1. Finite elements numerical solution to deep beams based on layerwise displacement field

   • M. M. S. Vilar
   • M. Sartorato
   • M. R. Leite

   Technical Paper 11 September 2018 Article: 477

   

2. Kinematics of a variable stroke and compression ratio mechanism of an internal combustion engine

   • Caio H. Rufino
   • Janito V. Ferreira

   Technical Paper 11 September 2018 Article: 476

   

3. Mechanical effects of complex rheological liquid on a microorganism propelling through a rigid cervical canal: swimming at low Reynolds number

   • Z. Asghar
   • N. Ali
   • M. Sajid

   Technical Paper 11 September 2018 Article: 475

   

4. Some generalized results for Maxwell fluid flow over porous oscillatory surface with modified Fourier and Fick’s theories

   • Sami Ullah Khan
   • S. A. Shehzad
   • M. N. Bashir

   Technical Paper 10 September 2018 Article: 474

   

5. Investigating the possibility of using the underground tunnel for air-conditioning in Tehran

   • Mohammad Nazer-Nejad
   • Mohammad Reza Saffarian
   • Morteza Behbahani-Nejad

   Technical Paper 07 September 2018 Article: 473

   

6. An exact analysis on heat convection of nonlinear viscoelastic flows in isothermal microtubes under slip boundary condition

   • M. Norouzi
   • M. R. Rezaie

   Technical Paper 07 September 2018 Article: 472

   

7. Structural behavior assessment of a flexible pipe under axial compressive loads using digital image correlation

   • Rodrigo M. Amarante
   • Celso P. Pesce
   • Marcos A. Rabelo

   Technical Paper 07 September 2018 Article: 471

   

8. Significance of static–moving wedge for unsteady Falkner–Skan forced convective flow of MHD cross fluid

   • W. A. Khan
   • I. Haq
   • M. Irfan

   Technical Paper 06 September 2018 Article: 470

   

9. Optimal synthesis of a four-bar linkage for path generation using adaptive PSO

   • Navid Eqra
   • Amir Hossein Abiri
   • Ramin Vatankhah

   Technical Paper 06 September 2018 Article: 469

   

10. An assessment of the PTT model on the impacting drop problem

    • M. F. Tomé
    • R. Merejolli
    • S. McKee

    Technical Paper 05 September 2018 Article: 468

    

11. Effect of the energy input on the microstructure and mechanical behavior of AA2024-T351 joint produced by friction stir welding

    • Natália Lopes do Vale
    • Edwar Andrés Torres
    • Jorge F. dos Santos

    Technical Paper 05 September 2018 Article: 467

    

12. Wear resistance of the pressure armor submitted to deep cryogenic treatment and plasma nitriding

    • P. Herrera
    • P. V. Muterlle

    Technical Paper 05 September 2018 Article: 466

    

13. A combined numerical and experimental study on metal expansion bellows for STHE

    • S. H. Gawande

    Technical Paper 03 September 2018 Article: 465

    

14. Relevant factors for the energy consumption of industrial robots

    • Raphael Rustici Garcia
    • André Carvalho Bittencourt
    • Emilia Villani

    Technical Paper 03 September 2018 Article: 464

    

15. Investigation of S-D effect on plastic flow behavior of Armox 500T steel

    • Ambuj Saxena
    • A. Kumaraswamy
    • Madhu Vemuri

    Technical Paper 01 September 2018 Article: 463

    

16. Numerical investigations on magnetic field modeling for Carreau non-Newtonian fluid flow past an isothermal sphere

    • CH. Amanulla
    • Abderrahim Wakif
    • N. Nagendra

    Technical Paper 31 August 2018 Article: 462

    

17. Influence of a cobalt-based wire injection in austenitic coating deposited via CW-GMAW

    • Tárcio dos Santos Cabral
    • Sileno Espíndula Dias
    • Eduardo de Magalhães Braga

    Review 30 August 2018 Article: 461

    

18. Analysis of unbonded sandwich rolling defected length of the head based on experiments with aluminum and copper

    • H. Y. Wang
    • X. Li
    • J. C. Sun

    Technical Paper 29 August 2018 Article: 460

    

19. Finite element simulations for stationary Bingham fluid flow past a circular cylinder

    • R. Mahmood
    • N. Kousar
    • A. Mehmood

    Technical Paper 29 August 2018 Article: 459

    

20. Modeling and desirability approach-based multi-response optimization of WEDM parameters in machining of aluminum metal matrix composite

    • Harmesh Kumar
    • Alakesh Manna
    • Rajesh Kumar

    Technical Paper 28 August 2018 Article: 458

    

21. An immediate change in viscosity of Carreau nanofluid due to double stratified medium: application of Fourier’s and Fick’s laws

    • Mair Khan
    • T. Salahuddin
    • M. Y. Malik

    Technical Paper 28 August 2018 Article: 457

    

22. Proposed control for wing movement, type flat plate, for ornithopter autonomous robot

    • César Francisco Bogado Martínez
    • Max Suell Dutra
    • Luciano Santos Constantin Raptopoulos

    Technical Paper 28 August 2018 Article: 456

    

23. Studies of temperature distribution for laser welding of dissimilar thin sheets through finite element method

    • Pramod Kumar
    • Amar Nath Sinha

    Technical Paper 28 August 2018 Article: 455

    

24. Application of PCA-based hybrid methodologies for parameter optimization of E-jet based micro-fabrication process: a comparative study

    • Raju Das
    • Amit Kumar Ball
    • Shibendu Shekhar Roy

    Technical Paper 28 August 2018 Article: 454

    

25. CA6NM stainless steel submitted to different thermal cycles in the Gleeble weld simulator

    • B. G. Lima
    • J. C. Lourenço
    • M. I. S. T. Faria

    Technical Paper 27 August 2018 Article: 453

    

26. Thermal stratification effects on mixed convective Maxwell fluid flow with variable thermal conductivity and homogeneous/heterogeneous reactions

    • S. Shah
    • S. Hussain
    • M. Sagheer

    Technical Paper 27 August 2018 Article: 452

    

27. Minimization of bead geometry by optimization of regression equations for laser-beam bead-on-plate welded Hastelloy C-276 sheet

    • Kalinga Simant Bal
    • Jyotsna Dutta Majumdar
    • Asimava Roy Choudhury

    Technical Paper 27 August 2018 Article: 451

    

28. Influence of coconut oil on tribological behavior of carbide cutting tool insert during turning operation

    • B. S. Ajay Vardhaman
    • M. Amarnath
    • M. K. Roy

    Technical Paper 27 August 2018 Article: 450

    

29. Three-dimensional unsteady flow of Maxwell fluid with homogeneous–heterogeneous reactions and Cattaneo–Christov heat flux

    • Maria Imtiaz
    • Asmara Kiran
    • Ahmed Alsaedi

    Technical Paper 27 August 2018 Article: 449

    

30. Experimental studies on friction-stir welding of AA6061 using Inconel 601 tool

    • Nimai Haldar
    • Saurav Datta
    • Rajneesh Kumar

    Technical Paper 27 August 2018 Article: 448

    

31. Wavelet application research on tooth surface of spherical involute spiral bevel gear

    • Zhuo Zeng
    • Xieeryazidan Aday

    Technical Paper Open access 25 August 2018 Article: 447

    

32. A statistical weighted method for kinematic sensitivity analysis of parallel robots

    • Behzad Mehrafrooz
    • Mohsen Mohammadi
    • Mehdi Tale Masouleh

    Technical Paper 24 August 2018 Article: 446

    

33. Experiment and simulation to compress destroyed process of novel tailor rolled tubes

    • Rihuan Lu
    • Xianghua Liu
    • Lizhong Liu

    Technical Paper 24 August 2018 Article: 445

    

34. Measurement and estimation of the weld bead geometry in arc welding processes: the last 50 years of development

    • Guillermo Alvarez Bestard
    • Sadek Crisóstomo Absi Alfaro

    Review 23 August 2018 Article: 444

    

35. The use of function-driven shape definition method and GRA–EMM-based Taguchi method to multi-criterion blade preform optimization

    • Difeng Hu
    • Ying Liu
    • Xiangyang Zhou

    Technical Paper 23 August 2018 Article: 443

    

36. Mechanical design and preliminary tests of VS-AnkleExo

    • Ozgur Baser
    • Hasbi Kizilhan

    Technical Paper 23 August 2018 Article: 442

    

37. Effects of ramped wall temperature and concentration on viscoelastic Jeffrey’s fluid flows from a vertical permeable cone

    • S. Abdul Gaffar
    • V. Ramachandra Prasad
    • M. Venkatadri

    Technical Paper 22 August 2018 Article: 441

    

38. Cascade compound controller for direct-drive gear shift modules in automated mechanical transmission

    • Yingchao Zhou
    • Siqin Chang
    • Tongjun Guo

    Technical Paper 22 August 2018 Article: 440

    

39. Sesame and broad bean plant residue: thermogravimetric investigation and devolatilization kinetics analysis during the decomposition in an inert atmosphere

    • Saad A. El-Sayed
    • Amro A. El-baz
    • Emad H. Noseir

    Technical Paper 22 August 2018 Article: 439

    

40. Study on sealing capacity of packing element in compression packer

    • Gang Hu
    • Guorong Wang
    • Wei Wu

    Technical Paper 21 August 2018 Article: 438

    

41. Online teaching of robotic arm by human–robot interaction: end effector force/torque sensing

    • Ahmed R. J. Almusawi
    • L. Canan Dulger
    • Sadettin Kapucu

    Technical Paper 21 August 2018 Article: 437

    

42. Multi-load AGVs scheduling by application of modified memetic particle swarm optimization algorithm

    • V. K. Chawla
    • A. K. Chanda
    • S. Angra

    Technical Paper 21 August 2018 Article: 436

    

43. Influence of well and gathering systems parameters on integrated petroleum reservoir and production system simulations

    • Igor Ricardo de Souza Victorino
    • João Carlos von Hohendorff Filho
    • Denis José Schiozer

    Technical Paper 21 August 2018 Article: 435

    

44. Energy and environmental analysis of a natural gas pressure reduction station equipped with turboexpander, solar collector, and storage tank

    • Mahdi Moghimi
    • Morteza Hosseinnia
    • Mohammadali Emadi

    Technical Paper 20 August 2018 Article: 434

    

45. Economic, exergy, and the environmental analysis of the use of internal combustion engines in parallel-to-network mode for office buildings

    • Saman Chegini
    • M. A. Ehyaei

    Technical Paper 19 August 2018 Article: 433

    

46. Three-dimensional investigation of cracked tubes coated with functionally graded material under shock loading

    • Hadi Eskandari

    Technical Paper 18 August 2018 Article: 432

    

47. Research on forebody active disturbed flow characteristics of slender body in supersonic field

    • Miao Wu
    • Honghao Yue
    • Hongying Yu

    Technical Paper 18 August 2018 Article: 431

    

48. Numerical analysis of multi-scale mechanical theory of densified powder compaction

    • Fanjing Meng
    • Kun Liu
    • Tao Qin

    Technical Paper 18 August 2018 Article: 430

    

49. Fatigue life estimation in a hydrogenerator rotor with cracks using the finite element method

    • Ednei Pedro Gomes Putini
    • Fernando de Azevedo Silva

    Technical Paper 17 August 2018 Article: 429

    

50. Hygro-thermal vibration analysis of bilayer graphene sheet system via nonlocal strain gradient plate theory

    • Farzad Ebrahimi
    • Mohammad Reza Barati

    Technical Paper 17 August 2018 Article: 428