1. Investigation of random matrix applications on structural dynamics using a tensor decomposition

   • Thiago G. Ritto
   • Adriano T. Fabro

   Technical Paper 02 August 2019 Article: 352

   

2. Vibration analysis of Love nanorods using doublet mechanics theory

   • Ufuk Gul
   • Metin Aydogdu

   Technical Paper 02 August 2019 Article: 351

   

3. Experimental and numerical analyses for designing two-pot biomass cookstove

   • Rohan R. Pande
   • Sanjay K. Sharma
   • Vilas R. Kalamkar

   Technical Paper 02 August 2019 Article: 350

   

4. Effect of cutting parameters on surface residual stresses in dry turning of AISI 1035 alloy

   • K. h. Salman
   • Ammar H. Elsheikh
   • Zhang Haiou

   Technical Paper 02 August 2019 Article: 349

   

5. Multi-objective optimization design of die-sinking electric discharge machine (EDM) machining parameter for CNT-reinforced carbon fibre nanocomposite using grey relational analysis

   • Kuwar Mausam
   • Kamal Sharma
   • Ravindra P. Singh

   Technical Paper 01 August 2019 Article: 348

   

6. Systematic investigation of a flapping wing in inclined stroke-plane hovering

   • A. R. Shanmugam
   • C. H. Sohn

   Technical Paper 31 July 2019 Article: 347

   

7. Investigation on plastic deformation behaviors in hard milling of H13 steel

   • Jing Zhang
   • Song Zhang
   • Renwei Wang

   Technical Paper 31 July 2019 Article: 346

   

8. Performance analysis of impact-damaged laminate composite structures for quality assurance

   • Ibrahim M. Alarifi
   • V. Movva
   • R. Asmatulu

   Technical Paper 31 July 2019 Article: 345

   

9. Effect of different dielectric fluids on material removal rate, surface roughness, kerf width and microhardness

   • Tina Chaudhary
   • Arindam Kumar Chanda
   • Namrata Gangil

   Technical Paper 30 July 2019 Article: 344

   

10. Investigation into the contact characteristics of rough surfaces with surface tension

    • Ling Li
    • Qiang-Qiang Yun
    • Chang-Yong Cao

    Technical Paper 30 July 2019 Article: 343

    

11. Determining optimal granularity level of modular product with hierarchical clustering and modularity assessment

    • Zhong-kai Li
    • Shuai Wang
    • Wen-wei Yin

    Technical Paper 30 July 2019 Article: 342

    

12. Study on material transfer and surface properties during fiber laser cutting of A653 galvanized steel sheet

    • Vipin Kumar Sharma
    • Vinod Kumar

    Technical Paper 29 July 2019 Article: 341

    

13. Mechanical characterization of a modern epoxy adhesive for automotive industry

    • M. Q. dos Reis
    • M. D. Banea
    • R. J. C. Carbas

    Technical Paper 29 July 2019 Article: 340

    

14. Green’s functions for the fourth-order diffusion equation

    • Kymie Karina Silva Saito
    • Webe João Mansur
    • José Antonio Marques Carrer

    Review 27 July 2019 Article: 339

    

15. Thin-wall micromachining of Ti–6Al–4V using micro-wire electrical discharge machining process

    • Mahavir Singh
    • Amandeep Singh
    • J. Ramkumar

    Technical Paper 26 July 2019 Article: 338

    

16. Numerical modeling and simulation of macro- to microscale chip considering size effect for optimum milling characteristics of AA2024T351

    • W. Saleem
    • H. Ijaz
    • J. Zhang

    Technical Paper 26 July 2019 Article: 337

    

17. Theoretical, numerical and experimental analysis of bimetallic Cu–Al shaped charge’s liners and its influence on the penetration depth and the crater diameter of steel targets

    • Hossein Mehmannavaz
    • Gholmhossein Liaghat
    • Hamid Fazeli

    Technical Paper 26 July 2019 Article: 336

    

18. Numerical analysis of the interference between two elastically mounted cylinders in tandem subject to flows at low Reynolds numbers

    • Paulo R. F. Teixeira
    • Pedro P. Rechsteiner
    • Eric Didier

    Technical Paper 25 July 2019 Article: 335

    

19. Optimal configuration of a hatchback rear end considering drag and stability objectives

    • Sajjad Beigmoradi
    • Mehrdad Vahdati

    Technical Paper 24 July 2019 Article: 334

    

20. Subgrid-scale stress parameterization for anisotropic turbomachinery flow as deduced from stereoscopic particle image velocimetry measurements

    • Ghasem Akbari
    • Nader Montazerin

    Technical Paper 24 July 2019 Article: 333

    

21. Design and experimental characterization of a twin-tube MR damper for a passenger van

    • Rangaraj Madhavrao Desai
    • Mohibb E. Hussain Jamadar
    • S. C. Raja Sekaran

    Technical Paper 24 July 2019 Article: 332

    

22. Comparison of abrasive wear by rice husk of an HVOF WC–Co–Cr-based coating and an electric arc sprayed coating based on Fe–Cr–B–Si

    • Renato Camponogara Panziera
    • Wladimir Hernandez Flores
    • Ana Claudia Costa de Oliveira

    Technical Paper 24 July 2019 Article: 331

    

23. A comparative study of the mechanical and tribological behaviours of different aluminium matrix–ceramic composites

    • N. Rajesh Jesudoss Hynes
    • R. Sankaranarayanan
    • Derya Dispinar

    Technical Paper 23 July 2019 Article: 330

    

24. Barkhausen noise signal of different steels upon face-turning process

    • Vineet Dawara
    • M. Vashista
    • M. Z. KhanYusufzai

    Technical Paper 23 July 2019 Article: 329

    

25. Hybrid neural network–particle swarm optimization algorithm and neural network–genetic algorithm for the optimization of quality characteristics during CO₂ laser cutting of aluminium alloy

    • Senthilkumar Vagheesan
    • Jayaprakash Govindarajalu

    Technical Paper 22 July 2019 Article: 328

    

26. Development and evaluation with MIL and HIL simulations of a LQR-based upper-level electronic stability control

    • Zoé Magalhães
    • André Murilo
    • Renato V. Lopes

    Technical Paper 19 July 2019 Article: 327

    

27. Computational study of chemical reactions during heat and mass transfer in magnetized partially ionized nanofluid

    • Muhammad Nawaz
    • Salman Saleem
    • Shafia Rana

    Technical Paper 18 July 2019 Article: 326

    

28. Memorial to Prof. Cláudio Melo

    • Carlos Almir Monteiro de Holanda
    • Carlos Boabaid Neto
    • Luciana Wasnieveski da Silva de Luca Ramos

    Obituary 16 July 2019 Article: 325

    

29. Aeroelastic stability analysis of a wind turbine blade section with trailing edge flap using a flexible unsteady blade elements momentum theory

    • Shahrokh Shams
    • Reza Esbati Lavasani

    Technical Paper 15 July 2019 Article: 324

    

30. Multi-response optimization of electrochemical micromachining parameters for SS304 using polymer graphite electrode with NaNO₃ electrolyte based on TOPSIS technique

    • N. Pradeep
    • K. Shanmuga Sundaram
    • M. Pradeep Kumar

    Technical Paper 15 July 2019 Article: 323

    

31. Effect of warpage on the operation of a rapid cooling and heating device

    • Min Lee
    • Youn-Suk Kwon
    • Chun-Kyu Lee

    Technical Paper 15 July 2019 Article: 322

    

32. A CFD study on the correlation between the skew angle and blade number of hydrodynamic performance of a submarine propeller

    • Rahim Malmir

    Technical Paper 13 July 2019 Article: 321

    

33. Impact of magnetic field on flow past cylindrical shell using cell model

    • Krishna Prasad Madasu
    • Tina Bucha

    Technical Paper 13 July 2019 Article: 320

    

34. Effect of the interrupted aging heat treatment T6I4 on the tensile properties and fatigue resistance of AA7050 alloy

    • A. M. B. S. Antunes
    • C. A. R. P. Baptista
    • N. V. V. Mogili

    Technical Paper 12 July 2019 Article: 319

    

35. Effect of notch orientation and single overload on crack interaction in Ti–6Al–4V alloy

    • N. Yumak
    • K. Aslantas

    Technical Paper 12 July 2019 Article: 318

    

36. Optimization of cutting parameters for finish turning of 6082-T6 aluminum alloy under dry and RQL conditions

    • Rafael F. Garcia
    • Everton C. Feix
    • André J. Souza

    Technical Paper 12 July 2019 Article: 317

    

37. Traceability for measurements carried out on incremental step loading equipment

    • Marcus Vinícius Rezende Júnior
    • José Eduardo Silveira Leal
    • Rosenda Valdés Arencibia

    Technical Paper 11 July 2019 Article: 316

    

38. GMA welding metal transfer mode study by high-speed imaging and electrical signal acquisition

    • Gustavo Simões Teixeira
    • José Antônio Esmerio Mazzaferro

    Technical Paper 11 July 2019 Article: 315

    

39. STEP-NC-based machining architecture applied to industrial robots

    • Juan S. Toquica
    • Sasa Zivanovic
    • João C. E. Ferreira

    Technical Paper 10 July 2019 Article: 314

    

40. Evaluation of double-layer weld deposition technique on ASTM A182 F22 steel without post-weld heat treatment

    • Douglas Neves Garcia
    • Valtair Antônio Ferraresi
    • Carlos Alberto Mendes da Mota

    Technical Paper 10 July 2019 Article: 313

    

41. Picard–Newton iterative algorithm to solve the potential flow equation for different turbomachinery flow regimes

    • Joseph Mouallem
    • Johny Mouallem
    • Seyed Reza Amini Niaki

    Technical Paper 10 July 2019 Article: 312

    

42. Robust model-free control of a class of uncertain nonlinear systems using BELBIC: stability analysis and experimental validation

    • Saeed Khorashadizadeh
    • Seyed Mohammad Hashem Zadeh
    • Selçuk Erkaya

    Technical Paper 10 July 2019 Article: 311

    

43. Computational and experimental modeling of new forging ingots with a directional solidification: the relative heights of 1.1

    • Oleg E. Markov
    • Oleksiy V. Gerasimenko
    • Nadiia V. Ragulina

    Technical Paper 10 July 2019 Article: 310

    

44. Numerical buckling analysis of thin steel plates with centered hexagonal perforation through constructal design method

    • Caio César Cardoso da Silva
    • Daniel Helbig
    • Liércio André Isoldi

    Technical Paper 10 July 2019 Article: 309

    

45. The influence of variable feed rate on bushing and surface roughness in friction drilling

    • Latif Özler

    Review 09 July 2019 Article: 308

    

46. Comparison of interfacial heat transfer correlations for high-pressure subcooled boiling flows via CFD two-fluid model

    • Francisco A. Braz Filho
    • Marco Aurélio Fortes
    • Guilherme B. Ribeiro

    Technical Paper 09 July 2019 Article: 307

    

47. Entropy generation and regression analysis on stagnation point flow of Casson nanofluid with Arrhenius activation energy

    • Amit Kumar
    • Rajat Tripathi
    • Ramayan Singh

    Technical Paper 08 July 2019 Article: 306

    

48. EDM performance of Inconel 718 superalloy: application of multi-walled carbon nanotube (MWCNT) added dielectric media

    • Thrinadh Jadam
    • Santosh Kumar Sahu
    • Manoj Masanta

    Technical Paper 06 July 2019 Article: 305

    

49. Correction to: Optimal design of kinematic performance for a novel 2R1T parallel mechanism with pantograph units

    • Yeping Lv
    • Yong Xu
    • Jiali Chen

    Correction 04 July 2019 Article: 304