RCCI) with double direct injection of diesel and hydrous ethanol

    • Claudio Vidal Teixeira
    • Carlos Valois Maciel Braga
    • Sergio Leal Braga

    Technical Paper 21 December 2019 Article: 64

    

17. Design and kinematic analysis of a new 3-DOF spherical parallel manipulator for a prosthetic wrist

    • José-Alfredo Leal-Naranjo
    • Mingfeng Wang
    • Horacio Rostro-Gonzalez

    Technical Paper 20 December 2019 Article: 63

    

18. Numerical simulation of bioheat transfer: a comparative study on hyperbolic and parabolic heat conduction

    • Sri Charan Akula
    • Ranjith Maniyeri

    Technical Paper 19 December 2019 Article: 62

    

19. Exact nonlocal solutions of circular nanoplates subjected to uniformly distributed loads and nonlocal concentrated forces

    • R. Faruk Yükseler

    Technical Paper 19 December 2019 Article: 61

    

20. Kinematic analysis and experimental verification of an oval noncircular bevel gears with rotational and axial translational motions

    • Yujie Hou
    • Chao Lin

    Technical Paper 18 December 2019 Article: 60

    

21. Optimizing strain energy extraction from multi-beam piezoelectric devices for heavy haul freight cars

    • Matheus Valente Lopes
    • Jony Javorski Eckert
    • Auteliano Antunes Santos Jr

    Technical Paper 18 December 2019 Article: 59

    

22. A theoretical model used for determining the stiffness of composite leaf springs with a main spring and an auxiliary spring

    • Jun Ke
    • Chen Qian
    • Yanhong Yuan

    Technical Paper 18 December 2019 Article: 58

    

23. Numerical modeling of flow stress and grain evolution of an Mg AZ31B alloy based on hot compression tests

    • R. A. R. Giorjao
    • E. F. Monlevade
    • A. P. Tschiptschin

    Technical Paper 18 December 2019 Article: 57

    

24. Helicopter stability and control derivatives identification in different flight conditions

    • Luciano Luporini Menegaldo
    • Sérgio Servilha de Oliveira
    • Ronaldo Vieira Cruz

    Technical Paper 18 December 2019 Article: 56

    

25. Investigation on the effect of reformer gas on availability terms and waste heat recovery from exhaust gases of an HCCI engine considering radiation heat transfer

    • Elaheh Neshat
    • Mohsen Asghari

    Technical Paper 18 December 2019 Article: 55

    

26. Shelf-life analysis of solid rocket engine using HTPB/AP based on kinetic-chemical parameters of DSC analysis and burn on a test bench

    • Rene F. B. Gonçalves
    • Ernesto N. Iwama
    • José A. F. F. Rocco

    Technical Paper 18 December 2019 Article: 54

    

27. On the wake interference effects for flow around tandem bodies

    • Waqas Sarwar Abbasi
    • Rashid Mahmood
    • Anam Naheed

    Technical Paper 17 December 2019 Article: 53

    

28. Integrated system for automation of process, fixture and inspection planning

    • Emad Abouel Nasr
    • Abdulrahman Al-Ahmari
    • Ali Kamrani

    Technical Paper 17 December 2019 Article: 52

    

29. Fatigue life estimation of the overloaded notched components

    • Rahman Seifi
    • Mohammad Reza Mohammadi

    Technical Paper 16 December 2019 Article: 51

    

30. The use of ethanol to determine the volume of a pycnometer used to measure the density of liquids at different temperatures and pressures

    • J. J. P. Santos Junior
    • R. G. Pereira
    • J. M. G. Gouveia

    Technical Paper 16 December 2019 Article: 50

    

31. A novel design of nanochannel structure in a micro–nanofluidic preconcentrator for electrokinetic ion enrichment

    • Wenbo Han
    • Xueye Chen

    Technical Paper 16 December 2019 Article: 49

    

32. A shaft finite element for analysis of viscoelastic tapered Timoshenko rotors

    • Amit Bhowmick
    • Smitadhi Ganguly
    • Arghya Nandi

    Technical Paper 16 December 2019 Article: 48

    

33. Numerical investigation of non-premixed and premixed rotational tubular flame: a study of flame structure and instability

    • Mehdi Bordbar
    • Shahrooz Motaghian
    • Hadi Pasdarshahri

    Technical Paper 16 December 2019 Article: 47

    

34. Study of the flow distribution in parallel micro-channels with a triangular manifold

    • Mohammad Ali Zoljalali
    • Elham Omidbakhsh Amiri

    Technical Paper 16 December 2019 Article: 46

    

35. Investigation of mechanical and tribological properties of hybrid green eggshells and graphite-reinforced aluminum composites

    • Mohammed A. Almomani
    • Mohammed T. Hayajneh
    • Mu’ayyad M. Al-Shrida

    Technical Paper 14 December 2019 Article: 45

    

36. A novel approach using CFD and neuro-fuzzy-firefly algorithm in predicting labyrinth weir discharge coefficient

    • Shahabodin Shafiei
    • Mohsen Najarchi
    • Saeid Shabanlou

    Technical Paper 14 December 2019 Article: 44

    

37. Numerical and experimental investigation of the effect of air conditioning duct on the room temperature distribution and energy efficiency

    • Abolfazl Delavari
    • Ghodrat Ghassabi
    • Mohammad Reza Saffarian

    Technical Paper 13 December 2019 Article: 43

    

38. A single-variable first-order shear deformation nonlocal theory for the flexure of isotropic nanobeams

    • Kedar S. Pakhare
    • P. J. Guruprasad
    • Rameshchandra P. Shimpi

    Technical Paper 13 December 2019 Article: 42

    

39. Assessment of the performance of airflow in an operating rooms using ceiling supply and sidewall inlet systems

    • T. M. Baracat
    • C. A. da Silva
    • F. A. Kurokawa

    Technical Paper 12 December 2019 Article: 41

    

40. Effect of particle spin on the spatio-thermal distribution of incandescent materials released from explosions

    • Eduardo M. B. Campello

    Technical Paper 12 December 2019 Article: 40

    

41. Influence of the fastening between thread–test samples in the stress–strain curves in tensile dynamic tests

    • Roberto-Alonso González-Lezcano
    • Eduardo López-Fernández
    • Gastón Sanglier-Contreras

    Technical Paper 11 December 2019 Article: 39

    

42. Real-time inclusive investigations for the selection of servo drive system of CNC machining centers

    • Kuldeep Verma
    • R. M. Belokar
    • Klimis Ntalianis

    Technical Paper 11 December 2019 Article: 38

    

43. Stress analysis of steel wire in strand based on optical lever principle and finite element calculation

    • Jun Ma
    • Yongbo Guo

    Technical Paper 10 December 2019 Article: 37

    

44. Research of transient rotor–stator interaction effect in a mixed-flow pump under part-load conditions

    • Weidong Cao
    • Wei Li
    • Ramesh K. Agarwal

    Technical Paper 10 December 2019 Article: 36

    

45. Energy recovery and utilization system of excavator boom based on flow regeneration and balance theory

    • Jinxia Liu
    • Zhiyuan Jiao
    • Wenting Liu

    Technical Paper 10 December 2019 Article: 35

    

46. Effect of welding parameters on microstructure and mechanical properties of AA7075/AA5182 alloys joined by TIG and MIG welding methods

    • Edip Çetkin
    • Yahya Hışman Çelik
    • Şemsettin Temiz

    Technical Paper 10 December 2019 Article: 34

    

47. Finite element forced vibration analysis of refined shear deformable nanocomposite graphene platelet-reinforced beams

    • Mohammad Reza Barati
    • Hossein Shahverdi

    Technical Paper 10 December 2019 Article: 33

    

48. Analysis of magnetic fluid displacement in capillaries

    • Douglas Daniel de Carvalho
    • Francisco Ricardo Cunha
    • Rafael Gabler Gontijo

    Technical Paper 09 December 2019 Article: 32

    

49. The thermal performance analyses of the solar energy-powered thermal energy storage system with MgCl₂·6H₂O as PCM

    • V. Saikrishnan
    • A. Karthikeyan
    • D. Yuvarajan

    Technical Paper 09 December 2019 Article: 31

    

50. Research on the step-climbing performance of a multi-constraint quadrilateral suspension rover based on the λ chain mechanism

    • Fei Yang
    • Shang Chen
    • Yifan Lu

    Technical Paper 09 December 2019 Article: 30